DFC Heavy Duty front and rear brake pads for Blue Bird TC1000
Click to zoom in

DFC Heavy Duty Front and Rear Brake Pads and Hardware Kit for Blue Bird TC1000

DFC
DFC1214-0769-01
190920071324
Brake Pads - OE
10 Units In Stock - Ships Next Business Day
$ 88.21
$ 88.21

Heavy Duty Braking for Blue Bird TC1000

The DFC 1214-0769-01 pad set is built to deliver dependable stopping response for the Blue Bird TC1000 front and rear air disc brake application.

Restore consistent stopping response on a Blue Bird TC1000 with a front and rear air disc brake pad set built for demanding service. The DFC Heavy Duty pad kit combines semi metallic friction material with included mounting hardware for high operating temperatures, frequent stops, towing, steep grades, and off road use. The exact product identifier for this application is 1214-0769-01.

Key Features

  • DFC Heavy Duty front and rear brake pad set, manufacturer part number 1214-0769-01
  • Semi metallic friction material with strong, predictable friction across temperature, speed, and axle load changes
  • Designed for high operating temperatures and extreme braking environments
  • Rotor friendly formulation with low dust and low noise operation
  • Rubber, steel, rubber shims and an underlayer support noise control and thermal management
  • 100 percent post cured construction and copper free formulation
  • Mounting hardware is included for the listed application

Fitment

Make Model Position Brake System
Blue Bird TC1000 Front and rear Air disc brakes

Confirm the vehicle application and brake system before ordering. This listing is for the Blue Bird TC1000 application shown above.

Specifications

Detail Value
Manufacturer part number 1214-0769-01
Product type Disc brake pad set with hardware
Brake position Front and rear
Brake system Air disc brakes
Friction material Semi metallic
Pad quantity 4
Outer width 240 mm
Inner width 240 mm
Outer height 88.4 mm
Inner height 88.4 mm
Outer overall thickness 25.2 mm
Inner overall thickness 25.2 mm
Friction material attachment Integrally molded
Mounting hardware Included
Pad wear sensor preparation Not prepared
Weight 15.3 lb

What's Included

  • Four semi metallic disc brake pads
  • One mounting hardware kit

About DFC

DFC develops brake components for passenger, commercial, and heavy duty vehicle applications. Its Heavy Duty brake pads are engineered for frequent braking, towing, high speed, steep grades, and other conditions that place greater heat and load demands on the brake system.

FAQ

What is the 1214-0769-01?

It is a DFC Heavy Duty disc brake pad set with mounting hardware for the Blue Bird TC1000 air disc brake application listed above.

Which vehicle does this pad set fit?

This listing is for the Blue Bird TC1000. Verify the vehicle application and air disc brake configuration before purchase.

Which axle positions are covered?

The set is specified for front and rear positions.

What type of brake system is required?

The application requires air disc brakes. It is not identified for drum brakes.

What friction material is used?

The pads use semi metallic friction material designed to provide predictable response across temperature, speed, and axle load changes.

Are mounting parts included?

Yes. The package includes a mounting hardware kit along with four brake pads.

Are wear sensors included?

The product specification states that the pads are not prepared for a pad wear sensor.

How much does the pad set weigh?

The published set weight is 15.3 lb.

What warranty coverage applies?

DFC warranty coverage is stated as 12 months or 12,000 miles, subject to the manufacturer's warranty terms.

What should I check before ordering?

Match the Blue Bird TC1000 application, front and rear position, and air disc brake system to the vehicle before purchase.

Installation Instructions

  1. Confirm that the package label shows 1214-0769-01 and that the vehicle matches the Blue Bird TC1000 air disc application.
  2. Park the vehicle on a level surface, secure it against movement, and follow the vehicle service manual for lifting and support.
  3. Remove the wheel and brake hardware according to the service manual, keeping the original fasteners organized.
  4. Inspect the rotor, caliper, caliper carrier, pins, seals, and hoses. Correct any damaged or worn parts before installing pads.
  5. Clean the pad contact areas and verify that the included hardware matches the removed hardware before assembly.
  6. Install the pads and mounting hardware in the correct front or rear position. Do not force parts that do not seat correctly.
  7. Reassemble the brake components and tighten all fasteners to the vehicle manufacturer's specified torque.
  8. Before moving the vehicle, press the brake pedal several times until firm. Check fluid level and inspect for leaks.
  9. Perform the bedding procedure required by the vehicle or brake manufacturer. Avoid severe braking until the pads are properly bedded.

California Proposition 65 Warning: This product can expose you to antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm.

Prop 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Request For Information

Have questions about DFC Heavy Duty Front and Rear Brake Pads and Hardware Kit for Blue Bird TC1000? Fill out the form below and we'll get back to you by the next business day.
Brake Pads

Brake Pads

Brake pads and brake shoes for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop ceramic pads, semi-metallic pads, full metallic and racing compounds, low-dust street pads, big brake kit pads, OE-replacement pads, and drum brake shoes for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, and import platforms. Every pad set is filterable by year, make, model, trim, and caliper type (OE floating caliper, Brembo fixed caliper, big brake kit caliper) so the correct compound and shape ships the first time. Black Ops Auto Works carries 4,351 brake pad and brake shoe SKUs across street, sport, and track compounds. What This Category Covers Brake pads are the most frequently replaced brake component and the single highest-value brake upgrade for most drivers. Swapping stock pads for a quality ceramic or semi-metallic compound produces an immediate improvement in stopping distance, pedal feel, and fade resistance wit...

View Brake Pads Products
Brake Pads - OE

Brake Pads - OE

OE brake pads for daily drivers, luxury vehicles, trucks, and SUVs are stocked at Black Ops Auto Works. Shop OE-equivalent ceramic pads, NAO pads, low-metallic pads, severe-duty semi-metallic pads, and vehicle-specific OE-replacement sets from Brembo OE, PowerStop, Timbren, Akebono, Wagner, Bosch, Raybestos, Centric, StopTech, EBC Ultimax, Hawk LTS, and ATE. Every product is filterable by year, make, model, trim, and factory brake package so the correct pad ships the first time. Black Ops Auto Works carries 760 OE brake pad SKUs across ceramic, NAO, low-metallic, and severe-duty compounds. What This Collection Covers OE brake pads are engineered to match the friction level, noise characteristics, dust output, and rotor friendliness of the factory pad the vehicle shipped with. Choose OE pads to restore factory braking behavior for daily driving, road trips, and light towing. Compound Types OE-equivalent ceramic, NAO (non-asbestos organic), low-metallic, and severe-duty semi-metal...

View Brake Pads - OE Products
Brakes

Brakes

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

View Brakes Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×