-32%
Click to zoom in
Restore controlled suspension response with the correct application-specific component
Bilstein 24-333047 is the B6 shock absorber identified for the applications and mounting position below. Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.
Key Features
- Application-specific Bilstein B6 calibration
- Bilstein 24-333047 is matched to the listed vehicle and mounting position
- Designed to support controlled wheel movement and consistent damping
- Use with serviceable factory mounting points and compatible surrounding components
- Exact vehicle, trim, and position coverage is limited to the Fitment table
Fitment
| Years | Make | Model | Trim | Application Notes |
|---|---|---|---|---|
| 2022-2026 | Subaru | BRZ | Limited | Use only on the listed application and position |
| 2022-2025 | Subaru | BRZ | Premium | Use only on the listed application and position |
| 2026 | Subaru | BRZ | Series.Yellow | Use only on the listed application and position |
| 2024-2026 | Subaru | BRZ | TS | Use only on the listed application and position |
| 2023 | Toyota | GR86 | 10th Anniversary Special Edition | Use only on the listed application and position |
| 2022-2026 | Toyota | GR86 | Base | Use only on the listed application and position |
| 2025 | Toyota | GR86 | Hakone Edition | Use only on the listed application and position |
| 2022-2026 | Toyota | GR86 | Premium | Use only on the listed application and position |
| 2024 | Toyota | GR86 | TRUENO Edition | Use only on the listed application and position |
| 2026 | Toyota | GR86 | Yuzu Edition | Use only on the listed application and position |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 24-333047 |
| Brand | Bilstein |
| Series | B6 |
| Product Type | Shock Absorber |
| Position | Rear |
| Fitment Scope | Vehicle specific |
What's Included
- One Bilstein B6 shock absorber for the rear position
- Bilstein 24-333047 component or matched kit shown in the retained product images
- Opposite-side components, mounts, springs, service tools, and unrelated hardware are not included unless specifically shown by the manufacturer
About Bilstein
Bilstein develops OE replacement and performance suspension systems around controlled damping, application-specific dimensions, and vehicle-specific calibration. Its B-series products range from original-equipment-style replacement dampers to monotube performance shocks and matched spring-and-damper systems.
Related Parts
- Vehicle-specific upper mounts and service hardware verified for the same chassis
- Matching opposite-side or axle components when the vehicle service procedure requires paired replacement
- Alignment and suspension inspection services after installation
FAQ
What is the 24-333047?It is a Bilstein B6 shock absorber for the vehicle applications and position shown in the Fitment table.
Is this a universal suspension part?No. This product is vehicle specific and should be used only on the listed applications.
Which mounting position does it use?The manufacturer identifies this component for the rear position.
Should shocks or struts be replaced in pairs?Follow the vehicle service procedure and inspect the opposite side. Paired axle replacement is commonly recommended when wear or mileage is similar.
Are mounts and springs included?Only the components stated in the What's Included section and shown in the retained exact-product images are supplied.
Is an alignment required after installation?An alignment check is recommended whenever installation disturbs struts, control-arm positions, or other alignment-sensitive suspension points.
Can this part be installed with worn mounts?Inspect mounts, bearings, bump stops, boots, and related hardware before installation and replace worn items with verified compatible parts.
Is professional installation recommended?Yes. Suspension work can involve stored spring energy, vehicle lifting, torque procedures, and a final safety inspection.
Installation Instructions
- Confirm the vehicle and trim match the Fitment table and the package identifies Bilstein 24-333047.
- Use an approved lift procedure, support the vehicle securely, and follow the factory service manual.
- Inspect mounts, bushings, boots, bump stops, fasteners, and nearby suspension components before assembly.
- Install the component in the manufacturer-specified position without forcing or modifying mounting points.
- Torque all fasteners at the specified ride-height condition, verify clearance, and complete an alignment check when applicable.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Bilstein
Shop Bilstein shocks, struts, leveling kits and suspension components at Black Ops Auto Works. Choose OE-style replacement dampers for a maintenance project, performance dampers for your spring setup, or truck suspension parts for the way you drive. Compare the B4, B6, B8 and truck-series options by vehicle, ride height and intended use.B4, B6 and B8 Shocks and StrutsB4 OE Replacement listings offer a starting point for restoring supported factory suspension applications. For passenger cars, B6 Performance serves supported stock-height setups, while B8 Performance Plus is intended for compatible lowered applications. Start with the spring and ride-height configuration you want to retain or build, then select the approved damper.The collection includes front and rear shocks, side-specific struts and selected DampTronic applications. Match factory electronic damping and suspension options before choosing a replacement. Explore related shocks and struts when planning work across both a...
View Bilstein Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products