Drive Shaft Shop 610270 aluminum driveshaft installed on 2016 Ford Mustang GT
Click to zoom in

DSS Ford 15-17 Mustang GT 6-Speed Manual 1-Piece 3.5in Aluminum Shaft w/ CV 900HP FDSH55-A

DSS610270
FDSH55-A
Driveshafts
5 Units In Stock - Ships Next Business Day
$ 997.71
$ 997.71

SKU: 610270   |   UPC: FDSH55-A

Drive Shaft Shop 2015–2017 Ford Mustang GT 6-Speed Manual 1-Piece 3.5in Aluminum Shaft w/ CV 900HP

The Drive Shaft Shop 1-Piece 3.5in Aluminum Shaft with CV is a dynamic upgrade for 2015–2017 Ford Mustang GT 6-speed manual models, engineered to harness torque up to 900 HP while trimming weight and vibrations for lightning-fast launches and surgical handling. Fashioned from resilient 6061-T6 aluminum tubing with meticulously balanced CV joints for impeccable power propagation, this seamless shaft outclasses OEM setups by eradicating flex and critical speed woes, boasting over 7,500 RPM stability. As a direct bolt-on replacement, it ignites sharper rev-matching, elevates balance, and fortifies tenacity, imperative for Coyote-powered Mustangs in quarter-mile sprints, road courses, or canyon assaults where featherweight fortitude converges with indomitable drive.

Key Features

  • 6061-T6 Aluminum Tubing: 3.5in diameter for airy fortitude and slashed rotational heft.
  • Integrated CV Joints: High-angle greasable CVs for fluid motion up to 30 degrees without binding.
  • Precision Balanced: Vibration-nullified across the spectrum for serene high-speed cruises.
  • 900 HP Torque Rating: Forged for supercharged or naturally aspirated Coyote conquests.
  • One-Piece Architecture: Sidesteps OEM two-piece pitfalls for effortless, upkeep-free drivetrain.
  • Limited Lifetime Warranty: Against defects with proper installation.

What's Included

  • (1) 3.5in Aluminum Driveshaft with CV Joints
  • (2) CV Yokes
  • Greasable Zerk Fittings
  • Complete Hardware Kit (bolts, straps, U-bolts)
  • Installation Instructions

Product Notes

  • Crafted for 6-speed manual transmissions not for automatics or MT82 swaps.
  • Compatible with stock differentials bolster CVs for ultra-high power.
  • Professional balancing vital for custom lengths.
  • Maintenance: Grease CV joints every 5,000 miles inspect yearly.

Installation Notes

  • Bolt-on replacement typically 1-2 hours with transmission support.
  • Professional installation recommended for phasing and balance.
  • Mark OEM phasing, remove old shaft, install new, torque to spec (70-90 ft-lbs), test drive.

This Part Fits

Year Make Model Submodel
2015–2017 Ford Mustang GT 5.0L V8 6-Speed Manual

Why Choose Drive Shaft Shop?

  • Industry leader in custom driveshafts since 1989, igniting NHRA and SEMA triumphs.
  • Aluminum and CV prowess for Mustang muscle with vibration-free mastery.
  • Lifetime support for GT builds with elite engineering.

Frequently Asked Questions

  • Q: What's the HP rating?
  • A: Up to 900 HP, primed for tuned Coyote engines.
  • Q: Includes yokes?
  • A: Yes, CV yokes for direct OEM compatibility.
  • Q: Greasing required?
  • A: Yes, every 5,000 miles for CV joint longevity.

Shipping & Handling

  • Method: Ground freight delivery only due to length.
  • Availability: Usually ships same day or next if in stock.
  • Packaging: Crated with protective ends to avert damage.

Request For Information

Have questions about DSS Ford 15-17 Mustang GT 6-Speed Manual 1-Piece 3.5in Aluminum Shaft w/ CV 900HP FDSH55-A? Fill out the form below and we'll get back to you by the next business day.
Driveshaft Shop

Driveshaft Shop

Driveshaft Shop parts and accessories Driveshaft Shop aluminum and carbon fiber driveshafts, half shafts and performance axles for Mustang, Camaro, Corvette, GT-R, WRX STI, Civic, 350Z and Silverado builds are stocked at Black Ops Auto Works. Shop one piece shafts, Level 5 axles, Pro Level axles, hubs, CV assemblies and driveline upgrades for high horsepower street, drag and track vehicles. The Driveshaft Shop develops stronger driveline components for domestic, import, AWD, RWD and truck platforms. This collection carries 168 DSS SKUs across aluminum, carbon fiber and chromoly driveshafts, axle sets, half shafts, CV assemblies, hub kits and high horsepower driveline hardware. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. What Driveshaft Shop Covers DSS upgrades the parts that carry power from the transmission and differential to the wheels. Product selection is vehicle specific, with flange, transmission,...

View Driveshaft Shop Products
Driveshafts

Driveshafts

Performance driveshafts and driveline upgrades give Mustang, Camaro, Corvette, Silverado, F-150, Ram TRX, Jeep and LS swap builds a stronger connection between the transmission and differential. Shop aluminum, carbon fiber, chromoly, 1-piece, 2-piece, CV, front and rear driveshafts, plus U-joints, pinion shims and carrier-bearing hardware. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct driveline part ships the first time. Black Ops Auto Works carries 134 driveshaft SKUs for street, drag, track, truck, Jeep and high-horsepower applications. What This Driveshafts Collection Covers This collection covers direct-fit replacement and performance shafts for RWD, AWD and 4WD layouts. Material, tube diameter, joint style, flange pattern, transmission, differential and wheelbase all matter when selecting a shaft. Driveshaft Materials and Construction Aluminum, Carbon Fiber and Chromoly Aluminum shafts reduce rotating weight for responsive stre...

View Driveshafts Products
Driveshafts & Loops

Driveshafts & Loops

Driveshafts and Driveshaft Loops are stocked at Black Ops Auto Works for Mustang, Camaro, Corvette, Challenger, Charger, Jeep SRT, Trackhawk, Silverado, Ram TRX, F-150, Subaru, Toyota, Audi, and Porsche builds. Shop one-piece aluminum driveshafts, carbon fiber driveshafts, chromoly driveshafts, front shafts, rear shafts, dual CV shafts, driveshaft loops, carrier bearing upgrades, universal joints, pinion shims, and driveline hardware for the correct vehicle and build goal. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 162 Driveshafts and Driveshaft Loops SKUs across driveline materials, shaft layouts, axle connections, safety hardware, and power levels. What This Driveshaft and Loop Collection Covers Performance shafts and safety hardware This collection brings together replacement and performance driveshafts, safety loops, carrier bearing supports, U-joints, pinion shims, and...

View Driveshafts & Loops Products
Drivetrain

Drivetrain

Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...

View Drivetrain Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×