-8%
Bilstein 47-253179 B8 6112 front kit with two dampers, two springs and two spring seats
Bilstein 47-253179 front kit billet aluminum spring-seat detail
Bilstein 47-253179 matched front coil spring detail
Bilstein 47-253179 60mm front damper view without spring installed
Bilstein 47-253179 front damper and spring-seat detail
Bilstein B8 6112 assembled front spring and damper illustration; confirm supplied hardware for 47-253179
Click to zoom in

Bilstein B8 6112 Front Kit for 2015–2022 Colorado / Canyon

Bilstein
BIL47-253179
4025258850067
Suspension Packages
9 Units In Stock
$ 1,006.85 $ 923.00
$ 923.00

Match Your Colorado or Canyon Front Lift to the Actual Drivetrain

Bilstein 47-253179 combines two 60 mm front dampers with matched springs and spring seats for the manufacturer-listed 2015–2022 Chevrolet Colorado and GMC Canyon configurations. Select lift height by engine and drive type.

Key Features

  • 47-253179 is a front-axle kit with two dampers, two springs and two billet aluminum spring seats.
  • 60 mm piston, monotube dampers and snap-ring spring-seat positions.
  • 3.6L V6 4WD: manufacturer-listed front lift of 0.6–2.75 inches.
  • 3.6L V6 RWD: front lift of 0.3–2 inches; listed 2.8L diesel 4WD applications: 0–1.5 inches.
  • Exact application rows below govern engine, cab, drive and trim eligibility.

Fitment

Years Make Model Submodel Requirements
2016-2022 Chevrolet Colorado LT L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2015-2022 Chevrolet Colorado LT V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2022 Chevrolet Colorado LT V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2016-2022 Chevrolet Colorado WT L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2015-2022 Chevrolet Colorado WT V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2022 Chevrolet Colorado WT V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2016-2022 Chevrolet Colorado Z71 L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2015-2022 Chevrolet Colorado Z71 V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2022 Chevrolet Colorado Z71 V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2021-2022 GMC Canyon AT4 L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2021-2022 GMC Canyon AT4 V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2018-2019 GMC Canyon All Terrain L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2018-2020 GMC Canyon All Terrain V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2020 GMC Canyon Base V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2020 GMC Canyon Base V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2017-2022 GMC Canyon Denali L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2017-2022 GMC Canyon Denali V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2017-2022 GMC Canyon Denali V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2021-2022 GMC Canyon Elevation L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2021-2022 GMC Canyon Elevation V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2021-2022 GMC Canyon Elevation V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2021-2022 GMC Canyon Elevation Standard V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2021-2022 GMC Canyon Elevation Standard V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2016-2020 GMC Canyon SLE L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2015-2020 GMC Canyon SLE V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2020 GMC Canyon SLE V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift
2016-2020 GMC Canyon SLT L4 2.8L; Drive: 4WD; Position: Front; Provides 0-1.5" Front Lift
2015-2020 GMC Canyon SLT V6 3.6L; Drive: 4WD; Position: Front; Provides 0.6-2.75" Front Lift
2015-2020 GMC Canyon SLT V6 3.6L; Drive: RWD; Position: Front; Provides 0.3-2" Front Lift

Match 47-253179 to every applicable restriction above. A matching model year alone does not establish compatibility.

Specifications

Detail Value
Manufacturer Bilstein
MPN 47-253179
Series B8 6112
Position Front
Collapsed Length (in) 14.76
Extended Length (in) 19.51
Collapsed Length (mm) 375.0
Extended Length (mm) 495.5
Stroke/travel Length (in) 4.74
Internal Design Monotube
Finish Dampers: Zinc Plated/Springs: Black
Reservoir No
Body Design Snap Ring Grooved Body (Coilover)
Body Diameter (od) 2.65 in.
Piston Diameter 60mm
Boot Included No
Spring Seat Included Yes
Front Main Spring Rate (lbs/in) 450
Shaft Diameter 18mm
Country of Origin US
Quantity per Vehicle 1

What's Included

  • One 47-253179 front kit: two dampers, two matched springs and two billet aluminum spring seats.
  • Additional service parts and consumables are separate unless specified by the manufacturer.

About Bilstein

Bilstein develops vehicle-specific suspension dampers and matched suspension kits. This listing follows the exact kit application rather than applying a generic series lift or lowering range.

FAQ

What is the 47-253179?

A B8 6112 front suspension kit with paired dampers, matched springs and spring seats.

Does it fit every Colorado and Canyon?

No. Use the exact year, trim, engine, drive and cab restrictions in the fitment table.

How much lift does it provide?

The manufacturer lists 0.6–2.75 inches for supported V6 4WD applications, 0.3–2 inches for V6 RWD, and 0–1.5 inches for the listed diesel 4WD applications.

Are rear shocks included?

No. This is a front kit.

Does it include springs?

Yes. Two matched cold-wound coil springs are included.

Are the dampers monotube?

Yes. Bilstein specifies a monotube design with 60 mm pistons.

Can I choose any spring-seat position?

Follow the exact application and installation instructions. Do not exceed the specified range for your configuration.

Is an alignment needed?

Have suspension geometry checked and adjusted to the vehicle service specifications after installation.

Installation Instructions

  1. Verify 47-253179 against the complete manufacturer application and current installation instructions before disassembly.
  2. Use a qualified suspension technician and proper spring-compression equipment.
  3. Follow vehicle-specific fastener torques and the manufacturer spring-seat or spring installation procedure.
  4. Check clearance, suspension travel and alignment; recheck the installation as directed by the manufacturer.
Bilstein

Bilstein

Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...

View Bilstein Products
Suspension

Suspension

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

View Suspension Products
Suspension Packages

Suspension Packages

Complete suspension packages for street, track, truck, SUV, and off-road builds are stocked at Black Ops Auto Works. Shop matched coilover packages, sport lowering kits, lift and leveling systems, shock packages, handling kits, control arm packages, and staged suspension upgrades for cars, trucks, Jeeps, SUVs, and performance vehicles. Every product is filterable by year, make, model, trim, drivetrain, and suspension configuration. This collection spans Mustang, Camaro, Corvette, GM truck, Ford truck, Jeep, Toyota truck and SUV, European sport compact, and domestic performance applications. What This Suspension Packages Collection Covers Matched component systems Suspension packages pair components engineered to work together, which simplifies planning and reduces the risk of mixing incompatible parts. They can include coilovers or shocks, springs, control arms, sway bars, endlinks, alignment parts, and lift hardware. Street and Sport Lowering Packages Balanced handling and ride...

View Suspension Packages Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×