DFC 16-23 Mercedes-Benz GLC43 AMG Front Drilled GeoSPEC Coated Rotor

Brake rotors for street, track, tow, and off-road builds are stocked at Black Ops Auto Works. Shop drilled and slotted rotors, slotted-only rotors, dimpled rotors, blank OE-replacement rotors, two-piece floating rotors, high-carbon iron rotors, and vehicle-specific rotor packages for Hellcat, Trackhawk, TRX, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct rotor ships the first time. Black Ops Auto Works carries 2,884 brake rotor SKUs across drilled, slotted, two-piece, and OE-replacement categories. What This Collection Covers Brake rotor selection is one of the two friction decisions on the vehicle, the other being pad compound. This collection covers rotor styles, metallurgy, sizing, and vehicle-specific fitment for daily drivers, sport cars, track builds, tow rigs, and off-road platforms. Rotor Styles Drilled and slotted, slotted-only, dimpled, blank OE-replacement, and two-piece floa...

Cross-drilled brake rotors, drilled and slotted rotors and coated rotors for Mustang, Camaro, Silverado, F-150, WRX, Wrangler, Bronco, Audi, BMW, Porsche and other performance vehicles are stocked at Black Ops Auto Works. Shop front rotors, rear rotors, drilled brake discs, coated rotors, rotor pairs, direct-fit replacements and performance brake upgrades. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct rotor ships the first time. Black Ops Auto Works carries 151 drilled brake rotor SKUs across street performance, truck towing, track-inspired, European, Japanese and domestic brake applications. Cross-Drilled Brake Rotor Basics Heat, pad gases and direct-fit dimensions Cross-drilled rotors use drilled holes in the friction surface. They are offered as vehicle-specific replacements and performance upgrades for applications that need the right diameter, thickness, hat offset, bolt pattern and center bore. Choose rotors by exact fitment ...

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...

Compare Mercedes-Benz C43 AMG exhaust and brake options using exact generation, body and engine. A W205 exhaust application does not establish support for every C43 configuration. Exhaust and Valve-Accessory Contents AWE identifies W205 C43 applications within its C400/C450/C43 exhaust suite. Match exact system number, body and existing exhaust equipment. The displayed electronic valve-simulator package states two units. Confirm that the exact simulators are required and supported for the chosen system rather than treating them as exhaust valves or mufflers. Brake Equipment and Service Interfaces Match rotor diameter, thickness, offset and mounting to the fitted calipers. Compare pad backing shape, axle coverage and any AMG Sport equipment notes. Sensor wires and installation hardware need their own connection and contents checks. Choose friction material for intended use after exact fit is established. Choose Your Part Identify generation, body and engine. Confirm W205 exhaust sys...

Choose Mercedes-Benz C450 AMG exhaust and brake components using exact W205 body and installed equipment. Match complete system connections and axle-specific friction applications separately. Touring Exhaust Installation AWE lists C450 within its W205 C400/C450/C43 suite. Confirm exact Touring Edition part number, body support and connection points. Compare supplied pipes, clamps and mounting hardware with retained factory components. Review existing exhaust changes and outlet arrangement before planning installation. Pads, Rotors and Wear Leads Match rear pad backing shape and caliper application, then identify front equipment independently. Review exact pad-and-hardware contents. For rotors, compare diameter, thickness, offset and mounting. Wear leads require correct connector, length and routing; a shared model family does not establish every service component. Choose Your Part Identify exact W205 body and configuration. Confirm exhaust connections and complete contents. Match f...

Compare Mercedes-Benz CLS450 brake, lubricant and wheel-spacing components using exact chassis and installed equipment. Shared CLS or E-Class references require part-specific support. Brake Package Identification Match calipers, pad backing shape, rotor material and axle position before selecting friction components. Compare diameter, thickness, offset and mounting for each rotor. Review hardware, sensors and intended compound use separately. Another CLS variant’s rear-pad reference does not establish every CLS450 configuration. Fluids and Wheel Interfaces Choose ATF by the exact transmission’s required specification and service quantity. Engine oil requires the correct approval and viscosity for the installed engine. For spacers, compare pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using current wheel width, offset and tire size. Choose Your Part Identify chassis and actual brake package. Match full pad and rotor geometry. Confirm engine and gearbo...

Choose Mercedes-Benz E300 brake-service parts using the exact chassis and brake equipment. Separate rotor geometry, friction use and installation hardware before comparing complete kits. Rotor and Caliper Identification Record the installed front and rear calipers and rotor dimensions. Another E-Class or GLC rotor reference does not establish E300 compatibility without exact manufacturer support. Compare mounting, thickness, overall height and any equipment exclusions. Determine pad backing shape from the installed caliper rather than from compound name. Friction Kits and Supporting Parts For EBC S5 Yellowstuff/GD references, check exact application, axle and supplied contents. Review intended use, rotor preparation and bedding instructions. Match wear-lead connectors and routing, rear hardware and protective boots independently. A boot package should not be treated as a complete damper assembly. Choose Your Part Identify chassis, production and installed brakes. Compare rotor geom...

Choose Mercedes-Benz E350 rear brake kits by exact generation, installed calipers and intended use. Compare kit contents before adding separate sensors, rotors or hardware. Rear Brake Kit Selection Visible EBC S1, S12 and S13 references require exact axle and vehicle confirmation. Compare the specified compound, compatible rotor and manufacturer use guidance for each proposed kit. A shared E/CLS reference does not establish every E350 brake package. Identify backing shape, rotor material and dimensions from the installed assembly. Complete Service Requirements Check whether a kit includes pads, rotors, sensors and installation hardware. Match sensor connectors, routing and service position rather than relying on length alone. For front rotors, protective boots or electronic pedal accessories, verify their applications independently. A rear-brake match does not establish those separate interfaces. Choose Your Part Identify generation and rear caliper package. Compare exact kit compo...

Compare Mercedes-Benz E400 rear brake friction and rotor kits using exact production and brake equipment. Choose the operating characteristics only after physical application is established. Rear Pad Application and Use A visible Hawk HPS 5.0 reference names a 2018 E400 rear application. Confirm exact caliper and pad specification before extending that reference to another model year or configuration. Compare intended driving use, compatible rotor material and preparation instructions. Another AMG or E-Class application is not a substitute for exact E400 support. Kits, Sensors and Separate Interfaces For EBC S1, S12 and S13 references, review exact axle, friction specification and rotor contents. Match rotor dimensions and mounting independently. Identify wear leads and hardware separately. Pedal-control accessories require their own supported chassis, connector and harness even when a brake application has been confirmed. Choose Your Part Identify production and fitted rear calipe...

Compare Mercedes-Benz E43 AMG rear pads by compound, caliper application and rotor material. The visible Hawk references identify 2017–2018 4MATIC 3.0L applications, with separate HPS 5.0 and Performance Ceramic choices. Rear Friction and Rotor Compatibility Confirm the proposed Hawk part number against the fitted rear caliper. Hawk specifies iron/metal rotors for its pads and excludes carbon-ceramic rotors. Choose between supported friction options by driving use and manufacturer guidance. A ceramic pad compound is different from a carbon-ceramic rotor system. Front Brakes and Service Fluids Match front rotors separately by diameter, thickness, height and mounting. Check required clips, wear leads and other hardware against complete kit contents. For transmission fluid, identify the exact gearbox and required Mercedes-Benz specification. Filter applications also require exact engine and housing support; a shared 3.0L description is insufficient. Choose Your Part Identify exact E43...

Compare Mercedes-Benz E450 front rotors, rear friction and service fluids by exact body, production and installed equipment. A match at one axle does not identify a complete brake package. Front Rotor and Rear Pad Selection A visible DFC E450 front drilled-rotor reference spans 2016–2023. Confirm exact part-number coverage and compare rotor diameter, thickness, height and mounting. For rear pads, use manufacturer-confirmed E450 coverage rather than assuming a CLS53 reference applies. Hawk’s HB911Z.654 application includes specific E450 configurations; confirm the proposed product independently. Rotor Material and Fluid Specifications Hawk pads require iron/metal rotors and are not compatible with carbon-ceramic rotors. Review the selected compound, compatible rotor and bedding instructions. Identify the exact gearbox-fluid approval and engine-oil approval/viscosity separately. A shared viscosity or oil brand is insufficient; filter housing and engine coverage also need their own mat...

Compare Mercedes-Benz E53 AMG brake components by generation and actual brake package. Front and rear applications, rotor material and friction use need separate confirmation. Rear Pad Shape and Rotor Material Hawk’s HB911Z.654 application includes specific E53 configurations. Match exact year, caliper and proposed part number instead of transferring every E43 or CLS53 reference. Hawk specifies iron/metal rotors and excludes carbon-ceramic systems. Compare supported compound characteristics and manufacturer preparation instructions after confirming physical application. Front Rotors, Sensors and Hardware Match front rotor diameter, thickness, overall height and mounting independently. An AMG Sport Package reference for another model does not identify E53 brake geometry. Compare wear-lead connectors, routing and exact position. Review clips, fasteners and other required service pieces against complete kit contents. Choose Your Part Identify exact E53 generation and installed brake p...

Compare Mercedes-Benz GLC300 rotors and friction parts by generation, body and installed brake package. A sport-equipment reference needs more detail than the model badge alone. Front Rotor Dimensions The DFC front drilled hi-carbon Geomet rotor application identifies 2016–2023 GLC300. Confirm exact part-number coverage for your production and installed brakes. Compare diameter, thickness, overall height and mounting. Select front pads by caliper and backing shape rather than rotor finish. Rear Package and Wear Leads Match rear calipers and rotor geometry independently. C-Class AMG Sport or GLC43 references require explicit support for the actual GLC300 brake equipment. Compare wear-lead connectors, routing, length and position. Review clips and hardware, then follow the manufacturer’s preparation and bedding instructions. Choose Your Part Identify generation, body and brake equipment. Match front rotor geometry and caliper application. Confirm rear package independently. Review se...

Choose Mercedes-Benz GLC350e brake components for the exact plug-in hybrid generation and installed equipment. A standard GLC300 or AMG application is not automatic hybrid coverage. Hybrid-Specific Brake Application Identify production, body and full hybrid variant before selecting friction parts. Match front and rear calipers, pad backing shape and rotor material independently. Compare proposed GLC-family rotors by exact manufacturer coverage, diameter, thickness, height and mounting. Include changed assemblies or relevant factory equipment. Sensors and Complete Service Contents Match wear-lead connector, length, routing and required service position. Review clips and hardware separately from pad and rotor contents. Follow the vehicle and component manufacturer’s service instructions for the confirmed hybrid brake system. Review compatible compound use and bedding requirements before installation. Choose Your Part Identify exact plug-in hybrid generation. Record installed front an...

Compare Mercedes-Benz GLC43 AMG front and rear rotors by generation and installed brake equipment. Match each axle before choosing a friction compound or coating. Axle-Specific Rotor Matching DFC references identify 2016–2023 GLC43 AMG front drilled GeoSPEC and rear hi-carbon Geomet rotors. Confirm exact manufacturer numbers and production coverage. Compare diameter, thickness, overall height, mounting and material independently at each axle. Another E-Class or GLC300 rotor needs exact GLC43 support. Friction, Sensors and Hardware Match pad backing shape to the fitted caliper, then compare supported compound and intended use. Review compatible rotor material and bedding instructions. Match wear-lead connectors, routing and position. Confirm clips and other installation pieces against full kit contents. Choose Your Part Identify generation and current brake package. Match front and rear rotor numbers separately. Compare backing shape, rotor material and compound use. Review sensor i...