Click to zoom in
Reinforce vulnerable Raptor rear axle mounting tabs
Camburg CAM-120052 is built for the verified applications below and addresses the specific installation need described by the manufacturer. Review every application requirement before ordering.
Key Features
- Weld-on reinforcement for upper and lower trailing-arm mounts
- Reduces twisting at the factory axle tabs
- Spreads suspension loads across more of the axle housing
- Addresses cracking and tearing seen around factory mounts
- Made for the factory 2021-2026 Raptor rear axle layout; use CAM-120052 only on the listed application
Fitment
| Years | Make | Model | Submodel or Requirement |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | Raptor |
2021-2026 Ford F-150 Raptor; weld-on reinforcement for the factory upper and lower rear trailing-arm axle mounts.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | CAM-120052 |
| Brand | Camburg |
| Fitment Scope | Vehicle specific |
| Installation | Welding required |
| Location | Rear axle upper and lower trailing-arm mounts |
| Material | Fabricated steel gussets |
| Finish | Raw steel for welding |
| Warranty | Manufacturer warranty applies; confirm current terms with Camburg |
What's Included
- Laser-cut rear axle gusset pieces shown in the product image
- Upper and lower trailing-arm mount reinforcements
- Welding, paint, and installation labor are not included; package identity is CAM-120052
About Camburg
Camburg develops application-specific automotive components and publishes current fitment and technical information for exact manufacturer part numbers.
Related Parts
- Application-specific service hardware verified for the same vehicle
- Supporting components required by the manufacturer installation procedure
- Inspection and alignment or calibration services appropriate to the completed installation
FAQ
What is the CAM-120052?It is the rear axle gusset kit described in the fitment and specification tables.
Is this a universal part?No. It is vehicle specific and should be used only with the listed applications and requirements.
What should be verified before ordering?Confirm the model year, vehicle model, drivetrain, suspension or engine configuration, and every application note shown above.
Does professional installation make sense?Yes. Correct installation, inspection, and any required alignment or calibration should be completed by a qualified technician.
Are unrelated service parts included?No. Only the components listed in the package contents are included.
Can the application be broadened to a similar vehicle?No. Similar appearance or shared platforms do not establish compatibility.
Should surrounding components be inspected?Yes. Inspect mounting points and related systems before installation and replace worn or damaged supporting parts.
Where do the specifications come from?They are based on the current exact-part manufacturer listing and the supplier application data for this product.
Installation Instructions
- Confirm the vehicle and package label match CAM-120052 and the fitment table.
- Read the current manufacturer instructions before disassembly.
- Inspect all mounting points and supporting components.
- Install the supplied components using the manufacturer procedure and specified hardware.
- Torque fasteners and complete welding, alignment, calibration, or leak checks when applicable.
- Reinspect the completed work before road use and after the initial service interval.
Camburg
Shop Camburg control arms, radius arms, shackles and suspension-project components at Black Ops Auto Works. Compare KINETIK billet upper arms, X-Joint XL and uniball configurations, Raptor axle reinforcement and application-specific service hardware. Build the suspension around your truck, driving use and existing shocks rather than choosing by finish alone.KINETIK Upper Arms and Alignment ChoicesThe Tacoma KINETIK X-Joint XL listings combine billet-aluminum arms with a greaseable, sealed joint and adjustable heim pivots. They provide an upper-arm route for the stated chassis, with geometry intended to support caster and articulation. Gray and blue finishes are appearance choices within the correct application.KINETIK V2 uniball references provide a separate joint configuration for their supported trucks. Compare the exact arm, pivot design, travel requirements and service procedure before selecting a set. Review wheel clearance, suspension height and the final alignment with the in...
View Camburg Products
Ford F-150 Parts and Accessories
Shop Ford F-150 suspension, engine and truck-accessory references at Black Ops Auto Works. Compare ICON suspension systems, Bilstein or Fox shocks, engine-specific airflow parts and bed or cab accessories around the way you use your truck. Identify generation, engine, drivetrain, cab, bed and any Raptor or Lightning configuration before choosing parts.Suspension Systems or Individual ShocksICON titles distinguish different stages, arm configurations and production ranges. Bilstein front-kit and Fox coilover or rear-shock references cover separate drivetrain and height applications. Define the desired stance and intended use, then match actual suspension and travel requirements with the installer. A component box, rear lift part or shock pair is separate from a complete system with all required arms, brackets and alignment hardware.Engine-Specific Airflow and ServiceInjen and Roush intake references name different engines and production ranges, while aFe Raptor R and GSC Coyote camsh...
View Ford F-150 Parts and Accessories Products