Click to zoom in
Increase front-end protection without adding a winch platform
Body Armor 4x4 FD-19344 is a Ambush non-winch front bumper built for 2021-2023 Ford F-150. It combines application-specific mounting with trail-ready protection and a durable textured finish.
Key Features
- FD-19344 is engineered for the exact application shown below
- Fabricated from 3/16-inch and 1/4-inch cold-rolled steel
- Bolt-on installation using factory mounting locations
- OE parking-sensor compatible
- Two welded D-ring recovery mounts
- Non-winch front-bumper design
- Two-stage light-texture black powder-coat finish
- Lighting provisions for one 30-inch dual-row LED bar and cube LEDs
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | OE sensor compatible |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | FD-19344 |
| Brand | Body Armor 4x4 |
| Product Type | Ambush non-winch front bumper |
| Series | Ambush |
| Position | Front |
| Winch Compatibility | Non-winch |
| Finish | Light-texture black powder coat |
What's Included
- Body Armor 4x4 FD-19344 application-specific assembly
- One front bumper
- Integrated D-ring mounts
- Only the components shown and listed for this exact part number are included
About Body Armor 4x4
Body Armor 4x4 develops fabricated truck and off-road protection products around practical mounting, usable clearance, recovery provisions, and durable exterior finishes.
Related Parts
- Application-specific lighting that matches the verified provisions
- Recovery accessories sized for the integrated mounts when equipped
- Manufacturer-specified installation hardware and service components
FAQ
What is the FD-19344?It is the Body Armor 4x4 product described in the Specifications table for the listed vehicle application.
Which vehicles does it fit?Verified fitment is limited to 2021-2023 Ford F-150 and the notes in the Fitment table.
Is this a universal product?No. It is vehicle specific and should not be installed outside the listed application.
What finish is used?The product uses a durable two-stage light-texture black powder-coat finish.
Does installation require drilling?Use the application notes and manufacturer instructions because trimming or special preparation varies by product.
Are lights or recovery accessories included?Only the parts stated in the What's Included section are supplied. Lights, shackles, winches, and optional accessories are separate unless explicitly listed.
Can factory sensors be retained?Sensor retention is limited to the compatibility stated in the Fitment and Key Features sections.
Is professional installation recommended?Yes. These components are heavy and require safe lifting, alignment, wiring checks when equipped, and final fastener inspection.
Installation Instructions
- Confirm the package identifies Body Armor 4x4 FD-19344 and the vehicle matches the Fitment table.
- Park on a level surface, disconnect the battery when wiring is involved, and support the component with suitable lifting equipment.
- Remove only the factory components required by the manufacturer installation instructions and retain reusable hardware.
- Transfer supported factory sensors and verify light-bar clearance before final tightening.
- Start all mounting hardware by hand, align the assembly evenly, and tighten fasteners to the manufacturer's specifications.
- Verify sensor, lighting, body, tire, and suspension clearance before driving, then recheck fasteners after the initial use period.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Body Armor 4x4
Shop Body Armor 4x4 bumpers, sliders, racks and trail accessories at Black Ops Auto Works. Explore HiLine, Pro Series, Orion and other selected product lines for truck, SUV and Jeep projects. Build around the protection, cargo space and access you want, using the exact application for your vehicle.Front and Rear BumpersCompare HiLine, Pro Series, Pro Series II, Orion, Odyssey, Ambush and Eco Series applications where listed. Choose the front or rear configuration that supports your project, then check winch provisions, lighting mounts and factory-sensor requirements. Side wings, shrouds, swingouts and grille guards are separate component choices; review what the selected order includes.Rock Sliders and Side StepsExplore Revo rock sliders, Revo step sliders and conventional side steps for their stated applications. Compare the intended protective function with the access you need. Truck cab and bed dimensions, mounting design and clearance help identify the right configuration.Racks,...
View Body Armor 4x4 Products
Bumpers - Steel
Shop steel bumper systems and matching components at Black Ops Auto Works. Compare ADD Stealth Fighter, Body Armor 4x4 HiLine and Pro Series, DV8 Spec Series, Westin Outlaw, Go Rhino Trailline and ARB choices for supported trucks and Jeeps. Choose the front or rear layout, lighting provisions and documented winch or accessory support that suit the build.Front Bumpers and Winch-Ready ConfigurationsADD Stealth Fighter and other front designs offer different profiles and light-mount arrangements. Body Armor 4x4 HiLine, Ambush, ARB Zenith and Road Armor references have their own mounting and accessory plans. Compare the exact package instead of assuming every front bumper includes a winch plate.Choose a supported winch and fairlead using the specific bumper’s requirements. Reconcile separate fitting kits, cradle components, light brackets and relocation parts before installation. A stated mounting provision does not mean the winch or lights are included.Rear Bumpers and Modular SystemsB...
View Bumpers - Steel Products
Bumpers, Grilles & Guards
Shop bumpers, grilles, guards and exterior finishing parts at Black Ops Auto Works. Compare truck and Jeep bumper systems with carbon-fiber grille details, street-car bodywork, compact bull bars and application-specific mounting accessories. Choose a complete front/rear transformation or the individual component that finishes the build.Truck and Jeep Bumper SystemsADD Stealth Fighter, Body Armor HiLine and Pro Series, ARB, DV8, Westin and Go Rhino references provide different front and rear layouts. Compare complete bumper packages with fitting kits, side wings, center sections and separate service parts.Choose documented winch, light and recovery provisions around the exact manufacturer design. Review required brackets, wiring and factory-equipment relocation. A light mount or winch-ready opening does not establish that the corresponding equipment is included.Carbon-Fiber Grilles and Street-Car StylingAnderson Composites references include TRX grille upper and lower trim, F-150 gri...
View Bumpers, Grilles & Guards Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products