Click to zoom in
Restore Control with the Correct Bilstein Application
The Bilstein 25-311334 shock absorber is engineered for the exact vehicle and suspension configuration listed below. Performance damper matched to the listed application and suspension configuration. Match the manufacturer part number and every fitment restriction before installation.
Key Features
- Exact Bilstein manufacturer part number 25-311334.
- B8 application-specific tuning.
- Monotube gas-pressure construction for consistent damping performance.
- Rear right placement as specified for this listing.
- Direct-fit dimensions and mounting geometry for the manufacturer-listed applications.
Fitment
| Years | Make | Model | Submodels |
|---|---|---|---|
| 1996-2000, 1996-2004, 1998-2000, 1998-2004 | Toyota | Tacoma | SR5, Base, Limited, Pre Runner |
Fitment tags cover 4 manufacturer-listed year, make, model and trim combinations. Confirm suspension, drivetrain and option restrictions before ordering.
Specifications
| Manufacturer | Bilstein |
|---|---|
| MPN | 25-311334 |
| Series | B8 |
| Product type | Shocks and Struts |
| Position | Rear right |
| Damper design | Monotube gas-pressure |
| Condition | New |
What's Included
- One Bilstein 25-311334 shock absorber, unless the product title specifically identifies a multi-piece kit.
- Reuse or replace supporting mounts, boots, bump stops and hardware according to the vehicle service procedure and Bilstein instructions.
About Bilstein
Bilstein develops vehicle-specific dampers and suspension systems with application-tuned valving. Choosing the exact part number matters because dimensions, mounts, travel and calibration can differ between visually similar components.
FAQ
Is 25-311334 sold individually?Yes, unless the product title identifies it as a complete kit. Order the quantity required for your axle.
Is this the correct position?This listing is for the rear right position. Verify the opposite side or axle separately when required.
Will it fit every trim in the model range?No. Use the fitment table and confirm suspension, drivetrain and option restrictions.
Does it change ride height?Only when the title and manufacturer application explicitly state a lift or lowering range. Standard replacement dampers do not create lift by themselves.
Should related hardware be replaced?Inspect mounts, bushings, boots, bump stops and fasteners during installation and replace worn parts as required.
Installation Instructions
- Confirm the Bilstein part number and complete vehicle application before disassembly.
- Use a qualified technician and proper spring-compression equipment when servicing a strut or spring assembly.
- Follow vehicle and Bilstein torque, orientation and ride-height instructions.
- Check clearance and suspension travel, then perform an alignment when suspension geometry has been disturbed.
Explore more Bilstein suspension products and suspension upgrades.
California Proposition 65 Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products