DFC DFC 05-18 Acura RDX Rear Brake Rotor
DFC DFC 05-18 Acura RDX Rear Brake Rotor
DFC DFC 05-18 Acura RDX Rear Brake Rotor
DFC DFC 05-18 Acura RDX Rear Brake Rotor
DFC DFC 05-18 Acura RDX Rear Brake Rotor
DFC DFC 05-18 Acura RDX Rear Brake Rotor
Click to zoom in

DFC 05-18 Acura RDX Rear Brake Rotor

DFC
DFC600-59048
190920036026
Brake Rotors - OE
18 Units In Stock
$ 27.17
$ 27.17

This DFC dfc brake rotor is matched to Acura RDX and Honda CR-V under manufacturer part number 600-59048. It is built around the application-specific dimensions, position, and brake-system requirements documented below so the replacement can be checked before installation.

Key Features

  • Rotor geometry is engineered for consistent friction contact.
  • OE-style rotor geometry supports correct fit and heat management.
  • The listed iron casting specification supports rotor strength and dimensional stability.
  • OE-style vane geometry supports heat dissipation during braking.

Fitment

Years Make Model
2007-2018 Acura RDX
2005-2016 Honda CR-V

Specifications

Manufacturer Dynamic Friction Company
Manufacturer Part Number 600-59048
Product Type Brake Rotors - OE
Position Rear
Outside Diameter 304.5 mm
Nominal Thickness 9 mm
Discard Thickness 7.5 mm
Overall Height 60.8 mm
Center Hole Diameter 64.1 mm
Inside Diameter 64.1 mm
Bolt Hole Quantity 5 EA
Stud/Lug Hole Quantity 5
Stud/Lug Hole Circle Diameter 114.3 mm
Surface Type Smooth
Solid Or Vented Type Rotor Solid
Disc Finish Plain

What's Included

One DFC brake component or matched service set in the exact quantity and configuration identified by manufacturer part number 600-59048. Additional components are included only when expressly listed for this MPN.

About Dynamic Friction Company

Dynamic Friction Company develops OE-style and performance brake components for vehicle-specific service. Correct selection depends on the exact part number, application, dimensions, and brake-system position.

Related DFC Brake Parts

Browse the DFC collection for additional brake-service components.

Frequently Asked Questions

How do I confirm this DFC part fits my vehicle?
Match the exact manufacturer part number and every year, make, model, axle-position, brake-system, and dimensional requirement shown on this page. VIN-level confirmation is recommended when production splits exist.

Should related brake components be inspected during installation?
Yes. Inspect the mating pads or shoes, rotors or drums, calipers, hoses, lines, hardware, fluid condition, and wheel bearings as applicable before returning the vehicle to service.

Does this brake component require a break-in or final safety check?
Complete every bleeding, adjustment, torque, leak-check, pedal-restoration, and bedding step required for this exact component and vehicle before normal driving.

Installation Instructions

  1. Confirm the exact vehicle, axle position, and rotor side before disassembly
  2. Compare the new rotor with the removed part and clean the hub face
  3. Measure hub and rotor runout, then install with serviceable pads and hardware
  4. Torque all fasteners to the vehicle service-manual values
  5. Bed the pads and rotors using the friction manufacturer's procedure
Acura RDX Parts and Accessories

Acura RDX Parts and Accessories

Shop Acura RDX parts by model year, engine, drivetrain and suspension equipment. The RDX has used three different engine configurations across its generations, so compare brake components, dampers and related service parts with the exact vehicle application in view. Package names alone do not establish compatibility. RDX Engine Changes Across Three Generations Separate U.S. 2007–2012, 2013–2018 and 2019-onward RDX applications. The original RDX uses a turbocharged 2.3-liter four-cylinder; the second generation switches to a naturally aspirated 3.5-liter V6; the third generation returns to a turbocharged four-cylinder, this time a 2.0-liter paired with a ten-speed automatic. Confirm front-wheel drive or the applicable all-wheel-drive configuration for the year. Record the exact package and installed suspension equipment, including electronic damping where fitted. An A-Spec or Advance badge does not replace the manufacturer's engine, drivetrain and equipment checks. RDX Dampers and El...

View Acura RDX Parts and Accessories Products
Brake Rotors

Brake Rotors

Brake rotors for street, track, tow, and off-road builds are stocked at Black Ops Auto Works. Shop drilled and slotted rotors, slotted-only rotors, dimpled rotors, blank OE-replacement rotors, two-piece floating rotors, high-carbon iron rotors, and vehicle-specific rotor packages for Hellcat, Trackhawk, TRX, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct rotor ships the first time. Black Ops Auto Works carries 2,884 brake rotor SKUs across drilled, slotted, two-piece, and OE-replacement categories. What This Collection Covers Brake rotor selection is one of the two friction decisions on the vehicle, the other being pad compound. This collection covers rotor styles, metallurgy, sizing, and vehicle-specific fitment for daily drivers, sport cars, track builds, tow rigs, and off-road platforms. Rotor Styles Drilled and slotted, slotted-only, dimpled, blank OE-replacement, and two-piece floa...

View Brake Rotors Products
Brake Rotors -OE

Brake Rotors -OE

OE brake rotors for daily drivers, luxury vehicles, trucks, and SUVs are stocked at Black Ops Auto Works. Shop OE-equivalent rotors, UV coated rotors, blank factory replacement rotors, front rotors, rear rotors, and vehicle-specific rotor sets built to match the original factory diameter, thickness, hat height, and metallurgy for a wide range of domestic, import, and luxury platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct rotor ships the first time. Black Ops Auto Works carries 889 OE brake rotor SKUs across coated, blank, and vehicle-specific replacement categories. What This Collection Covers OE brake rotors are the correct choice when the goal is to restore factory stopping performance and quiet operation after the original rotors wear past minimum thickness or develop hot spot discoloration. Unlike drilled and slotted upgrades built for aggressive street or track use, OE rotors prioritize a smooth friction surface, l...

View Brake Rotors -OE Products
Brakes

Brakes

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

View Brakes Products
DFC Brake Parts

DFC Brake Parts

Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...

View DFC Brake Parts Products
Honda CR-V Parts and Accessories

Honda CR-V Parts and Accessories

Find Honda CR-V floor protection, hood protectors and window deflectors by exact body and production. Match each accessory to its own floor or exterior profile. Front, Rear and Cargo Coverage Identify actual seats, console and floor configuration before selecting liners. Compare distinct production applications, including later-body front and second-row packages. Check front, second-row and cargo coverage separately. A combination floor package does not supply every cargo-area piece unless expressly stated. Hood and Window Applications Compare listed 2007–2009, 2012–2016 and 2017–2022 hood applications with the exact selected part and vehicle profile. Match finish after body coverage is established. For deflectors, review actual windows, mounting style and supplied piece count. A six-piece package and a different window set can cover different areas; compare exact application rather than quantity alone. Choose Your Part Record exact body and production year. Identify seats, console...

View Honda CR-V Parts and Accessories Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×