DFC Active Performance Rear Brake Pads and Hardware Kit for Scion FR-S, Subaru BRZ, Toyota 86 and GR86

Responsive Rear Braking for 1115-1124-01 Applications

DFC Active Performance rear brake pads with mounting hardware deliver controlled pedal response and dependable friction for the listed Scion, Subaru, and Toyota applications. Low metallic friction material supports initial bite, modulation, and fade resistance during demanding street use. Match the exact 1115-1124-01 before ordering.

Key Features

• Low metallic friction material for responsive rear braking
• High friction stability supports predictable modulation and release
• Low compressibility supports a firm pedal feel
• High fade resistance supports consistent response at elevated temperature
• Integrally molded friction material attachment
• Mechanical wear sensor preparation without a wear sensor included
• Mounting hardware included for the pad installation
• Rear axle design for the applications listed below
• Exact application identifier 1115-1124-01 for replacement matching

Fitment

Verify the vehicle year, make, model, submodel, and rear position before ordering. This is a vehicle specific brake pad set rather than a universal application. Confirm 1115-1124-01 against the original service information and the replacement order.

Specifications

What's Included

• Four DFC Active Performance rear brake pads
• Mounting hardware for the pad set

About DFC

DFC Active Performance brake components are engineered to support consistent friction and pedal control for street and performance applications. This set pairs low metallic friction material with an integrally molded attachment for the listed rear brake applications.

FAQ

It identifies this DFC Active Performance rear brake pad and hardware set for the applications in the fitment table.

It fits select Subaru BRZ, B9 Tribeca, Tribeca, Forester, Legacy, Outback, and WRX applications, plus Scion FR-S, Toyota 86, and Toyota GR86 applications listed above.

This set is for the rear axle only. Confirm the position before ordering.

The pads use low metallic friction material with high friction stability and low compressibility.

No wear sensor is included. The pads are prepared for a mechanical sensor where the vehicle system requires one.

The package contains four rear brake pads and the included mounting hardware.

Compare the listed pad height, width, and overall thickness with the removed pads and vehicle service information before purchase.

No. They are specified for the rear axle and should not be substituted for a front axle pad set.

No. Fitment is limited to the year and submodel combinations shown in the table. Verify the exact vehicle configuration before ordering.

Brake service should be performed by a qualified technician using the vehicle service procedure and proper safety equipment.

Warranty coverage depends on the applicable DFC and seller terms. Review the current warranty terms before purchase and retain the order record.

Installation Instructions

1. Confirm the rear application, pad dimensions, and the vehicle service procedure before disassembly.
2. Park on a stable level surface, secure the vehicle, and support it with approved stands.
3. Remove the rear wheel and inspect the caliper, rotor, hardware, and brake hose for damage or abnormal wear.
4. Remove the caliper retaining hardware and support the caliper so the brake hose is not strained.
5. Remove the old pads and hardware, then clean the contact areas without contaminating the friction surfaces.
6. Install the supplied mounting hardware and the new pads in the correct inner and outer positions.
7. Reinstall the caliper, tighten all fasteners to the vehicle service specification, and confirm unobstructed movement.
8. Reinstall the wheel, operate the pedal until firm, check the fluid level, and perform the required bedding procedure in a safe area.

Prop 65 Warning

WARNING: This product can expose you to chemicals including antimony oxide, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.