-10%
Click to zoom in
This Borla X-pipe is built for the verified 2017-2020 Ford F-150 application listed below. Select it by exact manufacturer part number 60638 and confirm the full engine, drivetrain, body, wheelbase, factory-exhaust, and Borla application notes before ordering.
Key Features
- Exact Borla manufacturer part number for reliable identification
- Purpose-built X-pipe configuration
- Dimensions, sound profile, exit layout, finish, and included hardware remain part-number specific
- Exhaust clearance, hanger alignment, sealing surfaces, and tip position must be checked during installation
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2017-2020 | Ford | F-150 |
Specifications
| Manufacturer | Borla |
|---|---|
| Manufacturer Part Number | 60638 |
| Product Type | X Pipes |
| Sound Profile | ATAK |
| Fitment Type | Vehicle specific, verify the complete application |
What's Included
One new Borla product identified by manufacturer part number 60638. Clamps, hangers, gaskets, tips, pipes, tools, and companion parts are included only when expressly listed for this exact part number.
About Borla
Borla develops stainless-steel exhaust systems, mufflers, tips, pipes, and related components for vehicle-specific and universal performance applications. Product selection remains exact-application and exact-part-number specific.
Related Borla Products
- Borla 2017 Ford Raptor 3.5L EcoBoost AT/MT 2wd/4wd S-Type X Pipe
- Borla 11-12 Ford Mustang GT/Shelby GT500 5.0L/5.4L 8cyl AT/MT 6speed RWD X Pipe
- Borla 15-18 Ford Mustang GT 5.0L AT/MT RWD 2.5in Resonator Delete X-Pipe
Browse the Borla collection for related exhaust systems and components.
Frequently Asked Questions
Will this Borla part fit my 2017-2020 Ford F-150?
That application is listed, but confirm the engine, drivetrain, body or cab style, wheelbase, factory exhaust layout, tip opening, and every Borla application note before ordering.
Will this change require an engine tune?
A cat-back, axle-back, tip, muffler, or post-catalyst component usually does not require tuning, but confirm the exact application, emissions configuration, oxygen-sensor locations, and local requirements before installation.
What should I inspect before installation?
Check the shipping carton and components against the exact part number, then inspect clamps, hangers, gaskets, mating flanges, clearances, tip alignment, and required reused factory hardware before removing the original exhaust.
Installation Instructions
Follow the current Borla instructions and vehicle service information for this exact part number. Let the exhaust cool, support the vehicle safely, compare all parts before removal, protect sensors and wiring, use the specified clamps and torque values, align all joints and tips without preload, confirm body and suspension clearance, check for leaks, and retorque after the first heat cycles. Professional installation is recommended.
Borla
Shop Borla cat-back and axle-back exhaust systems, mufflers, tips, connecting pipes, X-pipes, clamps, and universal exhaust components by exact manufacturer part number and verified application. Borla Exhaust ProductsBorla offers ATAK, S-Type, Touring, Pro-XS, XR-1, SwitchFire, and related stainless-steel exhaust products for vehicle-specific and universal builds. Correct selection depends on the complete year, make, model, engine, drivetrain, body or cab style, wheelbase, factory exhaust layout, sound profile, dimensions, and exact Borla part number. How to Choose the Correct Borla Part Match the exact Borla manufacturer part number Confirm the complete vehicle application and factory exhaust configuration Check engine, drivetrain, body or cab style, bed length, and wheelbase Choose the intended ATAK, S-Type, Touring, or other listed sound profile Verify inlet, outlet, body, tip, and clearance dimensions Confirm single or dual exit layout and tip position Review included pipes, cla...
View Borla Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Mid Pipes
Mid pipes, X-pipes, and H-pipes for domestic and import performance vehicles are stocked at Black Ops Auto Works. Shop Corsa PRO-Series X-pipes and H-pipes, Solo Performance connecting pipes, BRE Exhaust front pipes, MBRP mid-pipe kits, and AWE and Akrapovic link pipes for Dodge, Jeep, Ford, Corvette, Camaro, BMW, and Subaru platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 326 mid pipe SKUs across configuration and vehicle platform. What This Category Covers Mid pipes connect the headers or manifold to the rear exhaust section, and often house the high flow catalytic converters and X-pipe or H-pipe crossover design that shapes the exhaust tone and flow characteristics of the system. This collection covers high flow cats, X-pipes, H-pipes, connecting pipes, front pipes, and mid-pipe kits. Categories Included High flow catalytic converter pipes, X-pipes, H-pipes, connect...
View Mid Pipes Products