-32%
Click to zoom in
Restore Controlled Suspension Response at the Correct Corner
Consistent damping helps keep the tire settled over rough pavement and during weight transfer. Bilstein 29-256389 is built for 2014-2018 Ford Focus applications shown in the Fitment table. Key details are Bilstein B6 Performance and front left.
Key Features
- Bilstein 29-256389: Bilstein B6 Performance
- front left
- monotube
- 15.80 in collapsed, 19.64 in extended
- base cup/stem
- fixed spring seat
- UPC 651860786704
Fitment
Use Bilstein 29-256389 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 2014-2018 | Ford | Focus | S; Front left; Verify engine and chassis |
| 2014-2018 | Ford | Focus | SE; Front left; Verify engine and chassis |
| 2017-2018 | Ford | Focus | SEL; Front left; Verify engine and chassis |
| 2014-2018 | Ford | Focus | ST; Front left; Verify engine and chassis |
| 2014-2018 | Ford | Focus | Titanium; Front left; Verify engine and chassis |
Specifications
| Detail | Value |
|---|---|
| Brand | Bilstein |
| Manufacturer Part Number | 29-256389 |
| Product Type | Suspension strut assembly |
| manufacturer | Bilstein |
| mpn | the listed part number |
| product_type | Suspension strut assembly |
| fitment_summary | Ford Focus 2014-2018 including S, SE, SEL, ST and Titanium applications; front left; verify engine/chassis |
| technical_details | ['Bilstein B6 Performance', 'front left', 'monotube', '15.80 in collapsed, 19.64 in extended', 'base cup/stem', 'fixed spring seat', 'UPC 651860786704'] |
What's Included
- One front-left strut for Bilstein 29-256389
- Fixed spring seat
- Not included: Boot
- Not included: OE spring
About Bilstein
Bilstein builds monotube and twin-tube dampers for OE replacement, street performance, and off-road use, with each series tuned for a defined vehicle or dimensional application.
Related Parts
- Check application-matched mounts, boots, bump stops, springs, and opposite-side dampers separately as the installation requires.
FAQ
What is the 29-256389?It is a Bilstein suspension strut assembly for 2014-2018 Ford Focus applications shown in the Fitment table, built around Bilstein B6 Performance.
What is the main benefit of this part?Bilstein B6 Performance; front left.
Which applications does it fit?It is intended for 2014-2018 Ford Focus applications shown in the Fitment table. Use the Fitment table and every listed qualifier before ordering.
What comes with this product?One front-left strut; Fixed spring seat.
What construction details should I know?Suspension strut assembly.
What should be checked before installation?Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.
How should this part be installed?Reuse the OE spring. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.
What warranty applies?Limited lifetime warranty.
Installation Instructions
- Reuse the OE spring.
- Confirm the exact part number, application, included components, and all required tools before disassembly.
- Inspect mounting points, mating parts, clearances, wiring, fluids, and fasteners before installation.
- Install according to the current manufacturer instructions and all specified torque, alignment, or calibration procedures.
California Proposition 65 Warning: Store/retailer evidence indicates a Proposition 65 warning is used; manufacturer product page links safety data but does not name a chemical. Preserve a general warning only.
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Ford Focus Parts and Accessories
Find Ford Focus exhaust systems and conversion pieces by exact engine, trim and installed AWE system. Keep ST and RS applications and their distinct exhaust configurations explicit. Complete Exhaust or Conversion Package Identify Track, Touring or SwitchPath configuration and the actual installed system reference. A conversion kit changes a compatible system rather than supplying a complete exhaust automatically. Match exact Focus trim, production and engine coverage. Compare resonator, valve, tip and supporting installation contents for the selected package. Body Protection and Service Scope For hood protectors, preserve production range and grille/fascia mounting application. Different Focus body revisions should not be treated as one panel fit. Review installation instructions and the actual components supplied. Keep existing exhaust modifications and body changes with the application request. Choose Your Part Record year, engine and ST or RS trim. Identify installed exhaust con...
View Ford Focus Parts and Accessories Products