-32%
Sold out
Click to zoom in
Bring back controlled rear-axle movement on a TJ Wrangler
Bilstein 24-024433 is a rear B6 4600 monotube shock sized for supported 1997-2006 Jeep Wrangler applications. Its fixed damping and vehicle-specific mounts provide a direct replacement path without an adjustable setup.
Key Features
- 24-024433 exact rear-shock configuration
- B6 4600 monotube design
- Two-inch yellow shock body
- Blue straight protective boot
- Non-adjustable damping
- Manufacturer quantity of two per vehicle
Fitment
| Years | Make | Model | Verified Application and Notes |
|---|---|---|---|
| 1997-2006 | Jeep | Wrangler Sport | Rear; two required per vehicle |
| 1997-2004 | Jeep | Wrangler Sahara | Rear; two required per vehicle |
| 2003-2006 | Jeep | Wrangler Rubicon | Rear; two required per vehicle |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 24-024433 |
| Series | B6 4600 |
| Position | Rear |
| Damper Design | Monotube |
| Collapsed Length | 12.46 inches |
| Extended Length | 18.94 inches |
| Upper Mount | Bar pin |
| Lower Mount | 12.7 mm eye |
| Body Diameter | 2 inches |
| UPC | 00651860607931 |
What's Included
- One rear 24-024433 shock absorber
- A second shock, mounts, service fasteners, and installation tools are not included
About Bilstein
Bilstein develops OE replacement and performance suspension components around controlled damping, application-specific dimensions, and vehicle-specific calibration. The B6 4600 line uses monotube construction for consistent response in truck, SUV, and off-road applications.
Related Parts
- A second matching rear shock for axle-pair replacement
- Wrangler rear shock mounting hardware verified for the same chassis
- Compatible bump stops and protective boots inspected during service
FAQ
What is the 24-024433?It is a Bilstein B6 4600 rear monotube shock for supported 1997-2006 Jeep Wrangler applications.
Is this shock sold as a pair?No. This listing is for one rear shock.
How many are required per vehicle?Bilstein specifies a quantity of two per vehicle for the rear axle.
Is this shock adjustable?No. The exact shock uses fixed, non-adjustable damping.
What are the mounting styles?It uses an upper bar pin and a 12.7 mm lower eye mount.
Does it fit lifted Wranglers?No lift-height compatibility is stated in the verified data, so installation must remain within the listed dimensions and application.
What warranty applies?Bilstein lists its limited lifetime warranty, subject to the manufacturer's terms and exclusions.
Should rear shocks be replaced together?Paired rear-axle replacement is recommended when both shocks have similar age and wear.
Installation Instructions
- Confirm the package identifies 24-024433 and verify the Wrangler year and rear mounting position.
- Support the vehicle safely and unload the rear suspension according to the Jeep service procedure.
- Remove the existing rear shock and inspect both mounting points, bushings, and fasteners.
- Install the upper bar pin and lower eye without forcing or modifying the mounts.
- Torque the fasteners at the service-manual condition and verify boot and body clearance.
- Repeat with a matching shock on the opposite rear side when servicing the axle as a pair, then perform a road-safety inspection.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Bilstein
Shop Bilstein shocks, struts, leveling kits and suspension components at Black Ops Auto Works. Choose OE-style replacement dampers for a maintenance project, performance dampers for your spring setup, or truck suspension parts for the way you drive. Compare the B4, B6, B8 and truck-series options by vehicle, ride height and intended use.B4, B6 and B8 Shocks and StrutsB4 OE Replacement listings offer a starting point for restoring supported factory suspension applications. For passenger cars, B6 Performance serves supported stock-height setups, while B8 Performance Plus is intended for compatible lowered applications. Start with the spring and ride-height configuration you want to retain or build, then select the approved damper.The collection includes front and rear shocks, side-specific struts and selected DampTronic applications. Match factory electronic damping and suspension options before choosing a replacement. Explore related shocks and struts when planning work across both a...
View Bilstein Products