-30%
Click to zoom in
Correct caster while adding strength and ground clearance
Camburg CAM-110323 is built for the verified applications below and addresses the specific installation need described by the manufacturer. Review every application requirement before ordering.
Key Features
- Three-degree caster adjustment through a reversible lower pivot chip
- Made-in-USA FK 1-inch PTFE-lined uniball rear pivots
- Heat-treated stainless-steel spacers
- Boxed 3/16-inch fabricated steel construction
- Multi-position bracket for Ford Onboard Scales and Smart Hitch sensors
- Bolt-on installation at the factory radius-arm mounts; use CAM-110323 only on the listed application
Fitment
| Years | Make | Model | Submodel or Requirement |
|---|---|---|---|
| 2023-2026 | Ford | F-250 Super Duty | Manufacturer-verified application |
| 2023-2026 | Ford | F-350 Super Duty | Manufacturer-verified application |
2023-2026 Ford F-250 Super Duty 4WD and F-350 Super Duty 4WD; designed for 2-3.5 inch leveling kits and taller 6 inch systems using the appropriate caster setting.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | CAM-110323 |
| Brand | Camburg |
| Fitment Scope | Vehicle specific |
| Finish | Camburg gray powder coat |
| Construction | CAD-designed, CNC-formed, MIG-welded 3/16-inch boxed steel |
| Adjustment | Three degrees of caster through the flip-chip pivot |
| Drivetrain | 4WD |
| Warranty | Manufacturer warranty applies; confirm current terms with Camburg |
What's Included
- Pair of Camburg radius arms
- FK uniball pivots and stainless-steel spacers
- Sensor relocation bracket
- Required installation hardware and instructions; package identity is CAM-110323
About Camburg
Camburg develops application-specific automotive components and publishes current fitment and technical information for exact manufacturer part numbers.
Related Parts
- Application-specific service hardware verified for the same vehicle
- Supporting components required by the manufacturer installation procedure
- Inspection and alignment or calibration services appropriate to the completed installation
FAQ
What is the CAM-110323?It is the uniball radius arm kit described in the fitment and specification tables.
Is this a universal part?No. It is vehicle specific and should be used only with the listed applications and requirements.
What should be verified before ordering?Confirm the model year, vehicle model, drivetrain, suspension or engine configuration, and every application note shown above.
Does professional installation make sense?Yes. Correct installation, inspection, and any required alignment or calibration should be completed by a qualified technician.
Are unrelated service parts included?No. Only the components listed in the package contents are included.
Can the application be broadened to a similar vehicle?No. Similar appearance or shared platforms do not establish compatibility.
Should surrounding components be inspected?Yes. Inspect mounting points and related systems before installation and replace worn or damaged supporting parts.
Where do the specifications come from?They are based on the current exact-part manufacturer listing and the supplier application data for this product.
Installation Instructions
- Confirm the vehicle and package label match CAM-110323 and the fitment table.
- Read the current manufacturer instructions before disassembly.
- Inspect all mounting points and supporting components.
- Install the supplied components using the manufacturer procedure and specified hardware.
- Torque fasteners and complete welding, alignment, calibration, or leak checks when applicable.
- Reinspect the completed work before road use and after the initial service interval.
Camburg
Shop Camburg control arms, radius arms, shackles and suspension-project components at Black Ops Auto Works. Compare KINETIK billet upper arms, X-Joint XL and uniball configurations, Raptor axle reinforcement and application-specific service hardware. Build the suspension around your truck, driving use and existing shocks rather than choosing by finish alone.KINETIK Upper Arms and Alignment ChoicesThe Tacoma KINETIK X-Joint XL listings combine billet-aluminum arms with a greaseable, sealed joint and adjustable heim pivots. They provide an upper-arm route for the stated chassis, with geometry intended to support caster and articulation. Gray and blue finishes are appearance choices within the correct application.KINETIK V2 uniball references provide a separate joint configuration for their supported trucks. Compare the exact arm, pivot design, travel requirements and service procedure before selecting a set. Review wheel clearance, suspension height and the final alignment with the in...
View Camburg Products
Ford F-250 Super Duty Parts and Accessories
Shop Ford F-250 Super Duty parts for suspension upgrades, engine service and truck accessories at Black Ops Auto Works. Compare ICON systems, KYB shocks, Fleece fuel-filter assemblies and Mishimoto transmission coolers. Match generation, gas or diesel engine, drivetrain and installed suspension to the work being planned.ICON Systems and Shock-Service ChoicesICON titles separate production ranges, gas and diesel applications, stages and coilover conversions. Define the desired ride-height and complete suspension plan before comparing included arms, shocks, springs and expansion-pack contents. KYB references distinguish front/rear positions, production and drivetrain; preserve any chassis-cab exclusion. A spacer, stabilizer kit or component box is separate from a complete specified system.Powerstroke Filtration and Cooling ServiceFleece under-bed and engine-mounted fuel-filter assembly titles describe different locations and application ranges. Identify the actual engine, production a...
View Ford F-250 Super Duty Parts and Accessories Products
Ford F-350 Super Duty Parts and Accessories
Shop Ford F-350 Super Duty suspension, cooling, fuel-service and truck-accessory references at Black Ops Auto Works. Compare ICON suspension systems, Fleece filter assemblies, Mishimoto coolers and cab-access choices around your truck’s intended use. Keep pickup or chassis-cab identity, single or dual rear wheels, engine and current suspension explicit.Suspension System or Shock-Service OrderICON titles separate generations, gas/diesel applications, stages and coilover conversion packages. Compare the complete spring, shock, arm and expansion-pack contents after the installer confirms the desired setup. KYB MonoMax and other shock references specify positions and configurations; a title excluding chassis cab must retain that exclusion. Hellwig rear-bar coverage and steering-stabilizer references need separate drivetrain and mounting checks.Fuel, Cooling and Exhaust ComponentsFleece engine-mounted and under-bed filter assemblies service different locations and production ranges. Mish...
View Ford F-350 Super Duty Parts and Accessories Products