-32%
Click to zoom in
Control front-end motion without changing the factory stance
Bilstein 24-336239 is a front B6 4600 monotube shock for stock-height 2024-2026 Ford Ranger trucks. Its application-specific digressive valving is intended to improve control and damping consistency while retaining the original spring and mounting layout.
Key Features
- 24-336239 exact front-shock configuration
- B6 4600 monotube gas-pressure design
- Velocity-sensitive digressive piston
- Application-tuned fixed damping
- Direct-fit replacement for the original front damper
- Stock ride-height application
- Bilstein limited lifetime warranty under the manufacturer's terms
Fitment
| Years | Make | Model | Verified Application |
|---|---|---|---|
| 2024-2026 | Ford | Ranger Lariat | Front; RWD or 4WD; stock ride height |
| 2024-2026 | Ford | Ranger XL | Front; RWD or 4WD; stock ride height |
| 2024-2026 | Ford | Ranger XLT | Front; RWD or 4WD; stock ride height |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 24-336239 |
| Series | B6 4600 |
| Position | Front |
| Damper Design | Monotube gas pressure |
| Collapsed Length | 16.31 inches (414.3 mm) |
| Extended Length | 20.61 inches (523.5 mm) |
| Stroke | 4.30 inches (109.2 mm) |
| Upper Mount | Stem |
| Lower Mount | Crossbar |
| Spring Seat | Included |
| Reservoir | None |
| Finish | Yellow paint |
| UPC | 4025258946883 |
| Quantity Required | Two per vehicle; this listing is for one shock |
What's Included
- One Bilstein 24-336239 front shock absorber
- Integrated spring-seat and mounting components supplied by Bilstein for this configuration
- A second front shock, coil spring, upper mount, and vehicle service fasteners are not included unless packaged by the manufacturer
About Bilstein
Bilstein develops vehicle-specific monotube dampers for original-equipment replacement and performance applications. The B6 4600 line is engineered for stock-height trucks and SUVs where controlled damping and heat management matter in daily driving, towing, and rough-road use.
Related Parts
- A second matching front shock for axle-pair replacement
- Vehicle-specific upper mount and spring isolator inspected during installation
- Rear B6 4600 shocks verified for the same Ranger model year and ride height
FAQ
What is the 24-336239?It is the Bilstein B6 4600 front monotube shock for the verified 2024-2026 Ford Ranger applications.
Is this shock sold as a pair?No. This product listing is for one front shock absorber.
How many are required per vehicle?Bilstein specifies two front shocks per vehicle, so axle-pair service requires two units.
Does it fit both RWD and 4WD Rangers?The verified application data covers RWD and 4WD 2024-2026 Ranger Lariat, XL, and XLT models.
Does this shock change ride height?No lift or lowering is specified; it is intended for stock ride-height applications.
Is the front coil spring included?No. The original compatible spring is reused after inspection unless the service procedure requires replacement.
Is the damping adjustable?No. The B6 4600 uses fixed, application-specific damping.
Is an alignment recommended?Yes. A professional alignment check is recommended after front suspension service.
Installation Instructions
- Confirm the package identifies 24-336239 and verify the Ranger year, trim, drivetrain, front position, and stock ride height.
- Support the vehicle and remove the front spring-and-damper assembly using the current Ford service procedure.
- Inspect the coil spring, upper mount, isolators, bump stop, and service fasteners before transferring compatible components.
- Use approved spring-compression equipment and install the shock without modifying the stem, crossbar, or spring seat.
- Torque all fasteners to Ford specifications at the service-manual ride-height condition.
- Repeat with a matching shock on the opposite front side, then complete an alignment and road-safety inspection.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Bilstein
Shop Bilstein shocks, struts, leveling kits and suspension components at Black Ops Auto Works. Choose OE-style replacement dampers for a maintenance project, performance dampers for your spring setup, or truck suspension parts for the way you drive. Compare the B4, B6, B8 and truck-series options by vehicle, ride height and intended use.B4, B6 and B8 Shocks and StrutsB4 OE Replacement listings offer a starting point for restoring supported factory suspension applications. For passenger cars, B6 Performance serves supported stock-height setups, while B8 Performance Plus is intended for compatible lowered applications. Start with the spring and ride-height configuration you want to retain or build, then select the approved damper.The collection includes front and rear shocks, side-specific struts and selected DampTronic applications. Match factory electronic damping and suspension options before choosing a replacement. Explore related shocks and struts when planning work across both a...
View Bilstein Products
Ford Ranger Parts and Accessories
Shop Ford Ranger parts for bed protection, easier access, suspension projects and brake or engine service at Black Ops Auto Works. Compare BAK covers, AMP Research steps, Bilstein suspension references and Husky protection around the truck you drive. Match exact generation, cab, bed, powertrain and drivetrain before ordering.Bed Covers, Caps and Access StepsBAK references distinguish MX4 folding and Revolver X4s roll-up choices for stated bed applications. Match exact bed dimensions, rails and accessory compatibility. The Westin EXP cap Box 1 title explicitly requires Box 2; review the complete package before planning installation. AMP PowerStep, RealTruck bars and other steps need exact cab and production coverage, while rack-frame-only titles require separate hardware.Suspension and Wheel PlanningBilstein references distinguish newer Ranger 6112 front leveling, 6100 rear and 5100 options from earlier chassis applications. Eibach 2WD, Superlift 4WD and MaxTrac references address di...
View Ford Ranger Parts and Accessories Products