The COBB BMW N54 Intercooler Charge Pipe - Wrinkle Black does not have enough exact application evidence to assign safe vehicle YMM. Match manufacturer part number 7B1212, complete vehicle, engine and transmission configuration, factory equipment, required calibration, emissions eligibility, interfaces, and every product note before ordering.
Key Features
- 3 inch mandrel bent aluminum tubing for maximum flow.
- 1 aluminum charge pipe (7B1212).
- 2 large stainless steel clamps.
- 4 small stainless steel clamps.
- Wrinkle black powder coat finish resists heat and wear.
- Improves reliability over the factory plastic charge pipe.
Fitment
| Fitment Status | Fitment Verification Required |
|---|---|
| Vehicle YMM | Not assigned without exact application evidence |
| Required Verification | Confirm exact vehicle, engine, transmission, factory equipment, calibration, emissions eligibility, interfaces, and part number |
Specifications
| Manufacturer | COBB |
|---|---|
| Manufacturer Part Number | 7B1212 |
| Product Type | Intercooler Pipe Kits |
| Fitment Type | Fitment verification required |
What's Included
One new COBB product in the exact configuration and quantity identified by manufacturer part number 7B1212. Calibrations, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, tools, and companion components are included only when expressly stated for this exact part number.
About COBB
COBB develops engine-management, intake, cooling, exhaust, drivetrain, suspension, and vehicle-accessory products for supported performance platforms. Correct selection remains exact-vehicle, exact-configuration, exact-interface, and exact-part-number specific.
Related COBB Products
- Cobb BMW N55 Charge Pipe - Wrinkle Black
- COBB Intercooler Hard Pipe Kit - 2016-2018 Ford Focus RS
- Cobb 15-20 Subaru WRX Charge Pipe Kit
Browse the COBB collection for related tuning, intake, cooling, exhaust, drivetrain, and chassis products.
Frequently Asked Questions
Why is fitment verification required for this COBB product?
Exact vehicle application evidence is not complete enough for safe YMM. Confirm the vehicle, drivetrain, factory equipment, calibration, emissions eligibility, interfaces, and exact part number before ordering.
Are all supporting parts included?
Only components expressly listed for the exact manufacturer part number are included. Tuning, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, and companion components may be separate.
Is tuning or calibration required after installation?
Requirements depend on the exact product and vehicle. Intake, fuel, boost, turbo, and engine-management changes may require a compatible calibration before operation.
Installation Instructions
Follow the current COBB and factory service instructions for this exact part number. Verify fitment, factory equipment, emissions eligibility, required calibration, software and firmware, interfaces, hardware, fluid or electrical connections, and clearances before installation. Inspect the completed work and confirm safe operation before full-load use.
COBB
Shop COBB performance parts for a coordinated tuning, airflow or chassis project at Black Ops Auto Works. Explore Accessport systems, SF and Redline intake products, intercooler components, fuel-system upgrades and shifting accessories. Choose platform-specific parts around your current modifications and the driving experience you want.Accessport and Fuel-System ChoicesAccessport references distinguish exact vehicle, production range, transmission, region and hybrid or non-hybrid configurations. Review current support, available features and calibration requirements for the specific unit. Flex-fuel upgrade, sensor and fuel-pressure kits have separate contents and companion-part requirements; plan the complete setup with your calibrator.SF, Redline and Charge-Air ComponentsCompare complete intake systems with filters, scoops, inlet tubes and separate hardware. Redline listings include carbon-fiber intake and engine-bay choices in specified finishes. Front-mount intercooler cores and ...
View COBB Products
Forced Induction
Shop forced induction parts, turbochargers, supercharger kits, intercoolers and boost-control components at Black Ops Auto Works. Explore direct-fit upgrades and components for custom builds, plus blow off valves, wastegates, charge pipes, turbo inlets and replacement hardware. Match your engine, existing equipment and manufacturer part number to choose the right component for the job.The collection also includes Nitrous Express nitrous systems and Snow Performance water-methanol injection products. These are separate power-adder and charge-cooling options with their own fuel, control and installation requirements. A shared vehicle application does not make every component in a boosted build interchangeable.Shop Forced Induction Parts by SystemStart with the part of the system you are replacing or upgrading. A complete vehicle-specific kit, a standalone turbocharger and a replacement valve seal kit are different purchases; check the contents of the exact listing. Product family Wha...
View Forced Induction Products
Intercooler Components
Intercooler components for turbocharged and supercharged gas and diesel platforms are stocked at Black Ops Auto Works. Shop intercooler piping kits, silicone couplers, T-bolt clamps, end tanks, core upgrades, and intercooler hardware for daily driven trucks, JDM turbo platforms, European turbo cars, and domestic forced induction builds. Every product is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 903 intercooler component SKUs spanning gas and diesel applications. What This Collection Covers Intercooler components are the hardware that moves and cools compressed air between the turbo or supercharger and the intake manifold. This collection covers everything short of a complete intercooler core, including piping, couplers, clamps, brackets, end tanks, and diesel specific hot side and cold side hardware for trucks running higher boost and towing loads. Categories Included Aluminum and silicone intercoo...
View Intercooler Components Products
Intercooler Pipe Kits
Intercooler pipe kits and charge pipe upgrades for turbocharged street cars, trucks, and track builds are stocked at Black Ops Auto Works. Shop aluminum charge pipes, boost tubes, cold-side pipes, hot-side pipes, silicone couplers, T-bolt clamps, throttle-body connections, turbo outlet pipes, front-mount routing, and direct-fit intercooler piping for Subaru WRX and STI, BMW N54 and N55, Ford EcoBoost, Toyota Tacoma, GR Corolla, and other boosted platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 246 intercooler pipe kit SKUs across direct-fit vehicle systems, universal fabrication parts, couplers and clamps, turbo outlet connections, and front-mount intercooler routing. What This Intercooler Pipe Kit Collection Covers Direct-fit and fabrication-ready piping upgrades connect the turbocharger, intercooler, and intake tract with stronger materials and smoother airflow paths...
View Intercooler Pipe Kits Products


