Camburg CAM-330029 Body Mount Plates 2007-2023 Toyota Tacoma Tundra Tire Clearance Pair

The Camburg CAM-330029 Body Mount Plates are laser-cut steel plates engineered to address front tire-to-body-mount rubbing when running larger tires on the Toyota Tacoma and Toyota Tundra. Fitting 2016 through 2023 Tacoma models and 2007 through 2021 Tundra models, this kit eliminates the time-consuming step of fabricating your own plates by hand. The solution is to trim the factory body mount and weld in Camburg's precision-cut steel plate, giving you a clean, permanent fix whether you are running stock-width suspension or a long-travel setup.

What's Included

• 2x laser-cut steel body mount plates (sold as a pair)
• No mounting hardware included

Fitment

Product Specifications

The Body Mount Rub Problem

Running larger tires on the Toyota Tacoma and Tundra often results in front tire contact with the front body mount when the suspension cycles or the wheels turn at full lock. The factory body mount protrudes into the tire's path and cannot simply be trimmed without leaving a raw, structurally compromised edge. The correct fix is to cut the mount back and weld in a properly shaped plate that maintains the mounting surface while clearing the tire. These laser-cut Camburg plates give you a precise fit without layout and fabrication work on your own.

Why Laser Cut Steel

Laser cutting delivers tight tolerances and clean edges that are ready to fit and weld without additional prep grinding. The plate contour matches the geometry of the trimmed body mount area so it welds in with consistent fit-up. Camburg's in-house laser cutting ensures every plate in a pair is dimensionally identical, which matters when you are doing a structural weld on a frame-mounted component.

Installation Overview

Installation requires cutting the front body mount to remove the section that contacts the tire, fitting the laser-cut plate into the resulting gap, and welding it in. After welding, clean up the weld and apply a primer and topcoat or bedliner to protect the raw steel from corrosion. This is a permanent modification that requires welding capability and basic fabrication tools. No mounting hardware is included because the plates are welded in place rather than bolted. Professional installation is recommended if you do not have access to a MIG or TIG welder.

Suspension Compatibility

These body mount plates are designed to work with both stock-width front suspension and long-travel suspension setups on the Tacoma and Tundra. If you are running a Camburg long-travel kit or another aftermarket long-travel front end, the body mount clearance issue is more pronounced and the fix becomes even more important. Confirm your specific tire size and suspension configuration to ensure adequate clearance after installation.

About Camburg Engineering

Camburg Engineering has been designing and manufacturing performance suspension components for trucks and off-road vehicles since 1997. Based in Huntington Beach, California, their product line includes upper control arms, long-travel suspension kits, and supporting fabrication components. Camburg's parts are used across the full range of builds from street-driven trucks to desert racing competition vehicles.

Prop 65 Warning

WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Warranty

Camburg Engineering backs CAM-330029 with a limited warranty against defects in materials and workmanship. Contact Camburg directly for full warranty terms and claim procedures.

Frequently Asked Questions

What does the Camburg CAM-330029 body mount plate kit do?
This kit provides a pair of laser-cut steel plates used to repair the front body mount area after trimming it for tire clearance on the Toyota Tacoma and Tundra. Instead of fabricating your own plates, Camburg's laser-cut parts weld directly into place for a clean, precise result.

What years of Toyota Tacoma does CAM-330029 fit?
This kit fits the 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 Toyota Tacoma.

What years of Toyota Tundra does CAM-330029 fit?
This kit fits the 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, and 2021 Toyota Tundra.

Does CAM-330029 work with long-travel suspension?
Yes. The body mount plates are compatible with both stock-width front suspension and long-travel setups. Running a long-travel kit increases tire travel and makes body mount clearance even more critical, so these plates are a natural companion to a Camburg or other aftermarket long-travel build.

Do I need to weld these plates in?
Yes. Installation requires cutting the factory body mount and welding in the laser-cut plates. This is a permanent modification. No hardware is included because the plates are installed by welding, not bolting. Professional installation is recommended if you do not have access to a welder.

What hardware or fasteners are included?
No mounting hardware is included. The plates are designed to be welded in after the body mount has been trimmed. You will need your own welding equipment and supplies, primer, and topcoat to complete the installation.

How many plates are in the kit?
The kit is sold as a pair and includes two laser-cut steel body mount plates, one for each side of the vehicle.

Do I need to paint or coat the plates after welding?
Yes. The plates are raw steel and need to be primed and painted or coated with a rust-preventive product after welding to protect against corrosion. Bedliner, chassis paint, or a two-part epoxy primer are all suitable options depending on your build.

Is this a Prop 65 product?
Yes. California residents should be aware that this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov for more information.