-10%
Click to zoom in
Long-Wheelbase Extension Pipe That Completes Your Borla Tacoma Exhaust Installation
The Borla BOR60763 is the factory-specified wheelbase extension pipe for the 2024-2026 Toyota Tacoma 2.4L, designed as a required adapter component for Crew Cab (Double Cab) models equipped with a long bed. BOR60763 is fabricated from T-304 stainless steel, the same aircraft-grade material used in all Borla performance exhaust systems, and features precision mandrel-bent tubing to maintain maximum flow through the pipe assembly. If your Borla Tacoma cat-back system does not fit your specific cab and bed configuration without this extension, BOR60763 is the correct solution.
Key Features
- T-304 stainless steel construction for corrosion resistance and long service life
- Mandrel-bent tubing for smooth, unrestricted exhaust flow
- Required adapter for Crew Cab Tacoma with long bed configurations
- Direct fit to Borla cat-back exhaust systems for the 2024-2026 Tacoma 2.4L
- Includes one 2.5-inch clamp for secure connection
- Borla exclusive quality manufacturing for precise dimensional accuracy
- Compatible with both i-FORCE and i-FORCE MAX (hybrid) Tacoma engines
Fitment
| Year Range | Make | Model |
|---|---|---|
| 2024-2026 | Toyota | Tacoma |
Specifications
| Detail | Value |
|---|---|
| Part Number | BOR60763 |
| Material | T-304 Stainless Steel |
| Pipe Diameter Inlet | 2.5 in. ID |
| Pipe Diameter Outlet | 2.5 in. OD |
| Application | Crew Cab with Long Bed (6 ft 1 in / 140.6 in wheelbase) |
| Includes | 1x 2.5 in. clamp |
| Compatible Engines | 2.4L i-FORCE, 2.4L i-FORCE MAX (Hybrid) |
| Warranty | Borla Million-Mile Warranty |
What's Included
- 1x BOR60763 T-304 stainless steel extension pipe
- 1x 2.5 in. stainless steel clamp
About Borla
Borla Performance Industries is the industry leader in premium performance exhaust systems, founded in 1978 and headquartered in Oxnard, California. Every Borla product is manufactured in the USA from aircraft-quality T-304 stainless steel and is backed by the Borla Million-Mile Warranty. Borla is the only manufacturer to offer a warranty of this caliber, covering the full service life of the vehicle regardless of mileage.
FAQ
What is the BOR60763?The BOR60763 is the Borla T-304 stainless steel wheelbase extension pipe for the 2024-2026 Toyota Tacoma 2.4L. It is a required adapter component for Crew Cab Tacoma models with a long bed (140.6-inch wheelbase), allowing the Borla cat-back system to fit correctly on this specific cab and bed configuration.
Do I need the BOR60763 for my Tacoma?The BOR60763 is specifically required for Crew Cab (Double Cab) Tacoma trucks with the long bed. It is not needed for Crew Cab models with the standard short bed or for Xtra Cab configurations. Check your Tacoma's wheelbase against the 140.6-inch specification to confirm if this extension is required.
Is BOR60763 compatible with the hybrid Tacoma?Yes. The BOR60763 works with both the standard 2.4L i-FORCE Tacoma and the 2.4L i-FORCE MAX hybrid Tacoma. The extension pipe is designed around the shared chassis dimensions of both powertrain configurations.
What Borla cat-back systems does BOR60763 work with?The BOR60763 extension pipe is designed to work with the Borla S-Type cat-back system for the 2024-2026 Toyota Tacoma 2.4L when installed on Crew Cab long bed configurations. Confirm the specific Borla part number for your system before ordering.
What clamp size does BOR60763 use?The BOR60763 extension pipe uses a 2.5-inch clamp, which is included with the part. The inlet and outlet are both 2.5 inches for a tight, leak-free connection within the Borla exhaust system.
Is the BOR60763 covered by the Borla Million-Mile Warranty?Yes. Like all Borla products, the BOR60763 extension pipe is backed by the Borla Million-Mile Warranty, covering defects in materials and workmanship for the full service life of the vehicle.
What is the BOR60763 made of?The BOR60763 is manufactured from T-304 stainless steel, the same aircraft-quality alloy used in all Borla exhaust components. T-304 stainless is highly resistant to rust, corrosion, and heat cycling.
Does BOR60763 require welding for installation?No. The BOR60763 connects to the Borla exhaust system using the included 2.5-inch clamp. No welding is required for installation on compatible configurations.
Installation Instructions
- Verify your Tacoma is a Crew Cab model with the 140.6-inch long-bed wheelbase before installing BOR60763
- Install the main Borla cat-back exhaust system up to the point where the extension pipe connects
- Slide the BOR60763 extension pipe into position, aligning the inlet with the cat-back forward pipe outlet
- Align the outlet of the BOR60763 with the next section of the exhaust system
- Position the included 2.5-inch clamp over the joint
- Tighten the clamp to secure the connection without over-tightening the stainless steel clamp hardware
- Verify no contact with chassis, fuel lines, or other components before starting the vehicle
- Start the engine and check all connection points for exhaust leaks
Prop 65 Warning: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
Borla
Borla exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop Borla ATAK, S-Type, and Touring cat-back systems, axle-back exhausts, SwitchFire X-pipes, H-pipes, mid-pipes, exhaust tips, and tailpipe kits for Ford Mustang GT, Dodge Challenger Hellcat, Toyota Tacoma and Tundra, Ford F-150 and Super Duty, Jeep Gladiator, RAM 1500, and Chevrolet Corvette platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,041 Borla SKUs across cat-back, axle-back, mid-pipe, and exhaust tip categories. What This Brand Covers Borla built its name on premium T304 stainless steel exhaust and a straight-through muffler design that delivers a distinct, aggressive tone without the raspy edge common on lower-cost systems. The lineup spans three core sound profiles so drivers can match a system to their build and daily use. Core Sound Profiles ATAK delivers the mo...
View Borla Products
Connecting Pipes
Connecting Pipes parts and accessories for Camaro, Charger, Grand Cherokee SRT, Caprice PPV, Jeep Cherokee, Subaru STI, BMW M, Ford Explorer, RAM 1500, Tacoma, and other exhaust builds are stocked at Black Ops Auto Works. Shop stainless connecting pipes, front pipes, extension pipes, mid pipes, up-pipes, X-pipes, H-pipes, Y-pipes, catalytic converter assemblies, and exhaust sections for street cars, track cars, trucks, and focused performance builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 201 Connecting Pipes SKUs across fitment-specific product lines. What This Connecting Pipes Collection Covers Connecting pipes join exhaust sections that do not share a direct factory connection. The collection includes front pipes, extension sections, mid pipes, up-pipes, catalytic converter assemblies, resonator sections, and vehicle-specific link pipes. Fitment Comes First Confirm t...
View Connecting Pipes Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Mid Pipes
Mid pipes, X-pipes, and H-pipes for domestic and import performance vehicles are stocked at Black Ops Auto Works. Shop Corsa PRO-Series X-pipes and H-pipes, Solo Performance connecting pipes, BRE Exhaust front pipes, MBRP mid-pipe kits, and AWE and Akrapovic link pipes for Dodge, Jeep, Ford, Corvette, Camaro, BMW, and Subaru platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 326 mid pipe SKUs across configuration and vehicle platform. What This Category Covers Mid pipes connect the headers or manifold to the rear exhaust section, and often house the high flow catalytic converters and X-pipe or H-pipe crossover design that shapes the exhaust tone and flow characteristics of the system. This collection covers high flow cats, X-pipes, H-pipes, connecting pipes, front pipes, and mid-pipe kits. Categories Included High flow catalytic converter pipes, X-pipes, H-pipes, connect...
View Mid Pipes Products