-28%
Click to zoom in
Keep Damping Consistent When the Road Gets Rough
Remote-reservoir capacity helps manage heat and maintain suspension control during sustained use. Bilstein 46-263889 is built for 2014-2022 Ram 2500 applications shown in the Fitment table. Key details are Bilstein B8 5162 and two B8 5160 monotube reservoir shocks plus two matched 472 lb/in springs.
Key Features
- Bilstein 46-263889: Bilstein B8 5162
- two B8 5160 monotube reservoir shocks plus two matched 472 lb/in springs
- zinc/black
- 46 mm piston
- Ram 2500 2014-2026; front; verify exact drivetrain, cab and axle configuration
Fitment
Use Bilstein 46-263889 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 2014-2022 | Ram | 2500 | Big Horn; Front; Verify exact drivetrain, cab, and axle configuration |
| 2014-2022 | Ram | 2500 | Laramie; Front; Verify exact drivetrain, cab, and axle configuration |
| 2014-2015 | Ram | 2500 | Laramie Limited; Front; Verify exact drivetrain, cab, and axle configuration |
| 2014-2021 | Ram | 2500 | Laramie Longhorn; Front; Verify exact drivetrain, cab, and axle configuration |
| 2016-2018 | Ram | 2500 | Limited; Front; Verify exact drivetrain, cab, and axle configuration |
| 2014-2015 | Ram | 2500 | Lone Star; Front; Verify exact drivetrain, cab, and axle configuration |
| 2019-2022 | Ram | 2500 | Lone Star; Front; Verify exact drivetrain, cab, and axle configuration |
| 2014-2016 | Ram | 2500 | Outdoorsman; Front; Verify exact drivetrain, cab, and axle configuration |
| 2014-2022 | Ram | 2500 | Tradesman; Front; Verify exact drivetrain, cab, and axle configuration |
Specifications
| Detail | Value |
|---|---|
| Brand | Bilstein |
| Manufacturer Part Number | 46-263889 |
| Product Type | Front suspension leveling kit |
| manufacturer | Bilstein |
| mpn | the listed part number |
| product_type | Front suspension leveling kit |
| fitment_summary | Ram 2500 2014-2026; front; verify exact drivetrain, cab and axle configuration |
| technical_details | ['Bilstein B8 5162', 'two B8 5160 monotube reservoir shocks plus two matched 472 lb/in springs', 'zinc/black', '46 mm piston'] |
What's Included
- Two front B8 5160 remote-reservoir shocks for Bilstein 46-263889
- Two matched 472 lb/in coil springs
- Not included: Rear shocks
About Bilstein
Bilstein builds monotube and twin-tube dampers for OE replacement, street performance, and off-road use, with each series tuned for a defined vehicle or dimensional application.
Related Parts
- Check every application-matched fastener, seal, mounting part, and companion component required for the complete installation.
FAQ
What is the 46-263889?It is a Bilstein front suspension leveling kit for 2014-2022 Ram 2500 applications shown in the Fitment table, built around Bilstein B8 5162.
What is the main benefit of this part?Bilstein B8 5162; two B8 5160 monotube reservoir shocks plus two matched 472 lb/in springs.
Which applications does it fit?It is intended for 2014-2022 Ram 2500 applications shown in the Fitment table. Use the Fitment table and every listed qualifier before ordering.
What comes with this product?Two front B8 5160 remote-reservoir shocks; Two matched 472 lb/in coil springs.
What construction details should I know?Front suspension leveling kit.
What should be checked before installation?Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.
How should this part be installed?Bolt the kit into the factory front suspension locations. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.
What warranty applies?Limited 2-year warranty.
Installation Instructions
- Bolt the kit into the factory front suspension locations.
- Confirm the exact part number, application, included components, and all required tools before disassembly.
- Inspect mounting points, mating parts, clearances, wiring, fluids, and fasteners before installation.
- Install according to the current manufacturer instructions and all specified torque, alignment, or calibration procedures.
California Proposition 65 Warning: Store/retailer evidence indicates a Proposition 65 warning is used; manufacturer product page links safety data but does not name a chemical. Preserve a general warning only.
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Ram 2500 Parts and Accessories
Compare Ram 2500 exterior and bed accessories by production, cab, trim and installed body equipment. Confirm exact heavy-duty truck coverage before transferring shared Ram references. Flares, Guards and Hood Equipment Match 2019-on or earlier flare references to actual fender/trim configuration and required coverage. Review finish, supplied pieces and mounting requirements. Hood protectors can exclude Sport, Power Wagon or Rebel hoods. Universal 12-inch flaps require bracket, attachment and tire-clearance checks; they are different from custom-molded guards. Cab Windows and Bed Configuration Crew Cab deflectors need exact body/year and window coverage. Older 1500-labelled accessories require explicit 2500 support, not shared-brand assumptions. Match bed mats by actual length and RamBox configuration. Review existing liner, retention, tailgate clearance and complete supplied coverage. Choose Your Part Identify production, trim and actual hood/fenders. Match custom or universal guard...
View Ram 2500 Parts and Accessories Products