Click to zoom in
Confident Brake Service for Lotus Elise and Lotus Exige
This DFC application-specific brake rotor is matched to Lotus Elise and Lotus Exige. Manufacturer part number 920-84000 identifies the exact application, while the fitment table below helps confirm vehicle and position before ordering. The DFC catalog identifies it as DFC Hi-Carbon Alloy GEOMET Coated Rotor - Drilled.
Key Features
- Vehicle-specific dimensions support direct replacement fitment
- Rotor geometry is engineered for consistent friction contact
- Correct installation and bedding support smooth, predictable braking
- Drilled friction surface supports heat and gas evacuation during demanding stops
- Coated surfaces provide added corrosion protection in exposed areas
- High-carbon rotor construction supports strength and vibration control
- Precision balancing is specified to support smooth braking and limit vibration
- DFC specifies tight disc thickness variation control for consistent pad contact
- The listed iron casting specification supports rotor strength and dimensional stability
Fitment
Match the complete year, make, model, submodel, and front or rear; verify the selected application before ordering. This is not a universal brake component.
| Year Range | Make | Model | Submodel | Position |
|---|---|---|---|---|
| 2005 to 2011 | Lotus | Elise | Base | Front or rear; verify the selected application |
| 2011 | Lotus | Elise | R | Front or rear; verify the selected application |
| 2008 to 2011 | Lotus | Elise | SC | Front or rear; verify the selected application |
| 2006 | Lotus | Exige | Base | Front or rear; verify the selected application |
| 2007 to 2009 | Lotus | Exige | S | Front or rear; verify the selected application |
| 2008 to 2011 | Lotus | Exige | S 240 | Front or rear; verify the selected application |
Specifications
| Brand | Dynamic Friction Company (DFC) |
|---|---|
| Manufacturer Part Number | 920-84000 |
| SKU | DFC920-84000 |
| Product Type | Brake Rotors - Drilled |
| Position | Front or rear; verify the selected application |
| UPC | 190920063169 |
| Outside Diameter | 288 mm |
| Nominal Thickness | 26 mm |
| Discard Thickness | 24 mm |
| Overall Height | 44.3 mm |
| Center Hole Diameter | 60 mm |
| Inside Diameter | 60 mm |
| Bolt Hole Quantity | 4 EA |
| Stud/Lug Hole Quantity | 4 |
| Stud/Lug Hole Circle Diameter | 100 mm |
| Surface Type | X Drilled |
| Solid Or Vented Type Rotor | Vented |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Disc Finish | Fully Coated GEOMET |
| Hat Finish | Fully Coated GEOMET |
What's Included
One DFC brake rotor identified by manufacturer part number 920-84000, supplied in the package configuration stated in the product title and specifications. Order quantity should match the number of vehicle positions being serviced.
About DFC
Dynamic Friction Company develops replacement and performance brake components for a wide range of passenger, performance, and commercial vehicle applications. DFC products are cataloged by exact vehicle application and manufacturer part number to support accurate brake service.
FAQ
Will this fit my vehicle?
Use the full fitment table and confirm the brake position. Matching only the make and model is not enough.
What part number should I match?
Match DFC manufacturer part number 920-84000 and SKU DFC920-84000.
Should related brake components be inspected?
Yes. Inspect the mating friction surface, hydraulic components, hoses or lines, and mounting hardware before installation.
Installation Instructions
Compare the new rotor with the removed part, clean the hub face, verify runout, and install with serviceable pads and hardware. Follow the vehicle service manual for torque values and complete the recommended pad bedding procedure. Professional installation is recommended.
Prop 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Brake Rotors
Brake rotors for street, track, tow, and off-road builds are stocked at Black Ops Auto Works. Shop drilled and slotted rotors, slotted-only rotors, dimpled rotors, blank OE-replacement rotors, two-piece floating rotors, high-carbon iron rotors, and vehicle-specific rotor packages for Hellcat, Trackhawk, TRX, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct rotor ships the first time. Black Ops Auto Works carries 2,884 brake rotor SKUs across drilled, slotted, two-piece, and OE-replacement categories. What This Collection Covers Brake rotor selection is one of the two friction decisions on the vehicle, the other being pad compound. This collection covers rotor styles, metallurgy, sizing, and vehicle-specific fitment for daily drivers, sport cars, track builds, tow rigs, and off-road platforms. Rotor Styles Drilled and slotted, slotted-only, dimpled, blank OE-replacement, and two-piece floa...
View Brake Rotors Products
Brake Rotors - Drilled
Cross-drilled brake rotors, drilled and slotted rotors and coated rotors for Mustang, Camaro, Silverado, F-150, WRX, Wrangler, Bronco, Audi, BMW, Porsche and other performance vehicles are stocked at Black Ops Auto Works. Shop front rotors, rear rotors, drilled brake discs, coated rotors, rotor pairs, direct-fit replacements and performance brake upgrades. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct rotor ships the first time. Black Ops Auto Works carries 151 drilled brake rotor SKUs across street performance, truck towing, track-inspired, European, Japanese and domestic brake applications. Cross-Drilled Brake Rotor Basics Heat, pad gases and direct-fit dimensions Cross-drilled rotors use drilled holes in the friction surface. They are offered as vehicle-specific replacements and performance upgrades for applications that need the right diameter, thickness, hat offset, bolt pattern and center bore. Choose rotors by exact fitment ...
View Brake Rotors - Drilled Products
Brakes
Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...
View Brakes Products