Bilstein 22-278463 is the B4 strut assembly identified for the applications and mounting position below. Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
| Years | Make | Model | Trim | Application Notes |
|---|---|---|---|---|
| 2014-2018 | Subaru | Forester | 2.0XT Premium | Use only on the listed application and position |
| 2014-2018 | Subaru | Forester | 2.0XT Touring | Use only on the listed application and position |
| 2014-2018 | Subaru | Forester | 2.5i | Use only on the listed application and position |
| 2014-2018 | Subaru | Forester | 2.5i Limited | Use only on the listed application and position |
| 2014-2018 | Subaru | Forester | 2.5i Premium | Use only on the listed application and position |
| 2014-2018 | Subaru | Forester | 2.5i Touring | Use only on the listed application and position |
| Detail | Value |
|---|---|
| Manufacturer Part Number | 22-278463 |
| Brand | Bilstein |
| Series | B4 |
| Product Type | Strut Assembly |
| Position | Front Left |
| Damper Design | Twin-tube |
| Fitment Scope | Vehicle specific |
Bilstein develops OE replacement and performance suspension systems around controlled damping, application-specific dimensions, and vehicle-specific calibration. Its B-series products range from original-equipment-style replacement dampers to monotube performance shocks and matched spring-and-damper systems.
It is a Bilstein B4 strut assembly for the vehicle applications and position shown in the Fitment table.
Is this a universal suspension part?No. This product is vehicle specific and should be used only on the listed applications.
Which mounting position does it use?The manufacturer identifies this component for the front left position.
Should shocks or struts be replaced in pairs?Follow the vehicle service procedure and inspect the opposite side. Paired axle replacement is commonly recommended when wear or mileage is similar.
Are mounts and springs included?Only the components stated in the What's Included section and shown in the retained exact-product images are supplied.
Is an alignment required after installation?An alignment check is recommended whenever installation disturbs struts, control-arm positions, or other alignment-sensitive suspension points.
Can this part be installed with worn mounts?Inspect mounts, bearings, bump stops, boots, and related hardware before installation and replace worn items with verified compatible parts.
Is professional installation recommended?Yes. Suspension work can involve stored spring energy, vehicle lifting, torque procedures, and a final safety inspection.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Shop Bilstein shocks, struts, leveling kits and suspension components at Black Ops Auto Works. Choose OE-style replacement dampers for a maintenance project, performance dampers for your spring setup, or truck suspension parts for the way you drive. Compare the B4, B6, B8 and truck-series options by vehicle, ride height and intended use.B4, B6 and B8 Shocks and StrutsB4 OE Replacement listings offer a starting point for restoring supported factory suspension applications. For passenger cars, B6 Performance serves supported stock-height setups, while B8 Performance Plus is intended for compatible lowered applications. Start with the spring and ride-height configuration you want to retain or build, then select the approved damper.The collection includes front and rear shocks, side-specific struts and selected DampTronic applications. Match factory electronic damping and suspension options before choosing a replacement. Explore related shocks and struts when planning work across both a...
View Bilstein Products
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
