Clevite Cummins B Series Camshaft Bearing Set

Engine and drivetrain bearings for domestic, import, and diesel platforms are stocked at Black Ops Auto Works. Shop main bearings, rod bearings, cam bearings, thrust bearings, wheel bearings, pilot bearings, transmission bearing kits, and differential bearing sets for HEMI 5.7, 6.1, 6.4, and 6.2 supercharged engines, LS and LT platforms, Coyote V8s, Duramax, Cummins, and Power Stroke diesels, and popular import engines like the VQ35, VQ37, VR38DETT, K20, K24, and 2JZ. Every bearing is filterable by year, make, model, engine code, and bearing clearance so the correct part ships the first time. Black Ops Auto Works carries 1250 bearing SKUs across engine internals, transmission and transfer case hardware, differential components, and wheel end assemblies. What This Category Covers Bearings are the precision-fit wear surfaces that keep an engine, transmission, and axle assembly spinning true under load. A correctly sized bearing set with the right clearance is one of the most impor...

Shop Clevite engine bearings and assembly products at Black Ops Auto Works. Find Clevite connecting rod bearings, main bearings, camshaft bearings, thrust washers, bearing guards, and related engine components for domestic, import, diesel, marine, Jeep, Nissan, Honda, Ford, Chevrolet, Cummins, Subaru, and performance applications. Clevite Connecting Rod Bearings Clevite connecting rod bearing sets are available for a wide range of engines, including Chevrolet and GMC V8 engines, Ford modular V8 engines, Cummins diesel engines, Honda K-Series and J-Series engines, Subaru EJ engines, Nissan engines, Chrysler applications, Volkswagen engines, and other performance platforms. Clevite Main Bearings Shop Clevite main bearing sets for engine rebuilds, restoration projects, diesel repairs, and high-performance applications. Product options cover engines such as Ford Power Stroke, Cummins B-Series, Chevrolet and GMC V8, Chrysler HEMI, Nissan GT-R, Honda, Lexus, Isuzu, and other domestic and ...

Choose Dodge D250 parts by engine, transmission and actual fuel-system equipment. Cummins sending-unit and damper applications must stay distinct from gasoline-engine service and from other diesel production ranges. Cummins Fuel Sending Units For a Fleece SureFlo application, identify the current fuel tank, original sender reference and lift-pump arrangement. Fleece specifies the sending unit for the appropriate externally pumped or original pickup configuration; it does not contain a lift pump. A replacement tank can change the application. Compare the manufacturer’s sender cross-reference and electrical requirements with the truck rather than relying on model year alone. Dampers and Transmission Service A Cummins damper needs exact engine and production coverage, correct mounting hardware and accessory alignment. Installation instructions can distinguish production ranges and pickup arrangements; use the procedure for the selected part number. For an automatic-transmission pan, id...

Find Dodge D350 parts by engine and transmission, including the exact Cummins configuration where fitted. Damper hardware, fuel-system components and transmission pans need distinct assembly and production checks. Cummins Dampers and Mounting Hardware Match the damper to the engine and production range, then use the specified fasteners and installation procedure for that part number. A bolt kit and a complete damper are different purchases. Record accessory-drive alignment and any modified front-engine equipment. Follow the current instructions for the exact damper rather than transferring mounting details or settings from another Cummins application. Fuel Equipment and Transmission Pans A sending unit and a lift pump perform different functions. Identify the tank, sender cross-reference and pump arrangement before choosing a Fleece SureFlo application; the sending unit does not supply a pump. An automatic pan must match the gearbox actually fitted, with appropriate clearance and fi...

Find Dodge Ram 2500 parts by generation, engine and rear-suspension equipment. Diesel intake components, load-support kits and throttle controls address different systems and need separate application checks. Diesel Intake and Engine Coverage A Banks Twin-Ram application for specified early 5.9L diesel trucks should follow its exact year, engine and EGR configuration. It is not a universal intake for every gasoline or diesel Ram 2500. Compare the manifold-system contents with the existing induction arrangement. Record changed intake pieces and engine references so hoses, controls and supporting connections are included in the plan. Rear Air Springs and Control Packages The listed Firestone rear kit for specified 2003–2012 Ram 2500/3500 trucks requires its own chassis, drivetrain and mounting coverage. Review bracket clearance and existing suspension or hitch equipment. Air-helper springs support the existing suspension without raising the manufacturer’s weight ratings. A PedalMonste...

Choose Dodge Ram 3500 parts for diesel induction, rear load support and accelerator controls. Record pickup or chassis configuration, engine and installed suspension before choosing system-specific components. Rear Load-Support Application A Firestone kit listed for specified 2003–2012 Ram 2500/3500 trucks should be matched to its exact mounting coverage. Check drivetrain, axle and clearance around existing suspension and hitch equipment. Air springs do not increase the truck’s rated capacity. Compare loaded axle weights and vehicle ratings, then follow the selected kit’s pressure and installation instructions. Diesel Intake and Accelerator Controls Banks Twin-Ram applications distinguish early 5.9L engine and EGR configurations. Compare the exact manifold system with the installed induction equipment rather than assuming coverage for later diesel or gasoline engines. PedalMonster changes accelerator response rather than horsepower. Match the connector and control interface, then re...

Find Dodge W250 diesel and transmission parts using the actual Cummins engine and automatic-transmission identity. Dampers, retention hardware, flexplates and deep pans each have distinct installation requirements. Cummins Damper and Retention Hardware Match a Fluidampr damper to the exact engine and production coverage, including the listed 1992–1998 12-valve application where appropriate. Review sensor and accessory-clearance requirements in its instructions. The Full Power kit is damper-retention hardware, not a complete harmonic damper. Compare the specified torque plate, bolts and washer requirements with the engine build and selected damper. Transmission Pans and Flexplates Identify the actual transmission before choosing an ATS pan or flexplate. Compare crank attachment, converter pattern and exact transmission coverage for a flexplate. A pan advertised with five additional quarts describes increased capacity, not the complete refill quantity. Follow the transmission and pan ...

Choose Dodge W350 diesel drivetrain components using the actual engine and transmission combination. Harmonic dampers, mounting kits, flexplates and pans should each follow their own installation specifications. Flexplate Fit and Transmission Capacity Compare engine/crank attachment, converter pattern and exact transmission application before choosing a flexplate. Retain replacement-transmission details if the truck has been converted. A deep pan’s additional capacity is separate from the total service fill. Review filter, pickup, hardware and clearance requirements and use the specified fluid and level procedure. Damper Assembly and Supporting Hardware Match a Cummins damper to exact engine production and sensor requirements. A listed 1992–1998 12-valve application is not blanket coverage for every Cummins configuration. Fluidampr’s Full Power package provides retention hardware rather than a complete damper. Compare the specified torque plate, bolts and washer requirements with th...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Engine block parts and internals for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, K-Series, VR38DETT, and Cummins diesel builds are stocked at Black Ops Auto Works. Shop main and rod bearings, engine gaskets and gasket kits, engine mounts, block off plates, block heaters, PCV valves, sleeves, engine covers, and complete engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,187 engine block SKUs across rotating assembly, sealing, mounting, and engine bay dress-up categories. What This Category Covers The Engine Block collection groups the internal and structural components that make up the bottom end and block assembly of a performance or OEM-replacement engine. Coverage spans bearings for rotating assembly refreshes, gaskets and gasket kits for sealing rebuilds, engine mounts for swap and performance builds, and engine bay dress-up pieces for HEMI, Hellcat, and ...