DeatschWerks 01-05 911 996 Turbo / 01-06 M3 E46 / 02-04 C32/SLK32 AMG 440cc Injectors

Find BMW 323i parts by 3 Series generation and installed six-cylinder engine. Earlier and later cars require different induction, exhaust and chassis applications. Separate Engine Generations The 323i name spans more than one engine and chassis generation. Use engine identification to select intake connections, ignition specifications and engine-service components. For an intake kit, compare air-meter fittings, heat shielding and mounting. Review the exact engine coverage rather than extending an E36 kit to an E46 or later car. Body and Chassis Choices Choose lamps and exhaust components for the actual body. An E92 coupe lamp is not a general 323i lighting application. Brake conversions and earlier lowering work can change what is required. Record the installed calipers, rotor dimensions, springs and dampers before planning replacements. Choose Your Part Identify generation, body and engine. Compare intake connections and mounting. Select lamps and exhaust by exact body. Record bra...

Shop BMW 325Ci parts for the E46 coupe or convertible. Compare six-cylinder intake applications, body-specific chassis components and the equipment required for brake service. Intake Kit or Service Filter Injen E46 325 applications distinguish production coverage and kit configurations. Compare the air-meter connection, intake routing, heat shielding and supplied mounting pieces. A replacement filter must match the installed housing. Record the intake brand and model if the original airbox has been replaced. Coupe and Convertible Requirements Choose springs and dampers for the correct body and axle loads. Convertible applications should be confirmed rather than inferred from a coupe listing. For exhaust work, compare body routing, tip position and the original sections retained. For brakes, use the installed rotor and caliper to identify pads, sensors and hardware. Choose Your Part Identify coupe or convertible and production period. Compare intake routing and meter connections. Ma...

Choose BMW 325i parts by chassis generation, engine and body. The model spans different six-cylinder installations and body styles, with separate requirements for induction, trim and chassis work. Generation and Body-Specific Purchases Use the actual chassis and engine for intake, ignition and service components. E30, E46 and later applications should not be combined into one engine-parts assumption. Window visors and lamps need exact body coverage. Compare attachment method, door count and mounting surfaces before choosing an exterior accessory. Suspension and Brake Planning Identify factory or aftermarket springs and dampers before replacing individual pieces. Compatible travel, mount condition and alignment matter alongside ride height. For brakes, match rotor dimensions and pad shape to the installed caliper. Check sensors, clips and other fitting hardware separately from the friction parts. Choose Your Part Identify chassis, engine and body. Match accessories to door and windo...

Choose BMW 328Ci parts for the E46 coupe and convertible. Focus on six-cylinder intake connections, engine accessory applications and body-specific suspension or exhaust requirements. Intake and Damper Applications Injen E46 328 intake selections have specific production and engine coverage. Compare the air-meter connection, inlet routing, filter position and supplied mounting pieces. For a crankshaft damper, establish exact engine-family coverage, pulley arrangement and installation procedure. Check any accompanying hardware requirements before scheduling the job. Body and Brake Configuration Coupe and convertible exhausts or suspension kits need their stated body coverage. Axle-load restrictions and existing lowering equipment affect the correct combination. Identify each axle’s caliper, rotor and pad shape before selecting brakes. Review sensors and hardware separately so the installation plan covers the full service. Choose Your Part Confirm E46 body and engine application. Com...

Shop BMW 330Ci parts for the E46 six-cylinder coupe or convertible. Plan engine-accessory and chassis work around the body and installed equipment. Engine Damper and Service Components Crankshaft damper applications identify the engine family and pulley arrangement. Compare the exact coverage and installation procedure, including required hardware, before scheduling replacement. For intake maintenance, identify the original airbox or installed aftermarket housing. Filter dimensions and connections should follow that assembly rather than a general E46 description. Body-Specific Chassis Requirements Springs and dampers need coupe or convertible coverage and appropriate axle-load limits. Compare compatible travel and mount condition alongside the desired ride height. Choose brake pads by caliper and rotor equipment, then compare compound use. Confirm the sensor connector and fitting hardware separately from the friction parts. Choose Your Part Identify E46 body and engine. Check dampe...

Shop BMW 330i parts by engine generation and body. Earlier six-cylinder cars and later turbocharged four-cylinder models need separate intake, exhaust and service applications. Exhaust Scope and Engine Coverage G2X AWE Touring selections include axle-back exhaust applications with specific production coverage. An axle-back changes the rear portion; compare retained pipework and the exact sections supplied. Check tip finish, bumper-outlet arrangement and mounting before deciding on appearance. An earlier 330i body or engine is a different exhaust application. Intake and Chassis Planning For induction components, compare engine identification, sensor connections and breather fittings. Record the housing if an aftermarket intake is already installed. Select springs and dampers by body, drivetrain and axle loads. Brake components need the installed rotor and caliper application before pad compound and sensor choices are made. Choose Your Part Identify engine, chassis and body. Compare ...

Choose BMW 330xi parts by all-wheel-drive generation, engine and body. Induction, suspension and exterior accessories each need their own application details. Engine and Induction Requirements Identify the actual six-cylinder engine and installed intake before choosing service filters or induction hardware. Compare sensor fittings, breather connections and mounting clearance. For a pedal controller, confirm the exact accelerator connector and supported vehicle application. Its response adjustment serves a different purpose from an intake or engine calibration. AWD Chassis and Body Accessories Use xi-specific spring and damper coverage, body and axle-load limits. An earlier or later all-wheel-drive generation should not be treated as the same chassis application. Window visors and trim depend on door and window layout. Brake pads, rotors and sensors should instead follow the installed caliper, axle and electrical connection. Choose Your Part Identify AWD generation, engine and body....

Find BMW M3 parts by generation, engine and body. Modern F8X and G8X intake or exhaust applications should be matched precisely before comparing sound, appearance and installation scope. Induction and Exhaust by Generation Match intake housings, turbo-inlet connections and sensor provisions to the exact engine. Shared M3/M4 coverage still needs the correct generation and installation details. Compare full exhaust systems with mid-pipes and conversion sections. Review resonation, valve operation, tips and the compatible starting exhaust for each configuration. Body and Brake Equipment Exterior components need the actual sedan, coupe, convertible or Touring application where relevant. Compare mounting and required original trim rather than transferring one body’s spoiler application. Brake pads and rotors follow the installed caliper, dimensions, material and axle. Confirm iron or carbon-ceramic equipment before selecting friction components or a conversion. Choose Your Part Identify...

Shop DeatschWerks fuel injectors, fuel pumps, pump modules, regulators, and fuel-system hardware at Black Ops Auto Works. Explore application-specific and universal components for selected domestic and import vehicles. Plan the complete system around your fuel type, operating pressure, engine configuration, and calibration requirements. DeatschWerks Fuel Injectors and Matched Sets The collection includes vehicle-specific injector sets and separately listed universal injectors. Selected applications cover Honda and Acura engines, Nissan and Infiniti platforms, Chevrolet trucks, and other listed vehicles. Match the injector body, installed height, upper and lower seals, connector, and electrical specifications. Compare flow ratings at their stated test pressure rather than treating every advertised cc/min or lb/hr figure as directly equivalent. A complete set and a single replacement injector are different packages. Confirm the cylinder count, quantity, fuel compatibility, and supplie...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Fuel injector connectors and pigtail harnesses for gasoline and diesel EFI systems are stocked at Black Ops Auto Works. Shop EV1, EV6, and EV14 connector pigtails, injector harness repair kits, Sumitomo connector housings, and diesel injector connector tubes from DeatschWerks, Bosch, and BLOX Racing for engine swaps, injector upgrades, and harness repair on Honda, GM, Ford, and Cummins and Powerstroke diesel platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 397 fuel injector connector SKUs across connector style, wire length, and vehicle application categories. What This Category Covers Fuel injector connectors are the electrical interface between the engine wiring harness and each individual injector solenoid, carrying the precision pulse-width-modulated signal from the ECU that controls injection timing and duration. Connector failure, corrosion, or poor terminal cont...

Fuel Injector Sets - 6Cyl parts and accessories are stocked at Black Ops Auto Works. Six cylinder fuel injector sets are matched for balanced fueling across every cylinder in turbocharged, naturally aspirated and OE replacement builds. Shop 550, 660, 1000, 1300, 1650, 2200 cc and higher flow injector sets for 2JZ, RB26, VR6, EcoBoost, GM 4.3L, BMW N54, Nissan VQ and other six cylinder platforms. Every product is filterable by year, make, model, trim, engine and drivetrain where applicable, so the correct part ships the first time. Black Ops Auto Works carries 65 Fuel Injector Sets - 6Cyl SKUs across the performance and replacement parts needed for a focused build. What This Fuel Injector Sets - 6Cyl Collection Covers This collection includes top feed and side feed injector sets, EV14 style injectors, high impedance options and application specific kits. A matched set helps tuners deliver repeatable air fuel ratios across all cylinders and provides the headroom needed for boost, ...

Fuel injectors and fuel injector sets for street cars, turbo and supercharged builds, and diesel trucks are stocked at Black Ops Auto Works. Shop performance fuel injectors, replacement EFI injectors, diesel injectors, injector adapters, injector connectors, and injector control modules from Injector Dynamics, DeatschWerks, Bosch, and BLOX Racing for Honda, Subaru, Mazda Miata, Toyota GR Corolla, LS platforms, and Ford Powerstroke, Dodge Cummins, and Chevrolet Duramax diesel trucks. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 399 fuel injector SKUs across flow rate, cylinder count, and connector style categories. What This Category Covers Fuel injectors control the precise amount of fuel delivered to each cylinder, and are one of the most fitment-sensitive parts in any EFI fuel system. This category spans direct replacement injectors for daily drivers through high-flow perfo...

Compare Mercedes-Benz C32 AMG brake components using the fitted W203 calipers, rotor package and intended driving use. Other AMG or shared pad references require their own exact application check. Front and Rear Friction Fit The displayed C32 AMG references identify 2002–2004 W203 front-pad applications. Confirm exact production and backing shape, then identify rear components independently. Match rotor material, dimensions and mounting to the chosen pads. A compound label does not identify every brake-package variation. Operating Use and Electronic Accessories Review manufacturer intended-use, preparation and bedding guidance before changing compound. Compare required sensors and hardware against exact contents. For a pedal-control accessory, confirm supported chassis, pedal connector and harness. A product for another Mercedes family should not be assumed compatible with the C32. Choose Your Part Identify W203 production and fitted brake equipment. Match front and rear pad applic...

Find Porsche 911 exhaust, cooling and carbon-fiber body parts by generation, engine and exact body specification. Keep Carrera, Turbo and GT-model applications separate. Cooling and Exhaust by Generation A 991.2 Turbo/Turbo S intercooler reference services a specific turbo-engine charge-air application. Confirm exact engine, mounting, connections and supplied supporting components. 997.2 crossover pipes and a 991 Carrera exhaust are separate systems. Review body, engine, valve behavior and stock-tip reuse requirements for the exact part number. Carbon-Fiber Body and Wind Accessories Match hood, duct, splitter and vent references to exact 991/991.2/992 and GT body equipment. A GT2 RS-style appearance does not establish every underlying model’s mounting compatibility. Separate 991/981/718 Foiler coverage from a 992 version. Review body mounting, finish, supporting hardware and installation preparation before ordering. Choose Your Part Identify generation, engine, trim and body specif...

Shop Porsche parts by exact model, generation and installed equipment. Use the model-specific collections to compare exhaust, cooling, brake and body-accessory requirements. Start with the Correct Porsche Model For generation-specific exhaust, cooling and carbon-body guidance, explore Porsche 911 parts. Keep Carrera, Turbo and GT applications separate within that selection. For mid-engine coupe applications, visit 718 Cayman parts. Exhaust engine coverage, brake material and body equipment remain part-specific checks. SUV and Electric Applications Compare engine-specific exhaust and brake-service choices in Macan parts. Combustion and electric Macan applications require separate selections. For body, cabin and brake guidance on the electric car, explore Taycan parts. Match exact body/trim and installed brake equipment rather than transferring another model’s application. Choose Your Part Choose exact model, generation and production. Confirm actual engine/powertrain and body. Recor...