Brembo 12-15 Mercedes-Benz C250 Premium Low-Met OE Equivalent Pad - Front

OE-Grade Stopping Power Engineered for the Mercedes-Benz C250

The Brembo P50069 Premium Low-Met OE Equivalent front brake pads are built to match the exact friction profile, noise standards, and pedal feel of the factory pads installed on your 2012-2015 Mercedes-Benz C250. Brembo formulates the P50069 with a low-metallic compound that delivers progressive, fade-resistant braking through street driving and spirited commutes. Each set includes all hardware and shims needed for a direct, no-modification installation.

Key Features

• Premium low-metallic OE equivalent friction compound engineered for Mercedes-Benz C250 brake systems
• Progressive pedal feel matching original factory brake response
• Low dust formula keeps wheels cleaner longer
• Includes all shims, hardware, and lubricant for complete installation
• Direct OE replacement fitment for 2012-2015 C250 front calipers
• Manufactured by Brembo, the OE brake supplier to top European automakers
• Meets or exceeds all OE friction and noise standards

Vehicle Fitment

Specifications

What's Included

• 1x Set of Brembo P50069 front brake pads (4 pads)
• Hardware kit with shims and clips
• Installation lubricant

Frequently Asked Questions

The P50069 fits 2012-2015 Mercedes-Benz C250 Sport and Luxury trim levels for the front brake position.

Yes. The Brembo P50069 is an OE equivalent pad engineered to match the original friction specification, rotor compatibility, and noise performance of the factory Mercedes-Benz C250 front pads.

Yes. Every Brembo P50069 set includes all mounting hardware, anti-squeal shims, and lubricant required for a complete installation.

The P50069 uses a premium low-metallic compound formulated for OE-equivalent feel, low dust output, and fade resistance under everyday street driving conditions.

Brembo engineered the low-metallic compound in the P50069 to minimize brake dust accumulation on alloy wheels compared to standard metallic pads.

Yes. A proper bedding procedure of 5-7 moderate stops from 35 mph followed by a cool-down period is recommended to optimize pad performance and minimize break-in noise.

The P50069 is designed for use with OE smooth rotors. While they may be used with lightly slotted rotors, pairing with Brembo performance rotors provides the best matched system.

Brembo is the original equipment brake supplier for Mercedes-Benz, Ferrari, Lamborghini, and other European OEMs, making the P50069 a true OE-grade replacement rather than an aftermarket approximation.

Installation Instructions

1. Safely lift and support the vehicle, then remove the front wheels.
2. Remove the brake caliper bolts and slide the caliper off the rotor. Do not let it hang by the brake line.
3. Slide out the old brake pad set and remove any retaining clips from the caliper bracket.
4. Clean the caliper bracket sliding surfaces and apply the included lubricant.
5. Install the new hardware clips and seat the P50069 pads into position.
6. Using a C-clamp or caliper piston tool, compress the caliper piston fully back into the bore.
7. Reinstall the caliper over the new pads and torque the caliper bolts to spec.
8. Reinstall the wheel and torque the lug nuts to spec.
9. Pump the brake pedal several times to seat the pads before moving the vehicle.
10. Perform the bedding procedure before normal driving.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.