Click to zoom in
SKU: B572001 | UPC: 799928867665
Cobb Mazdaspeed3 Gen2 Exhaust Hanger Kit 2010-2013 Mazda Mazdaspeed3
The Cobb Mazdaspeed3 Gen2 Exhaust Hanger Kit replaces the factory plastic exhaust hangers that crack and fail over time on 2010-2013 Mazda Mazdaspeed3 models. This kit keeps the exhaust system securely positioned to eliminate annoying rattles, vibrations, and ground contact during spirited driving. Crafted for direct replacement, it restores proper exhaust alignment with aftermarket or stock systems.
Key Features
- Billet 6061-T6 Aluminum Hangers: Precision CNC-machined for maximum strength and resistance to cracking under heat and stress.
- High-Density Polyurethane Bushings: Isolate vibrations and road noise while providing flexible support that outlasts rubber OEM parts.
- Stainless Steel Hardware Included: Corrosion-resistant bolts and nuts ensure long-term reliability in all weather conditions.
- Direct OEM Bolt-On Fit: Matches factory mounting points for plug-and-play installation without modifications or fabrication.
- Complete Kit for Both Rear Hangers: Includes two hangers, four bushings, and all necessary hardware for full replacement.
Product Notes
- Compatible with stock exhaust systems and most aftermarket cat-back setups on Mazdaspeed3 Gen2.
- Designed to handle high-performance driving without sagging or failure.
Installation Notes
- Professional installation recommended.
- Supports exhaust during install to avoid stress on muffler takes 15-30 minutes with basic tools.
- Uses existing factory mounting holes torque bolts to 20-25 ft-lbs.
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Mazda | Mazdaspeed3 | All |
Why Choose Cobb?
- Proven track record in Mazda performance parts since 1998.
- Manufactured in-house with strict quality controls for consistent fit and finish.
- Engineered specifically for Mazdaspeed3 to handle boosted power levels.
Frequently Asked Questions
-
Q: Will this fit my 2010-2013 Mazdaspeed3 with an aftermarket exhaust?
A: Yes, it bolts directly to OEM locations and works with most cat-back systems like Cobb, Injen, or Borla without adjustments. -
Q: What material are the hangers made from?
A: CNC-machined from durable 6061-T6 billet aluminum with polyurethane inserts for vibration damping and stainless steel fasteners. -
Q: Does Cobb offer a warranty on this kit?
A: Backed by Cobb's limited lifetime warranty against manufacturing defects when installed properly.
Shipping & Handling
- Method: UPS Ground or USPS Priority
- Availability: In stock - ships same or next business day
- Packaging: Compact box measuring 8" x 6" x 2"
- Weight: 0.45 lbs
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
COBB
COBB Tuning parts for turbocharged performance platforms are stocked at Black Ops Auto Works. Shop the Accessport ECU programmer, cold air intakes, cat back exhaust systems, and supporting hardware engineered for Subaru WRX and STI, Ford Focus ST and RS, Ford F-150 EcoBoost, Mazdaspeed3 and 6, Nissan GT-R, Porsche, BMW, and Volkswagen platforms. Every product is filterable by year, make, model, and trim so the correct part ships the first time. Black Ops Auto Works carries 372 COBB SKUs across tuning, intake, and exhaust categories. What This Brand Covers COBB Tuning built its reputation on the Accessport, one of the most widely used ECU flash tools in the aftermarket, and has expanded into intakes, exhausts, downpipes, and supporting hardware for a range of turbocharged platforms. The catalog centers on a defined group of import and Euro performance vehicles rather than a single brand family. Brand Focus COBB Tuning parts are engineered primarily for Subaru, Ford, Mazda, Nissan...
View COBB Products
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products