Click to zoom in
Restore Hydraulic Integrity with the Correct Brake Hose
A position-specific brake hose must route cleanly, seal correctly, and tolerate full suspension and steering movement. DFC 350-71001 is built for the verified dimensional application shown below. Key details are DFC hydraulic brake hose for exact vintage International and Dodge front/rear applications and position: front or rear only as specified by the exact row.
Key Features
- DFC 350-71001: DFC hydraulic brake hose for exact vintage International and Dodge front/rear applications.
- Position: front or rear only as specified by the exact row
- Side/package: single hose; quantity varies by row
- Construction: stainless-steel/rubber hydraulic hose with EPDM outer sleeve
- Standards: DOT compliant; SAE J1401
- Fitting 1: female inverted flare 5/8-18
- Fitting 2: male inverted flare 7/16-20
- Brackets: 0
- Gasket Included: no
- Grommet Included: no
- Shield Included: no
- Package Weight Lb: 0.4
- Includes one hydraulic brake hose
Fitment
Use DFC 350-71001 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| Configuration-specific | Verified applications | Brake Hoses | Front, quantity two: 1974-1975 International 150 Base except FA48; 1971-1973 International 1110 2WD; 1971 International 1210 2WD; 1969-1970 International 1100D/1200D and 1300D 2WD; 1969 Dodge M375; 1968 International 1300C 2WD; 1967 International 1300B 2WD; 1966 International 1100A/1200A 2WD; 1965 International D1100; 1961-1962 International AM80; 1956 International S130/S132. Rear: 1958 and 1961 International AM80 with 30/127RA notes; 1956 International SM120/SM122/SM130/SM132 with listed 15x5 brake qualifiers; selected 1955 International R-series rows with chassis, bus, and 173/183 qualifiers.; Front or rear position only as identified by the exact source row; Preserve 2WD, FA48, chassis-number, axle, bus, 15x5 brake and 173/183 qualifiers; Quantity varies by application row; Excludes: Preserve 2WD, FA48, chassis-number, axle, bus, 15x5 brake, and 173/183 qualifiers. Do not map the hose to every International model in the year range. |
Specifications
| Detail | Value |
|---|---|
| Brand | DFC |
| Manufacturer Part Number | 350-71001 |
| Product Type | Brake Hoses |
| manufacturer | Dynamic Friction Company |
| mpn | the listed part number |
| product_type | Brake Hoses |
| construction | stainless-steel/rubber hydraulic hose with EPDM outer sleeve |
| standards | DOT compliant; SAE J1401 |
| fitting_1 | female inverted flare 5/8-18 |
| fitting_2 | male inverted flare 7/16-20 |
| package_weight_lb | 0.4 |
What's Included
- one hydraulic brake hose for DFC 350-71001
About DFC
Dynamic Friction Company manufactures application-specific brake components, including pads, rotors, hoses, hardware, drums, and hydraulic parts for passenger and commercial vehicles.
Related Parts
- Check application-matched pads, rotors, hardware, hoses, fluid, and opposite-side service parts separately before beginning the brake job.
FAQ
What is the 350-71001?It is a DFC brake hoses for the verified dimensional application shown below, built around DFC hydraulic brake hose for exact vintage International and Dodge front/rear applications.
What is the main benefit of this part?DFC hydraulic brake hose for exact vintage International and Dodge front/rear applications; Position: front or rear only as specified by the exact row.
Which applications does it fit?It is intended for the verified dimensional application shown below. Use the Fitment table and every listed qualifier before ordering.
What comes with this product?one hydraulic brake hose.
What construction details should I know?Brake Hoses; stainless-steel/rubber hydraulic hose with EPDM outer sleeve.
What should be checked before installation?Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.
How should this part be installed?Match the exact front/rear row and fitting routing, avoid twists and contact through full steering/suspension travel, then bleed the brake system and leak-test. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.
What warranty applies?DFC 12-month/12,000-mile limited warranty.
Installation Instructions
- Match the exact front/rear row and fitting routing, avoid twists and contact through full steering/suspension travel, then bleed the brake system and leak-test.
- Confirm the exact part number, application, included components, and all required tools before disassembly.
- Inspect mounting points, mating parts, clearances, wiring, fluids, and fasteners before installation.
- Install according to the current manufacturer instructions and all specified torque, alignment, or calibration procedures.
California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm.
DFC Brake Parts
Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...
View DFC Brake Parts Products