-46%
Click to zoom in
Restore Controlled Suspension Response at the Correct Corner
Consistent damping helps keep the tire settled over rough pavement and during weight transfer. Bilstein 22-278593 is built for 2015-2019 Subaru Outback applications shown in the Fitment table. Key details are Bilstein B4 OE Replacement and front right.
Key Features
- Bilstein 22-278593: Bilstein B4 OE Replacement
- front right
- twin-tube
- 16.67 in collapsed, 22.56 in extended
- bracket lower/stem upper
- fixed spring seat
- UPC 651860817101
Fitment
Use Bilstein 22-278593 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 2015-2019 | Subaru | Outback | Front right; Pair with 22-278586 on the left |
| 2015-2019 | Subaru | Outback | 3.6R Limited; Front right; Pair with 22-278586 on the left |
| 2017-2019 | Subaru | Outback | 3.6R Touring; Front right; Pair with 22-278586 on the left |
| 2015-2019 | Subaru | Outback | Limited; Front right; Pair with 22-278586 on the left |
| 2015-2019 | Subaru | Outback | Premium; Front right; Pair with 22-278586 on the left |
| 2017-2019 | Subaru | Outback | Touring; Front right; Pair with 22-278586 on the left |
Specifications
| Detail | Value |
|---|---|
| Brand | Bilstein |
| Manufacturer Part Number | 22-278593 |
| Product Type | Suspension strut assembly |
| manufacturer | Bilstein |
| mpn | the listed part number |
| product_type | Suspension strut assembly |
| fitment_summary | Subaru Outback 2015-2019; front right; pair with 22-278586 on left |
| technical_details | ['Bilstein B4 OE Replacement', 'front right', 'twin-tube', '16.67 in collapsed, 22.56 in extended', 'bracket lower/stem upper', 'fixed spring seat', 'UPC 651860817101'] |
What's Included
- One front-right strut for Bilstein 22-278593
- Fixed spring seat
- Not included: Boot
- Not included: Front-left strut 22-278586
About Bilstein
Bilstein builds monotube and twin-tube dampers for OE replacement, street performance, and off-road use, with each series tuned for a defined vehicle or dimensional application.
Related Parts
- Check application-matched mounts, boots, bump stops, springs, and opposite-side dampers separately as the installation requires.
FAQ
What is the 22-278593?It is a Bilstein suspension strut assembly for 2015-2019 Subaru Outback applications shown in the Fitment table, built around Bilstein B4 OE Replacement.
What is the main benefit of this part?Bilstein B4 OE Replacement; front right.
Which applications does it fit?It is intended for 2015-2019 Subaru Outback applications shown in the Fitment table. Use the Fitment table and every listed qualifier before ordering.
What comes with this product?One front-right strut; Fixed spring seat.
What construction details should I know?Suspension strut assembly.
What should be checked before installation?Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.
How should this part be installed?Install as a direct OE replacement. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.
What warranty applies?Limited lifetime warranty.
Installation Instructions
- Install as a direct OE replacement.
- Confirm the exact part number, application, included components, and all required tools before disassembly.
- Inspect mounting points, mating parts, clearances, wiring, fluids, and fasteners before installation.
- Install according to the current manufacturer instructions and all specified torque, alignment, or calibration procedures.
California Proposition 65 Warning: Store/retailer evidence indicates a Proposition 65 warning is used; manufacturer product page links safety data but does not name a chemical. Preserve a general warning only.
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Subaru Outback Parts and Accessories
Shop Subaru Outback exhaust and cabin-protection applications by exact year, engine and floor layout. Match XT/Wilderness exhaust coverage separately from front, second-row and cargo-liner requirements. 2.4T Exhaust and Rear Clearance The displayed AWE 0FG reference targets the specified Outback 2.4T application. Confirm exact year and engine rather than extending it to all Outback powertrains. Its dual BashGuards are designed for rear clearance, while the system includes AWE’s drone-control technology. Review the complete cat-back contents and installation interfaces with existing equipment. Cabin and Cargo Protection Front/second-row sets, second-row-only liners and cargo liners protect different areas. Match exact generation, retention points and load-floor arrangement. Shared Legacy or Forester headings require exact Outback support. Do not assume an earlier cabin or cargo contour fits a later vehicle. Choose Your Part Identify year, engine and trim. Confirm exact 2.4T exhaust ...
View Subaru Outback Parts and Accessories Products