Click to zoom in
Restore Drum-Brake Hydraulic Action at the Correct Side
A correctly sized wheel cylinder helps return balanced hydraulic force and dependable shoe movement. DFC 375-47044 is built for 1962-1963 Chevrolet Chevy II applications shown in the Fitment table. Key details are direct-fit rear-left drum-brake wheel cylinder and position: rear.
Key Features
- DFC 375-47044: Direct-fit rear-left drum-brake wheel cylinder.
- Position: rear
- Side/package: left/driver
- Component: drum-brake wheel cylinder
- Construction: direct-fit, pressure-tested hydraulic replacement
- Package Dimensions In: 4 x 2 x 2.5
- Shipping Weight Lb: 0.95
- Quantity: 1
- Includes one rear-left wheel cylinder
Fitment
Use DFC 375-47044 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 1962-1963 | Chevrolet | Chevy II | Rear left/driver side; Excludes: Do not substitute the right-side cylinder |
Specifications
| Detail | Value |
|---|---|
| Brand | DFC |
| Manufacturer Part Number | 375-47044 |
| Product Type | Brake Wheel Cylinders |
| manufacturer | Dynamic Friction Company |
| mpn | the listed part number |
| product_type | Brake Wheel Cylinders |
| component | drum-brake wheel cylinder |
| construction | direct-fit, pressure-tested hydraulic replacement |
| package_dimensions_in | 4 x 2 x 2.5 |
| shipping_weight_lb | 0.95 |
| quantity | 1 |
What's Included
- one rear-left wheel cylinder for DFC 375-47044
About DFC
Dynamic Friction Company manufactures application-specific brake components, including pads, rotors, hoses, hardware, drums, and hydraulic parts for passenger and commercial vehicles.
Related Parts
- Check application-matched pads, rotors, hardware, hoses, fluid, and opposite-side service parts separately before beginning the brake job.
FAQ
What is the 375-47044?It is a DFC brake wheel cylinders for 1962-1963 Chevrolet Chevy II applications shown in the Fitment table, built around Direct-fit rear-left drum-brake wheel cylinder.
What is the main benefit of this part?Direct-fit rear-left drum-brake wheel cylinder; Position: rear.
Which applications does it fit?It is intended for 1962-1963 Chevrolet Chevy II applications shown in the Fitment table. Use the Fitment table and every listed qualifier before ordering.
What comes with this product?one rear-left wheel cylinder.
What construction details should I know?Brake Wheel Cylinders; direct-fit, pressure-tested hydraulic replacement.
What should be checked before installation?Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.
How should this part be installed?Install at the rear-left drum brake, inspect shoes and hardware for fluid contamination, then bleed the hydraulic system and verify no leaks. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.
What warranty applies?DFC 12-month/12,000-mile limited warranty.
Installation Instructions
- Install at the rear-left drum brake, inspect shoes and hardware for fluid contamination, then bleed the hydraulic system and verify no leaks.
- Confirm the exact part number, application, included components, and all required tools before disassembly.
- Inspect mounting points, mating parts, clearances, wiring, fluids, and fasteners before installation.
- Install according to the current manufacturer instructions and all specified torque, alignment, or calibration procedures.
Chevrolet Chevy II Parts and Accessories
Find Chevrolet Chevy II parts around the actual chassis and brake assemblies. Restoration and modified-car purchases benefit from recorded spindle, axle and wheel details before selecting conversion hardware. Brake Conversion Applications A kit listed for another GM platform needs explicit Chevy II coverage. Compare spindle attachment, hub requirements and the manufacturer’s complete application rather than relying on a shared engine or production era. Rear brakes need the installed axle and housing-end configuration. Keep donor or conversion references when the car’s original axle has been replaced. Wheels and Hydraulic Equipment Use the brake manufacturer’s template with the intended wheel design and offset. Match hydraulic requirements to the complete conversion, including master-cylinder and pedal-system guidance. For service cylinders or calipers, record casting or part references, mounting and hydraulic connections. Position and bleeder orientation should follow the specified ...
View Chevrolet Chevy II Parts and Accessories Products
DFC Brake Parts
Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...
View DFC Brake Parts Products