Dinan B48/B58/S58 Iridium Spark Plug - Heat Range 9 - 12mm x 26.5mm x 14mm (Flat) - SINGLE

Find BMW 228i Gran Coupe parts for the four-door model’s exact chassis, engine and brake equipment. Keep Gran Coupe applications distinct from the two-door 228i Coupe. Four-Door Platform Identification Record generation, market, engine code and drivetrain. BMW’s Gran Coupe uses a different platform arrangement from the rear-wheel-drive-based two-door Coupe, so shared 228i naming is not enough to choose engine or chassis hardware. Use complete Gran Coupe coverage for body accessories and mounting components. For all-wheel-drive applications, compare the 228i xDrive Gran Coupe guidance. Brake Pads, Rotors and Sensors Identify the installed caliper and brake option before selecting pads. Match pad shape, rotor diameter, thickness, material and axle, then choose a compound for the car’s use. Wear sensors and fitting hardware need separate checks. Confirm connector, routing and the exact contents of a pad-and-hardware kit rather than assuming every service item is included. Choose Your P...

Choose BMW 228i xDrive Gran Coupe parts for the four-door all-wheel-drive model. Brake equipment, sensor connections and platform-specific chassis coverage define the application. Gran Coupe and xDrive Identification Record generation, engine code and production details, retaining both Gran Coupe and xDrive in the vehicle identification. A two-door 228i xDrive Coupe is a different chassis application. For suspension or driveline work, use explicit coverage for the actual all-wheel-drive platform. Shared engine displacement or an xDrive badge does not establish identical mounting and shaft arrangements. Plan Brake Service by Axle Match caliper, rotor material and complete dimensions before selecting pads or rotors. Front and rear applications need independent checks, including factory brake options or conversions. Compare sensor connector and wire routing, and review the contents of pad or hardware kits. Choose compound characteristics after confirming fit, using the manufacturer’s i...

Shop BMW 230i parts by generation, engine and body. F22/F23 and later G42 applications need their own intake, chassis and lighting coverage. Generation-Specific Induction Injen identifies specified F22/F23 230i 2.0T intake applications. Confirm the exact engine and production coverage rather than extending an earlier kit to a later G42 car. Compare housing, filter, turbo-side connections, ventilation fittings and mounting pieces. Record any existing inlet or charge-pipe changes so companion components suit the installed system. Brakes, Body and Lighting Identify caliper, rotor dimensions, material and axle before choosing brake components. Sensor connector and routing, pad compound and supplied hardware are separate checks. For exterior or lighting work, match the actual body and lamp assembly, including production changes, connectors and coding requirements. An M-specific body application does not automatically cover a standard 230i. Choose Your Part Identify F22/F23 or G42 and en...

Choose BMW 230i xDrive parts with generation and all-wheel-drive chassis coverage established first. Intake kits, suspension components and brake-service parts need their own equipment checks. Engine and Intake Application Injen lists specified F22/F23 230i/xDrive 2.0T intake applications. Match engine, production coverage and existing inlet connections, keeping later-generation installations separate. Compare the complete kit’s housing, filter, mounting and ventilation fittings. A replacement filter must service the actual installed intake rather than a visually similar housing. xDrive Chassis and Brake Equipment For suspension and driveline components, use explicit xDrive coverage for the exact generation and body. Review damping restrictions, mounts, spring requirements and wheel clearance. For brake service, identify caliper, rotor dimensions and material, axle and pad shape. Confirm the sensor connector and routing separately and review whether fitting hardware is included. Cho...

Choose BMW 330e parts for the plug-in hybrid 3 Series. Confirm hybrid-specific chassis coverage and the car’s actual lighting equipment before planning a change. Hybrid Chassis Applications The 330e combines petrol and electric drive. Suspension components must explicitly cover the hybrid, body and axle loads rather than relying on a non-hybrid 330i application. Engine-related upgrades need their own hybrid coverage and installation instructions. Identify the exact cooling or induction assembly instead of assuming every component follows the petrol-only car. Headlamps and Exterior Components Some G20 replacement headlights specify non-laser equipment only. Preserve that restriction and compare original lamp type, connections and any coding requirements. For a rear spoiler, match body and trunk-lid profile. Review attachment method, surface preparation and clearances in the installation instructions. Choose Your Part Identify hybrid generation and body. Require hybrid-specific suspe...

Shop BMW 330e xDrive parts for the plug-in hybrid with all-wheel drive. Brake and suspension applications must account for both the hybrid configuration and the actual body. Hybrid and AWD Together Use explicit 330e xDrive coverage for springs, dampers and drivetrain-sensitive components. Hybrid axle loads and all-wheel-drive clearance are separate requirements within the same installation. Identify the car’s production details, market and installed equipment before comparing service references. Shared 3 Series body styling does not resolve the powertrain application. Rotor, Pad and Sensor Selection Compare rotor diameter, thickness, height and venting with the installed caliper. A coated rotor is still an exact dimensional application, not a universal 3 Series replacement. Wear sensors need the proper axle, connector and routing. Check whether pad kits include them and review any required fitting hardware and bedding procedure. Choose Your Part Confirm hybrid AWD and exact body. R...

Find BMW 330i Gran Turismo xDrive parts for the F34 body and turbocharged petrol powertrain. Compare GT-specific chassis and body requirements before planning service or upgrades. Gran Turismo Engine Application Use exact engine and production identification for induction, ignition and filter purchases. The 330i Gran Turismo’s four-cylinder application should not be confused with earlier six-cylinder 330i models. For charge-air components, compare hose couplings, sensor provisions and mounting. Confirm the complete kit contents and any original parts retained. GT Body and All-Wheel-Drive Coverage Choose suspension with F34 Gran Turismo and xDrive coverage, suitable axle loads and the correct damper equipment. Review travel and alignment requirements alongside ride height. Exhaust and exterior components need GT-specific routing, length and attachment. Brake parts should follow the installed calipers and rotors rather than body identification alone. Choose Your Part Identify F34 GT,...

Shop BMW 330i parts by engine generation and body. Earlier six-cylinder cars and later turbocharged four-cylinder models need separate intake, exhaust and service applications. Exhaust Scope and Engine Coverage G2X AWE Touring selections include axle-back exhaust applications with specific production coverage. An axle-back changes the rear portion; compare retained pipework and the exact sections supplied. Check tip finish, bumper-outlet arrangement and mounting before deciding on appearance. An earlier 330i body or engine is a different exhaust application. Intake and Chassis Planning For induction components, compare engine identification, sensor connections and breather fittings. Record the housing if an aftermarket intake is already installed. Select springs and dampers by body, drivetrain and axle loads. Brake components need the installed rotor and caliper application before pad compound and sensor choices are made. Choose Your Part Identify engine, chassis and body. Compare ...

Explore BMW 330i xDrive parts with the exact engine and all-wheel-drive chassis identified. Compare induction connections and AWD suspension requirements as distinct decisions. Intake Selection by Engine Injen 330i intake applications include specified B48 turbocharged engine configurations. Check production coverage, sensor connections and breather fittings before choosing a kit. Compare an open-filter configuration with an enclosed airbox using the actual contents, mounting and filter-service access. A finish choice does not change the application requirements. All-Wheel-Drive Chassis and Exhaust Use xDrive-specific lowering coverage and the correct body, axle loads and damper type. Check front driveline and wheel clearance through the required suspension travel. For exhaust work, compare body routing, mounting and outlet configuration. Identify the current system before choosing a replacement section or conversion component. Choose Your Part Identify engine, generation and body....

Explore BMW 340i Gran Turismo xDrive parts for the F34 body and B58 six-cylinder. Use GT-specific application details when comparing induction, cooling and chassis components. B58 Intake and Cooling BMW’s F34 340i GT xDrive uses the B58 engine. Injen 340i/340i GT applications provide a starting point for comparing inlet fittings, sensor provisions and mounting. The B58 uses indirect charge-air cooling integrated with the intake system. Identify the circuit and exact component when comparing cooling upgrades; do not substitute an earlier engine’s intercooler layout. Gran Turismo AWD Chassis Choose suspension with F34 GT, xDrive and axle-load coverage. Body weight, damper type and available travel matter alongside the desired ride height. For exhaust or exterior parts, compare GT routing, length and mounting. A sedan application should not be extended simply because the engine is shared. Choose Your Part Confirm F34 GT and B58 engine. Compare inlet fittings and kit contents. Identify...

Shop BMW 340i parts for the B58-powered 3 Series. Compare intake connections, axle-back exhausts and mid-pipes as separate components of the build. Axle-Back or Mid-Pipe AWE F3X 340i Touring axle-back selections include different tip finishes, while the performance mid-pipe is a separate purchase. Review the exact pieces supplied and the starting exhaust required. Compare compatible body coverage, joining points, resonation and outlet clearance. Build the sound plan around the complete installed exhaust rather than a section name alone. B58 Induction and Chassis The 340i introduced the B58 six-cylinder to the 3 Series range. Use its specific inlet connections, sensor fittings and filter requirements when comparing intakes. Suspension and brake components still need the actual body, drivetrain and factory options. Identify calipers, rotor dimensions and damper equipment before choosing service parts. Choose Your Part Identify B58 application and body. Compare axle-back and mid-pipe ...

Choose BMW 340i xDrive parts for the B58 six-cylinder and all-wheel-drive chassis. Compare induction options with the exact connections and mounting in mind. B58 Intake Configurations Injen 340i applications include different intake configurations and finishes. Compare inlet fittings, airbox or shield contents, filter access and the pieces supplied. A later M340i is a separate chassis and engine-version application. Require exact coverage instead of transferring every B58 component between generations. AWD Clearance and Exhaust Scope Select suspension with explicit xDrive coverage, body and axle-load limits. Review front driveline clearance, mount condition and available damper travel. Exhaust purchases should identify a complete system, axle-back or joining section. Check body routing, mounting and the existing system required by each component. Choose Your Part Identify B58 version, chassis and body. Compare intake housing and connection requirements. Require xDrive suspension co...

Shop BMW 430i Gran Coupe parts by generation and turbocharged petrol engine. Earlier F36 and later Gran Coupe bodies need their own chassis and exterior applications. Induction by Engine Version Match the exact engine and emissions equipment before comparing intake kits. A related 330i listing requires explicit coverage for the actual Gran Coupe installation. Compare sensor fittings, breathers, filter housing and required adapters. Keep the intake-system reference so later filter replacements match the installed assembly. Five-Door Body and Chassis Choose exhaust and suspension components with the correct Gran Coupe generation and body coverage. Review routing, mounting and axle-load requirements separately. For lighting or exterior trim, compare attachment points and electrical equipment. Brake service needs the installed caliper, rotor and wear-sensor application. Choose Your Part Identify Gran Coupe generation and engine. Check emissions equipment and intake connections. Require...

Find BMW 430i parts for the turbocharged four-cylinder 4 Series. Compare exhaust scope, intake connections and body-specific chassis equipment before choosing an upgrade. Touring Axle-Back Scope AWE G2X Touring axle-back selections identify specific 430i production applications and tip finishes. Compare the body and bumper application as well as the supplied rear sections. An axle-back retains more original pipework than a complete cat-back. Review joining points, mounting and the required starting exhaust when planning installation. Engine and Body Selection Use exact engine and emissions coverage for intake components. Compare sensor and breather fittings, mounting and filter-service access. Suspension must cover the actual coupe, convertible or Gran Coupe body, drivetrain and axle loads. Brake parts should follow the fitted caliper and rotor rather than styling package alone. Choose Your Part Identify engine, generation and body. Compare axle-back contents and retained pipework....

Choose BMW 430i xDrive Gran Coupe parts for the five-door AWD 4 Series. Engine generation and body-specific equipment are essential for intake and chassis selection. Engine Connections and Kit Contents Compare intake applications by engine version, emissions equipment and the actual Gran Coupe generation. A shared B-series engine name does not establish every interface. Review sensor ports, breather fittings, airbox or shield contents and service-filter requirements. Confirm adapters against the existing induction system. Five-Door All-Wheel-Drive Fit Suspension needs explicit Gran Coupe xDrive and axle-load coverage. Review electronic-damper requirements, front-driveline clearance and available travel. For exhaust or exterior components, match the five-door body’s routing and attachment points. Keep brake options documented separately for pads, rotors and sensors. Choose Your Part Identify Gran Coupe generation and engine. Match emissions equipment and intake interfaces. Require f...

Explore BMW 430i xDrive parts with the petrol engine version, body and AWD chassis identified. Compare induction and suspension changes as parts of one compatible setup. Intake and Accelerator Interfaces Choose the intake for the actual engine and emissions equipment. Compare sensor fittings, breather routing, filter location and mounting pieces before choosing a finish. A throttle controller needs its own pedal connector and vehicle application. It changes response behavior rather than confirming additional engine horsepower. AWD Body and Chassis Requirements Use xDrive-specific suspension coverage and the appropriate body and axle loads. Review damper travel, electronic controls and front-axle clearance. Exhaust and body accessories must follow the exact generation and body. The 430i xDrive Gran Coupe collection provides the five-door starting point. Choose Your Part Record engine version, body and generation. Compare intake and pedal interfaces. Require xDrive suspension and axl...

Explore BMW 440i Gran Coupe parts for the F36 B58-powered six-cylinder. Keep its engine version and five-door body central when comparing induction and chassis components. B58 Intake and Cooling Interfaces Compare an intake’s exact engine-version and F36 coverage, sensor fittings, breather connections and mounting. A listing for another B58 model needs explicit Gran Coupe coverage. For cooling work, identify the actual circuit and assembly. B58 charge cooling uses an indirect arrangement, so earlier engine intercooler layouts are not a default replacement application. Gran Coupe Exhaust and Chassis Exhaust components need F36 routing, mounting and bumper-outlet coverage. Compare complete systems with axle-backs or joining sections using their actual contents. Suspension should match body, drivetrain, axle loads and damper equipment. Brake parts need the installed caliper and rotor application rather than the engine badge alone. Choose Your Part Identify F36 B58 version and drivetra...

Find BMW 440i parts for the B58-powered 4 Series. Compare intake connections, cooling circuits and exhaust scope around the exact body and existing modifications. B58 Induction and Cooling Use engine-version and chassis coverage when comparing intakes. Check sensors, breathers, inlet fittings and mounting before choosing a filter enclosure or finish. Identify the charge-cooling circuit and original assembly before selecting cooling components. Earlier 435i engine hardware and later M440i applications are separate checks. Exhaust and Body Configuration Compare complete exhausts, axle-backs and mid-pipes by their supplied sections and required starting system. Match body routing, joining points, valves and bumper outlets. For five-door body applications, see the 440i Gran Coupe collection. Suspension and exterior parts need body-specific coverage. Choose Your Part Identify B58 version and exact body. Compare inlet fittings and kit contents. Identify cooling circuit and existing modif...

Choose BMW 440i xDrive Gran Coupe parts for the F36 B58 six-cylinder and AWD chassis. Compare intake designs with exact engine and five-door installation coverage. Intake Design and Service Access Injen B58 selections provide different intake configurations and finishes. Confirm F36 engine coverage, sensor connections, breather fittings and the pieces included. Compare filter access, enclosure or shielding and the specified replacement element. A kit for another B58 model requires explicit coverage for the actual installation. F36 All-Wheel-Drive Chassis Suspension must cover Gran Coupe xDrive and suitable axle loads. Review electronic-damper requirements, front-driveline clearance and available travel. Exhaust and exterior parts need the F36 body’s routing and attachment. Record the brake option separately before selecting pads, rotors and sensors. Choose Your Part Identify F36 B58 and xDrive configuration. Compare intake fittings and filter access. Require Gran Coupe AWD suspensi...

Explore BMW 440i xDrive parts with engine version, body and AWD chassis established. Intake, exhaust and suspension purchases need their own complete application checks. Induction and Pedal Interfaces Compare the intake’s B58 version, sensor fittings, breathers, mounting and supplied housing or shield. Retain the system reference for future filter service. A pedal controller interfaces with the accelerator connector. Its response adjustment is separate from engine calibration and does not establish additional horsepower. Body and AWD Equipment Choose suspension with xDrive, body and axle-load coverage. Review front-axle clearance, electronic-damper equipment and compatible travel. For exhaust and body components, compare routing, mounting and outlet dimensions. Use the 440i xDrive Gran Coupe collection for the five-door application. Choose Your Part Identify engine version and body. Match intake and pedal connections. Require AWD suspension and axle-load coverage. Compare exhaust a...

Choose BMW 530e parts for the plug-in hybrid 5 Series. Hybrid-specific chassis coverage and the exact cooling or service assembly matter when planning a purchase. Hybrid Powertrain Application The 530e combines petrol and electric drive. Shared petrol-engine features do not establish every induction, cooling or chassis application. Identify the particular circuit and component being serviced and use hybrid-specific installation information. Engine cooling and hybrid-related thermal systems should not be treated as one interchangeable assembly. Chassis and Brake Configuration Suspension must explicitly cover the hybrid, body and axle loads. Review electronic dampers and any rear-system requirements before choosing springs or dampers. Brake parts need the installed caliper, rotor dimensions, axle and sensor application. Compare kit contents and the selected compound’s operating and bedding guidance. Choose Your Part Identify hybrid generation, body and drivetrain. Identify the exact ...

Find BMW 530e xDrive parts for the plug-in hybrid with AWD. Brake service and chassis changes need the actual hybrid body and installed equipment identified. Hybrid AWD Chassis Coverage Require explicit 530e xDrive coverage for suspension and drivetrain-sensitive components. Hybrid axle loads and front-driveline clearance are separate requirements. Record body, generation, electronic dampers and rear-system equipment. Review compatible travel and any control-system provisions in the manufacturer’s instructions. Rotor and Sensor Applications Compare rotor diameter, thickness, height, material and mounting against the installed caliper. Coating or finish does not replace the dimensional application check. Wear sensors need the correct axle, connector and routing. Review pad and hardware contents so the brake-service plan includes the required pieces. Choose Your Part Confirm hybrid AWD generation and body. Record dampers and rear suspension system. Match rotor dimensions and calipers...

Explore BMW 530i parts by engine generation and body. Earlier six-cylinder and later turbocharged applications need separate engine-service and induction coverage. Engine and Service Components Use engine identification and production details before choosing intake or ignition hardware. The 530i designation is not one universal engine application. Match filters to the original airbox or the installed aftermarket housing. Sensor fittings, breathers and inlet connections should follow the actual assembly. Headlamp and Chassis Equipment DRL modules must match headlamp technology, production period and connector. A related M5 styling description does not prove compatibility with every 530i lamp. For suspension and brake work, record body, drivetrain, damper type, axle loads, calipers and rotors. Compare each component’s application and installation contents. Choose Your Part Identify engine and generation. Match intake housing and connections. Record headlamp module and connector. Iden...

Shop BMW 530i xDrive parts with the petrol engine and AWD chassis identified. Brake equipment and suspension options should be checked separately from the model badge. Rotor and Pad Compatibility Compare rotor diameter, thickness, height, mounting and material with the installed caliper. A broad 5 Series or related-model description does not resolve every option. Select pad shape and axle first, then compare compound use and required bedding. Check sensors and fitting hardware in the kit contents. AWD Engine and Chassis Details Identify the actual engine for filters, induction and ignition components. Match sensors, connections and mounting to the installed assembly. Suspension needs xDrive, body, axle loads and damper coverage. Review front-driveline clearance and any rear-system requirements before changing ride height. Choose Your Part Identify engine, generation and body. Measure rotors and identify calipers. Compare pads, sensors and hardware. Require AWD suspension and axle-l...

Explore BMW 540i parts by engine generation and body. Earlier V8-powered cars and later turbocharged six-cylinder models need entirely different induction and service applications. V8 or Six-Cylinder Application Identify the actual engine before choosing intake, ignition, cooling or filter components. A shared 540i name does not establish the engine’s layout or connections. For an aftermarket housing or modified cooling system, retain installed references. Service parts should match the assembly fitted rather than the car’s original specification alone. Lighting and Chassis Options DRL modules need the exact headlamp technology, module, connector and production coverage. Similar styling does not settle the electrical application. Choose suspension by body, drivetrain, axle loads and damper equipment. Brake parts need caliper, rotor and axle identification before compound or kit contents are compared. Choose Your Part Identify V8 or six-cylinder engine generation. Record installed i...

Shop BMW 540i xDrive parts with engine generation, AWD body and brake equipment identified. Chassis service should follow the actual assemblies rather than model-family similarity. Rotor and Hardware Applications Compare rotor diameter, thickness, height, mounting and material with the installed caliper. A part listed for another BMW needs confirmed cross-coverage. Identify each axle’s pads, sensors and hardware separately. Review kit contents so clips, sensors or other required pieces are not inferred from the pad listing. Engine and AWD Chassis Coverage Use exact engine and production identification for induction, ignition and cooling parts. Compare the installed housing, fittings and mounting. Suspension needs xDrive, body, axle loads and damper coverage. Retain any engine-version, rear-system or hybrid-related restriction in the application. Choose Your Part Identify engine generation and body. Measure rotors and identify calipers. Check each axle’s sensors and hardware. Requir...

Find BMW 640i xDrive Gran Turismo parts for the G32 B58-powered five-door. Use its engine version and GT-specific chassis equipment when choosing service or upgrade components. G32 B58 Engine Application BMW identifies the B58 in the G32 640i xDrive Gran Turismo. Do not transfer an earlier F06 640i Gran Coupe engine-component application without explicit coverage. Compare intake sensors, breathers, inlet fittings and housing references. For cooling purchases, identify the actual charge-cooling or engine-cooling circuit and assembly. GT Chassis and Body Coverage Suspension must cover G32 GT xDrive, axle loads, electronic dampers and the rear-system arrangement. Review which original parts a kit retains or replaces. Exhaust and exterior components need GT routing, length and attachment. Brake parts should follow the installed caliper, rotor and sensor application separately. Choose Your Part Identify G32 B58 version and equipment. Compare intake and cooling interfaces. Require GT AWD...

Explore BMW 740i parts by engine generation and body. Earlier V8 and later turbocharged six-cylinder applications require different induction and service references. Identify V8 or Six-Cylinder Use engine and production identification before selecting filters, ignition, intake or cooling components. A shared 740i name does not establish the engine layout. Record original or aftermarket housings and any cooling or management changes. Service elements should follow the assemblies installed. Lighting and Chassis Options DRL modules must match the actual headlamp, module number, connector and production coverage. A model-year range is only part of the electrical application. Choose suspension and brakes using body, drivetrain, axle loads, damper equipment, calipers and rotors. Review sensors and hardware separately from friction parts. Choose Your Part Identify engine generation and exact body. Record installed service assemblies. Match headlamp modules and connections. Check chassis a...

Choose BMW 740i xDrive parts with the petrol engine, generation and AWD body identified. Exact brake and suspension equipment guide service purchases. Rotor, Pad and Hardware Applications Compare rotor diameter, thickness, height, mounting and material with the installed caliper. Related-model listings require confirmed cross-coverage. Identify pads, sensors and fitting hardware separately for each axle. Review the actual contents rather than inferring a complete service kit from one component title. Engine and AWD Chassis Interfaces Use exact engine and production details for intake, ignition, filter and cooling parts. Compare installed housing references, sensor fittings and mounting. Suspension must explicitly cover xDrive, body, axle loads and damper or rear-system equipment. Retain any engine-version or hybrid-related restriction in the application. Choose Your Part Identify engine, generation and AWD body. Measure rotors and identify calipers. Check sensors and hardware by ax...

Explore BMW 840i Gran Coupe parts for the modern six-cylinder four-door 8 Series. Body-specific chassis coverage and installed brake equipment guide a complete service plan. Six-Cylinder and Four-Door Details BMW’s modern 840i Gran Coupe uses a six-cylinder petrol application. Match exact engine and production details for induction, ignition and cooling components. Suspension and exhaust components need Gran Coupe routing, mounting and axle-load coverage. A two-door coupe application should not be extended without stated coverage. Brake Hardware and Sensor Selection Confirm hardware against the actual caliper and axle. A kit listed for another BMW needs manufacturer cross-coverage with the installed assembly. Match rotors and pad shape separately, then check sensors, connectors and fitting-hardware contents. Compare compound use after the brake application is established. Choose Your Part Identify modern Gran Coupe engine and drivetrain. Require four-door chassis and exhaust covera...

Shop BMW 840i parts by chassis generation and body. Classic 8 Series and modern six-cylinder applications need distinct engine-service and chassis references. Identify the Actual 8 Series Record chassis, engine and production information before choosing intake, ignition, filters or cooling parts. The 840 designation has been used across different 8 Series generations. For modern coupe, convertible or Gran Coupe applications, use the exact body and drivetrain. Exhaust routing, exterior mounting and suspension axle loads need their own coverage. Lighting and Brake Equipment DRL modules must match the actual headlamp, module, connector and production details. A related M8 styling description does not establish compatibility with every lamp. Brake hardware and friction parts should follow the installed caliper, rotor and axle. Confirm cross-coverage where another BMW appears in the component title. Choose Your Part Identify chassis generation, engine and body. Match exhaust and chassis...

Find BMW 840i xDrive Gran Coupe parts for the modern six-cylinder AWD four-door. Body, drivetrain and brake equipment need precise coverage for service and chassis purchases. Six-Cylinder AWD Interfaces Use exact engine and production identification for filters, induction, ignition and cooling components. Compare housings, fittings, sensors and mounting. Drivetrain-sensitive parts also need xDrive routing and clearance. A shared six-cylinder engine does not settle every body or front-axle application. Brake and Four-Door Chassis Details Confirm fitting hardware against the installed caliper and axle. Related-model titles require manufacturer cross-coverage rather than assumed interchangeability. Suspension must cover Gran Coupe xDrive, axle loads and damper or rear-system equipment. Review travel and clearance together with alignment requirements. Choose Your Part Identify engine and AWD four-door configuration. Compare service interfaces and routing. Confirm brake hardware by asse...

Find BMW 840i xDrive parts for the modern six-cylinder AWD 8 Series. Establish whether you have the coupe, convertible or Gran Coupe before comparing body-sensitive components. Engine Service and AWD Layout Match induction, filtration and cooling components to the engine, production date and installed housings. Compare sensor provisions, connections and mounting rather than selecting by engine displacement alone. For drivetrain and underbody work, require xDrive coverage. Front driveline clearance and routing are separate considerations from engine compatibility. Body and Chassis Choices Use the actual body for exhaust routing, exterior mounting and suspension applications. Convertible and four-door axle loads or structural details can differ from the coupe. Record dampers, rear suspension equipment, brake calipers and rotor dimensions. Choose a suspension system around the ride-height goal and equipment it retains. Choose Your Part Identify body and production date. Match six-cyli...

Find BMW M2 parts by chassis generation and engine. F87 and G87 intake, exhaust, lighting and brake applications need their own coverage. Engine and Exhaust by Generation Separate the earlier F87 engine applications from the later G87 before choosing induction or cooling components. A shared M2 designation does not establish inlet connections or engine compatibility. For an exhaust, match chassis, body routing, outlets and valve requirements. Compare a complete system with a mid-pipe or conversion section so the starting setup is clear. Lighting and Control Interfaces DRL modules must match original headlamp technology, module, connector and production coverage. Appearance and yellow-light styling do not identify the electrical application. A pedal-response controller needs exact accelerator-interface coverage. It changes response behavior and should not be treated as a verified engine-output increase. Choose Your Part Identify F87 or G87 and exact engine. Compare exhaust routing, ...

Choose BMW M235i xDrive Gran Coupe parts for the F44 four-cylinder AWD four-door. Brake service needs the actual caliper and sensor applications rather than a two-door M235i assumption. Four-Cylinder AWD Body Details BMW’s F44 M235i xDrive Gran Coupe uses a four-cylinder engine. Its induction, exhaust and drivetrain applications differ from the six-cylinder two-door M235i. Chassis components need explicit Gran Coupe xDrive coverage. Compare axle loads, damper requirements, mounting and underbody clearance for the actual installation. Pads, Sensors and Fitting Hardware Record caliper, axle, rotor dimensions and pad shape before choosing compound. Another BMW, Mini or Supra in the title requires confirmed manufacturer cross-coverage. Match front and rear sensors separately by connector and routing. Compare hardware contents against the installed caliper rather than assuming the pad set includes every fitting piece. Choose Your Part Identify F44 four-cylinder AWD application. Require ...

Choose BMW M240i parts by F22 or G42 generation, body and drivetrain. Exhaust sound, tip configuration and installation scope should be compared for the exact system. Exhaust Configuration and Kit Scope F22 axle-back applications and G42 exhaust systems have different routing and installation requirements. Select generation and body before comparing Touring or Track configurations. Compare resonation, manufacturer sound guidance and original-tip or replacement-tip requirements. Review what is supplied so the purchase matches the existing exhaust and desired outlet arrangement. B58 and Chassis Details Induction and charge-cooling components need the actual B58 version, connections and mounting. A shared engine-family name does not establish every generation’s interfaces. For suspension, record drivetrain, axle loads and damper equipment. Brake selection follows the actual caliper, rotor, pad shape and axle rather than the styling package alone. Choose Your Part Identify generation, ...

Find BMW M240i xDrive parts for the six-cylinder AWD two-door, with generation and body identified. Exhaust configurations and intake interfaces should match the actual installation. Exhaust Sound and Outlets For G42 exhaust options, compare Touring and Track configurations using the manufacturer’s sound guidance and resonator arrangement. Establish whether the system retains original tips or supplies replacements. Earlier-generation or different-body systems need their own routing and mounting coverage. A shared M240i badge does not establish exhaust interchangeability. Intake and AWD Chassis Details Match induction components to the B58 version, sensor provisions and inlet connections. Compare filter service access, adapters and mounting hardware included with the kit. Chassis components need xDrive coverage and appropriate axle-load limits. Identify dampers and check front-driveline clearance alongside wheel and suspension travel. Choose Your Part Identify generation and body. C...

Find BMW M3 parts by generation, engine and body. Modern F8X and G8X intake or exhaust applications should be matched precisely before comparing sound, appearance and installation scope. Induction and Exhaust by Generation Match intake housings, turbo-inlet connections and sensor provisions to the exact engine. Shared M3/M4 coverage still needs the correct generation and installation details. Compare full exhaust systems with mid-pipes and conversion sections. Review resonation, valve operation, tips and the compatible starting exhaust for each configuration. Body and Brake Equipment Exterior components need the actual sedan, coupe, convertible or Touring application where relevant. Compare mounting and required original trim rather than transferring one body’s spoiler application. Brake pads and rotors follow the installed caliper, dimensions, material and axle. Confirm iron or carbon-ceramic equipment before selecting friction components or a conversion. Choose Your Part Identify...

Shop BMW M340i parts with the B58 version, body and exhaust configuration identified. Compare complete systems, sound configurations and conversion pieces as different purchases. Exhaust Sound, Resonation and Tips AWE configurations include Touring and Track choices, resonated or non-resonated arrangements and original-tip or quad-tip layouts. Compare the exact system’s sound guidance and supplied components. A resonation conversion or tip conversion needs a compatible starting exhaust. Check the required system and which sections or outlet components are retained before choosing a kit. Lighting and Powertrain Interfaces For a complete headlamp or DRL module, match original lamp technology, connector and production period. A non-laser-only application should not be extended to laser-equipped lamps without explicit coverage. Engine and chassis components need the actual B58 version, drivetrain and body. Match intake connections and suspension equipment separately from the exhaust or ...

Find BMW M340i xDrive parts with the B58 version, body and production details identified. Intake and brake purchases need exact interfaces, while chassis applications must account for AWD. Intake Construction and Service Access Compare enclosed or open intake arrangements by the actual kit’s mounting, filter service access and inlet connections. Finish alone does not identify the application. Match engine version, sensor provisions and required adapters. A related M240i or M440i title needs confirmed coverage for the installed M340i setup. Brake Hardware and AWD Chassis Wear sensors require the correct axle, connector and routing. Match fitting hardware to the caliper and check the pieces supplied separately from pads. Suspension must cover body, xDrive, axle loads and damper equipment. Review front-driveline clearance and permitted travel alongside the intended ride height. Choose Your Part Identify B58 version and AWD body. Compare intake mounting and filter access. Match sensor ...

Explore BMW M4 parts by F8X or G8X generation, engine and body. Intake, exhaust and brake choices should match the exact coupe or convertible application. Induction and Exhaust Configuration Use exact engine-generation coverage for intake housings, inlet connections and sensors. Shared M3/M4 applications still need the correct installation details. Compare complete exhausts with mid-pipes and conversion sections. Review valve behavior, resonation, tips and the compatible starting system before choosing the configuration. Body and Brake Options Body-sensitive parts require explicit coupe or convertible coverage. Routing, mounting and chassis axle loads should follow the actual body and drivetrain. Match brake components to the installed caliper, rotor dimensions, material and axle. Keep carbon-ceramic and iron applications separate unless the manufacturer specifies a complete compatible conversion. Choose Your Part Identify engine, generation and body. Compare inlet interfaces and e...

Find BMW M440i Gran Coupe parts for the six-cylinder four-door 4 Series. Body coverage, intake connections and brake equipment guide compatible service and upgrade choices. Four-Door Powertrain and Routing Match intake components to the actual engine version, sensor provisions and inlet connections. A shared B58 family name does not establish every production variant’s interfaces. Exhaust and body-sensitive chassis parts need Gran Coupe coverage. A two-door application should not be extended without stated routing, mounting and axle-load compatibility. Rotors, Pads and Sensor Details Record rotor diameter, thickness, material and side for each axle. Match pads by installed caliper and shape before comparing compound use. Wear sensors require the correct connector and routing. Confirm manufacturer cross-coverage when another BMW or Supra model appears in a product title. Choose Your Part Identify engine version and four-door body. Match intake and exhaust interfaces. Record rotors a...

Explore BMW M440i parts with body, drivetrain and B58 version identified. Exhaust sound configurations, resonation and tip conversions need a compatible starting system. Choose the Exhaust Configuration Compare Touring or Track choices using the exact system’s sound guidance, resonator arrangement and body coverage. Establish whether original tips are retained or replacement outlets supplied. A resonation or tip conversion changes specified components of an existing system. Review the required starting exhaust and supplied sections before ordering it as part of a build. Engine and Body Interfaces Match induction components to engine version, sensors, inlet connections and mounting. Shared M340i/M440i wording still needs explicit application coverage. Body-sensitive exhaust and chassis parts must cover the actual coupe, convertible or Gran Coupe. Record drivetrain, axle loads and damper equipment before suspension changes. Choose Your Part Identify body, drivetrain and B58 version. ...

Choose BMW M440i xDrive Gran Coupe parts for the six-cylinder AWD four-door. Intake installation and brake applications need exact component references alongside body and drivetrain coverage. B58 Intake and Four-Door Details Compare the complete intake’s housing, filter access, sensor provisions, adapters and mounting. Confirm the engine version and production application before choosing finish or construction. Exhaust and chassis applications must cover Gran Coupe xDrive. Four-door routing and front-driveline clearance are separate requirements from a shared engine application. Brake Pads and Sensor Connections Match pads by caliper, axle, shape and rotor material, then choose compound by its intended conditions. Related-model titles need confirmed manufacturer cross-coverage. Wear sensors require the correct connector and routing for each axle. Check hardware contents against the installed caliper to complete the service plan. Choose Your Part Identify B58 version and AWD four-do...

Find BMW M440i xDrive parts by body, production and B58 version. Compare intake installation details and brake-service contents while retaining exact AWD chassis coverage. Intake Interfaces and Service Access Match the engine version, inlet connections, sensors and mounting before comparing intake construction or finish. Review adapters and hardware supplied with the system. Keep the actual body identified for exhaust and underbody components. Engine compatibility alone does not settle body routing or xDrive clearance. Pads, Hardware and AWD Equipment Brake pads need the installed caliper, rotor material, axle and shape. Compare compound guidance and the hardware pieces included in the specific kit. Sensors need their own connector and routing coverage. Suspension must account for xDrive, body, axle loads and electronic damper or rear-system equipment. Choose Your Part Identify B58 version and AWD body. Compare intake interfaces and supplied adapters. Match brake application and ha...

Choose BMW X1 parts by chassis generation, engine and sDrive or xDrive configuration. Brake and accessory applications vary across the model’s different layouts. Brake Dimensions and Connections Record rotor diameter, thickness, caliper and pad shape for each axle. A 335 mm rotor listing applies only where the actual brake assembly and manufacturer coverage match. Brake hoses and wear sensors also need correct length, routing and connections. Confirm shared BMW or Mini applications against the installed assembly. Engine Accessories and Chassis Generation Match engine accessories to the actual engine, management and connections. Separate a complete injection system from a plate or conversion component requiring an existing setup. Suspension coverage needs exact generation, drivetrain, axle loads and damper equipment. An sDrive or xDrive badge without chassis information does not settle every mounting or clearance requirement. Choose Your Part Identify chassis, engine and drivetrain....

Find BMW X2 parts with generation, engine and brake option identified. Match rotor-and-pad kits, sensors and fitting hardware to the assemblies installed on the car. Complete Brake-Kit Selection Record each axle’s rotor diameter, thickness and material, caliper and pad shape. A shared X1 or Mini application needs confirmed manufacturer coverage. Compare a matched pad-and-rotor kit with separate components by contents and intended compound use. Check whether fitting hardware and sensors are included or require separate selection. Sensors and Chassis Equipment Wear sensors need the correct axle, connector and routing. Broad multi-model hardware titles still need coverage for the actual caliper. For chassis parts, record generation, drivetrain, axle loads and damper type. Body resemblance or engine displacement alone does not identify mounting and suspension requirements. Choose Your Part Identify generation, engine and brake option. Match rotor dimensions and pad shape. Compare kit c...

Explore BMW X3 parts by generation, engine and drivetrain. Identify the standard, M Performance or X3 M application before choosing induction, exhaust or chassis components. Powertrain and Model-Family Details Record engine and production information for filtration, induction and cooling purchases. An X3 M application should not be extended to a standard X3 solely because the body family is shared. Exhaust components need the actual engine, body routing, outlet arrangement and valve requirements. Compare complete systems with individual sections and conversion pieces. Suspension and Brake Equipment Record electronic damper or other installed suspension systems before choosing struts or lowering components. Compare axle-load limits, mounting and equipment retained by the kit. Brake service follows actual caliper, rotor dimensions and material, pad shape and axle. Sensors and fitting hardware need their own connection and assembly coverage. Choose Your Part Identify generation, engin...

Choose BMW X3 M parts with chassis, production and brake option identified. The F97 S58 engine application is distinct from ordinary X3 and M40i powertrain coverage. S58 Intake and Exhaust Interfaces For the F97 X3 M, match induction and charge-cooling components to the S58 application and actual connections. A related M model still needs exact kit coverage. Compare exhaust sections by routing, valve operation, outlets and supplied components. A mid-pipe or axle-back is a different purchase from a complete system. M Chassis and Brake Details Suspension must cover the X3 M body, axle loads and original electronic equipment. Review permitted lowering, travel and which factory components the kit retains. Match pads and rotors to the installed caliper, rotor dimensions, material and axle. Confirm standard or optional brake equipment before choosing compound or hardware. Choose Your Part Identify F97 S58 and production. Match induction and exhaust interfaces. Require X3 M chassis equipm...

Find BMW X4 parts by generation, engine and exact model variant. Exhaust, lighting and strut applications need their own powertrain and equipment coverage. Exhaust and Lighting Application Separate ordinary X4, M Performance and X4 M engine applications before choosing exhaust sections. A product title naming X3 M needs explicit coverage for the X4 configuration. DRL modules require original headlamp technology, connector, module reference and production period. Desired styling does not identify the electrical application. Struts and Brake Service For replacement struts, check electronic-suspension exclusions and match the installed equipment. Review mounts, boots and bump stops separately from the damper. Match brake rotors, pads and sensors by installed caliper, dimensions, material and axle. Sensor connector and routing need separate confirmation from compound choice. Choose Your Part Identify generation, engine and variant. Confirm exhaust body and powertrain coverage. Match or...

Explore BMW X4 M parts with chassis, production and installed brake option identified. F98 S58 applications require their own induction, exhaust and chassis coverage. S58 and Coupe-SUV Installation Match intake and charge-cooling components to the actual S58 version, sensor provisions and connections. Shared X3 M coverage needs explicit manufacturer support for the X4 M installation. Body-sensitive exhaust parts need correct routing, mounting and outlets. Compare complete systems, axle-back sections and mid-pipes by what is supplied and retained. Electronic Chassis and Brake Options A suspension kit must cover X4 M axle loads and installed electronic equipment. Review permitted lowering, travel and the factory components retained. Brake pads and rotors need caliper, dimensions, material and axle coverage. Match sensors and hardware separately, and assess compound use after the physical application is established. Choose Your Part Identify F98 S58 production details. Match body-sens...

Choose BMW X5 parts by generation, engine and factory equipment. Floor liners, lighting modules and engine accessories each need different application details. Interior Protection and Lighting For floor liners, match exact body generation, seating layout and rows covered. Compare retention points and the pieces supplied with the set. DRL modules require the actual headlamp, connector, module and production period. An X5/X6 shared styling description should not replace electrical application checks. Engine and Brake Service Interfaces Match engine accessories to the actual engine and installation scope. A torsional damper needs exact engine, crankshaft and accessory-drive coverage; an injection conversion requires a compatible starting system. Brake components follow installed caliper, rotor dimensions and material, pad shape and axle. Suspension applications also need the exact spring or air system, dampers and axle-load limits. Choose Your Part Identify generation, engine and seat...

Explore BMW X6 parts with generation, engine and installed equipment identified. Lighting, brake service and engine accessories need exact connections and application coverage. Headlamp and Brake Interfaces Match DRL modules to original headlamp technology, module reference, connector and production period. Styling color alone does not establish electrical compatibility. Brake rotors need correct axle, dimensions, material and side. Match sensors by connector and routing separately from pad or rotor choice. Engine Accessories and Body Details For an injection accessory, distinguish a complete system from a conversion plate. Compare engine interfaces, compatible starting equipment and components supplied. Exhaust and suspension applications require X6 body coverage. Record drivetrain, axle loads, dampers and rear-system arrangement rather than assuming every X5 application transfers. Choose Your Part Identify generation, engine and body equipment. Match original headlamp interfaces....

Find BMW X7 parts by engine, production and installed brake equipment. Rotor dimensions, sensor routing and chassis-system coverage guide a complete service plan. Brake Rotors, Pads and Sensors Record caliper, rotor diameter, thickness and material for each axle. Directional rotors need the correct side as well as exact mounting and application coverage. Wear sensors require matching connector and routing. Related XB7, X5 or 7 Series titles need manufacturer cross-coverage for the actual brake assembly. SUV Load and Equipment Details Suspension components require X7 body and axle-load coverage with the installed air or electronic systems identified. Compare the kit’s retained components and stated installation scope. Engine-service parts need the actual engine version and production details. Separate standard X7 and ALPINA applications where powertrain or chassis equipment differs. Choose Your Part Identify engine, production and brake option. Record rotor dimensions and side. Matc...

Explore BMW Z4 parts by generation, engine and transmission. Crankshaft dampers and pedal-control accessories need exact application details rather than a shared roadster badge. Crank Damper Specification Compare engine, crank mounting, accessory grooves, pulley dimensions and any stated underdrive or overdrive configuration. Review dry-sump or other build-specific requirements before selecting a damper. Shared Supra/B58 coverage needs the correct engine version and installation. Earlier Z4 engines and unrelated damper families require separate references. Pedal Interfaces and Chassis Details A pedal-response controller must match the vehicle’s accelerator connection and application. It changes response behavior rather than establishing a verified engine-output gain. Brake and suspension parts need generation, engine, caliper or damper equipment and axle-load coverage. Record body and gearbox where routing or installation depends on them. Choose Your Part Identify generation, engin...

Shop Dinan intake, exhaust, suspension, ignition, wheel, transmission, and carbon-fiber components at Black Ops Auto Works. Compare vehicle-specific upgrades and service parts for selected BMW applications, along with selected Toyota GR Supra accessories. Choose by the exact Dinan manufacturer part number, vehicle configuration, and installation requirements. Dinan Cold Air Intakes and Turbo Inlet Components Explore carbon-fiber intake systems, replacement filters, and selected turbo inlet fit kits. The collection includes intake applications for BMW 230i, 330i, 430i, M2, M3, M4, X1, and other listed models. Coverage depends on the engine, body style, production period, and exact part number. A replacement filter is a service item for its specified intake; it is not a complete intake kit. Likewise, a turbo inlet fit kit may supply supporting connections rather than the entire intake assembly. Review the package contents and compatibility with factory or previously installed componen...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Ignition parts keep every cylinder firing on time and every start crisp, and Black Ops Auto Works stocks the full system in one collection. Spark plugs, coil packs, plug wires, distributors, starters, sensors, and glow plugs from NGK, Granatelli, MSD, Ford Performance, Moroso, Mishimoto, HKS, and COBB all live here. Whether you are chasing a weak spark on a daily driver, refreshing a tune-up on an LS or Coyote build, or wiring in a full coil-on-plug conversion, this collection has the OEM-grade replacements and the performance upgrades to keep the mixture lighting off cleanly under boost, high RPM, or heavy load. What Belongs in the Ignition System The ignition system is more than just the spark plug. Every part in this collection plays a role in taking 12-volt battery power, stepping it up to tens of thousands of volts, and delivering that spark to the right cylinder at the right instant. Weakness anywhere in the chain shows up as misfires, hard starts, poor mileage, or a chec...

Find MINI Cooper Clubman brake components for the exact generation and installed brake package. JCW equipment, caliper type and production details matter when selecting pads, rotors or wear leads. Pads and Rotor Geometry Compare pad backing shape and thickness with the actual caliper. A listing marked “Excl Clubman” must not be treated as a confirmed Clubman application. For a 335mm rotor reference, match diameter, thickness, overall height and mounting against the supported caliper package. Another MINI or BMW model’s dimensions alone do not establish complete fit. Wear Leads and Service Contents Match front and rear wear-sensor connectors, lead lengths and routing independently. Review whether the pad package includes the required sensor and fitting hardware. Compare ceramic and low-metallic friction by exact application, intended use and manufacturer requirements. Select compatible pads and rotors for each axle. Choose Your Part Record production, trim and actual caliper package...

Compare MINI Cooper Countryman brakes by production, trim and installed caliper package. Identify drivetrain and powertrain designation before extending an application from another MINI or BMW. Caliper and Friction Matching Match backing-plate shape, pad thickness and rotor material at each axle. Paceman or BMW references require explicit Countryman support. A 335mm JCW rotor is a brake-package-specific selection. Compare full rotor geometry and mounting rather than assuming diameter or badge establishes fit. Wear Sensors and Axle Contents Confirm sensor connectors, lead lengths and routing for the actual front and rear assemblies. Check required service hardware and package contents separately. Review the selected ceramic or low-metallic compound’s intended use and installation requirements. Front-pad support does not establish rear-pad or rotor compatibility. Choose Your Part Identify generation, full trim/powertrain and installed brakes. Match caliper-specific pad shape and fric...

Find MINI Cooper intake, exhaust and engine-drive components by exact chassis, engine and body configuration. Naturally aspirated, Cooper S and later engine applications require separate part-number checks. Intake and Exhaust Configuration Match an Injen system to exact engine, induction layout, sensor connections and mounting. Non-S 1.6 references must not be extended to turbocharged or other engine configurations. For a Borla F57 exhaust reference, confirm exact body, engine, drivetrain and mounting support. Review pipe connections, hangers, tip clearance and supplied system section. Crank Dampers and Drive Interfaces Select an ATI damper for the actual engine and accessory-drive arrangement. B46/B48 and 1.6 references are separate applications; compare crank fit, belt grooves, alignment and fastening instructions. A different drive diameter can change the supported setup. Confirm the exact manufacturer application and required fasteners rather than choosing by pulley size or bolt...

Request MINI Cooper S parts guidance with exact model year, chassis/body, engine and drivetrain. Confirm the supported manufacturer application before selecting an upgrade or service component. Identify the Exact Cooper S Provide chassis and engine identification alongside the Cooper S designation. Include body style, transmission and any changed intake, exhaust, brakes or suspension. Parts for one engine or body configuration should not be assumed to fit every Cooper S. Prepare an Application Enquiry Send the existing component number and the manufacturer number being considered. Dimensions and assembly photographs can help resolve modified equipment. Confirm exact fit, installation requirements and package contents before ordering. Ask our team for application help if no suitable item is displayed. Choose Your Part Record model year, chassis/body and engine. Identify transmission, drivetrain and modifications. Provide existing and proposed part numbers. Confirm application, insta...

Spark plugs for cars, trucks, SUVs, and import platforms are stocked at Black Ops Auto Works. Shop iridium spark plugs, laser iridium spark plugs, double platinum spark plugs, nickel spark plugs, and racing spark plugs for LS, LT, HEMI, EcoBoost, Subaru EJ and FA, and import turbo engines. Every product is filterable by heat range, thread size, gap, and vehicle year, make, model, and engine so the correct spark plug ships the first time. Black Ops Auto Works carries 480 spark plug SKUs across every major electrode material and heat range. What This Category Covers Spark plugs ignite the compressed air and fuel mixture in each cylinder, and the correct plug for your engine depends on electrode material, heat range, and thread specification. Choosing the wrong heat range or gap can cause misfires, fouling, or in extreme cases pre-ignition damage. Electrode Materials Iridium and laser iridium plugs use a fine center electrode for a stronger, more consistent spark and the longest se...

Find Toyota GR Supra cabin protection, engine bearings and manual-clutch applications using exact engine and transmission details. Separate measured engine-build requirements from street or race clutch choices. B58 Bearings and Oil Clearance Main and connecting-rod bearings serve different locations. Confirm actual engine code, measured journals/housings and the builder’s target clearance before selecting a set. ACL H and HX standard-shaft references do not provide the same oil clearance. HX denotes extra clearance; choose from measured build requirements rather than treating it as an automatic upgrade. Manual Clutches and Cabin Protection ACT Mod-Twin applications require the supported manual transmission, engine, spline and complete release arrangement. Sprung/rigid, street/race and clamp-load choices should follow intended use and the exact kit specification. First-row mats and cargo liners cover different areas. Match production, cabin/load-floor geometry and retention points, a...

Shop Toyota GR Supra exhaust, intake and lighting applications using exact production, engine and current equipment. Compare exhaust resonation and intake interfaces before selecting finish or accessories. Touring, Track and Resonation AWE Touring and Track are separate sound choices; resonated versus non-resonated is an additional configuration decision. Review the existing downpipe and desired cabin sound together. AWE states its system will not fit 2026 Final Editions with factory bracing retained. Confirm the exact vehicle and installation restrictions rather than extending a 2020-on title to every edition. Intake and Accessory Interfaces A 3.0-litre Injen intake/charge-pipe package requires exact engine, sensor and mounting support. Confirm all included pieces and interfaces to the existing charge system. DRL modules need the correct headlamp/electronic application. Wind diffusers and carbon intakes have separate mounting and production requirements; verify each exact part numb...

Find Toyota Supra damper, intake and gauge-accessory applications by generation and actual engine. Keep JZ-engine builds separate from later B58 and other engine references. Damper and Accessory-Drive Configuration Stock-drive, underdrive and dry-sump pulley arrangements serve different builds. Confirm the exact damper, crank attachment, belt layout and supporting external drive requirements. A dry-sump pulley application is not a complete dry-sump oil system. Match the installed engine and build rather than extending JZ or B58 naming across generations. Intake and Interior Applications A naturally aspirated Supra intake needs the exact engine/year, sensor and airbox arrangement. Do not assume it supports a turbo installation or a different engine swap. Gauge pods require correct production, steering position, mounting geometry and gauge-opening size. Review whether gauges/sensors are included or supplied separately. Choose Your Part Identify generation and actual engine/build. Mat...