Sold out
Click to zoom in
Shield the rocker panels with an angled frame-mounted slider
Body Armor 4x4 TC-4127 is a Revo rock-slider pair built for 2024-2026 Toyota Tacoma Double Cab with 5-foot bed. It combines application-specific mounting with trail-ready protection and a durable textured finish.
Key Features
- TC-4127 is engineered for the exact application shown below
- 25-degree slider angle
- 1.75-inch tubing with .120-inch wall thickness
- Rear kickout adds protection while reducing hang-up risk
- 100 percent frame mounted using factory hole locations
- Hi-Lift jack support points along the slider
- No drilling required
- Fits Double Cab trucks with the 5-foot bed
- Two-stage light-texture black powder-coat finish
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2024-2026 | Toyota | Tacoma | Double Cab with 5-foot bed |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | TC-4127 |
| Brand | Body Armor 4x4 |
| Product Type | Revo rock-slider pair |
| Series | Revo |
| Angle | 25 degrees |
| Bed Length | 5 ft |
| Finish | Light-texture black powder coat |
What's Included
- Body Armor 4x4 TC-4127 application-specific assembly
- One driver-side rock slider
- One passenger-side rock slider
- Only the components shown and listed for this exact part number are included
About Body Armor 4x4
Body Armor 4x4 develops fabricated truck and off-road protection products around practical mounting, usable clearance, recovery provisions, and durable exterior finishes.
Related Parts
- Application-specific lighting that matches the verified provisions
- Recovery accessories sized for the integrated mounts when equipped
- Manufacturer-specified installation hardware and service components
FAQ
What is the TC-4127?It is the Body Armor 4x4 product described in the Specifications table for the listed vehicle application.
Which vehicles does it fit?Verified fitment is limited to 2024-2026 Toyota Tacoma Double Cab with 5-foot bed and the notes in the Fitment table.
Is this a universal product?No. It is vehicle specific and should not be installed outside the listed application.
What finish is used?The product uses a durable two-stage light-texture black powder-coat finish.
Does installation require drilling?Use the application notes and manufacturer instructions because trimming or special preparation varies by product.
Are lights or recovery accessories included?Only the parts stated in the What's Included section are supplied. Lights, shackles, winches, and optional accessories are separate unless explicitly listed.
Can factory sensors be retained?Sensor retention is limited to the compatibility stated in the Fitment and Key Features sections.
Is professional installation recommended?Yes. These components are heavy and require safe lifting, alignment, wiring checks when equipped, and final fastener inspection.
Installation Instructions
- Confirm the package identifies Body Armor 4x4 TC-4127 and the vehicle matches the Fitment table.
- Park on a level surface, disconnect the battery when wiring is involved, and support the component with suitable lifting equipment.
- Remove only the factory components required by the manufacturer installation instructions and retain reusable hardware.
- Use the factory frame-hole locations and verify that each slider is aligned before final torque.
- Start all mounting hardware by hand, align the assembly evenly, and tighten fasteners to the manufacturer's specifications.
- Verify sensor, lighting, body, tire, and suspension clearance before driving, then recheck fasteners after the initial use period.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Body Armor 4x4
Shop Body Armor 4x4 bumpers, sliders, racks and trail accessories at Black Ops Auto Works. Explore HiLine, Pro Series, Orion and other selected product lines for truck, SUV and Jeep projects. Build around the protection, cargo space and access you want, using the exact application for your vehicle.Front and Rear BumpersCompare HiLine, Pro Series, Pro Series II, Orion, Odyssey, Ambush and Eco Series applications where listed. Choose the front or rear configuration that supports your project, then check winch provisions, lighting mounts and factory-sensor requirements. Side wings, shrouds, swingouts and grille guards are separate component choices; review what the selected order includes.Rock Sliders and Side StepsExplore Revo rock sliders, Revo step sliders and conventional side steps for their stated applications. Compare the intended protective function with the access you need. Truck cab and bed dimensions, mounting design and clearance help identify the right configuration.Racks,...
View Body Armor 4x4 Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products