Click to zoom in
Low-Profile Overland Roof Rack Built for the 6th Generation Toyota 4Runner with Full T-Slot Mounting Flexibility
The DV8 Offroad DVERRTF3-02 is the Spec Series Roof Rack engineered specifically for the 2025-2026 Toyota 4Runner. This full-length aluminum roof rack features ten 80/20 T-slot crossbars using M6 T-nuts, delivering nearly unlimited mounting configurations for tie-downs, gear boxes, storage systems, and accessories. The DVERRTF3-02 rides at an ultra-low profile that works with sunroof-equipped 4Runner models without modification, and uses steel mounting feet that distribute roof loads evenly across the vehicle mounting points. Side slots run the full length of the sidewalls for scene lighting, awnings, and recovery equipment, while the rear crossmember accommodates up to a 40-inch light bar. The angular wind deflector is engineered to follow the 4Runner roofline and outperform competitor rounded deflectors for reduced wind noise. The optional Light Cutout Front Fairing (RRTF3-02L, sold separately) further expands forward lighting capabilities.
Key Features
- DVERRTF3-02 aluminum Spec Series Roof Rack designed for the 2025-2026 Toyota 4Runner with an ultra-low-profile fit that clears sunroof-equipped models
- Ten 80/20 T-slot crossbars using M6 T-nuts for virtually unlimited tie-down, gear, and accessory mounting configurations
- M6 slots along the top and rear for additional mounting points and tie-down applications
- Full-length side slots along both sidewalls for scene lights, awnings, and recovery tools
- Rear crossmember supports up to a 40-inch light bar for camp setup and trail reversing illumination
- Removable rear styling fins for flush mounting of awnings and large rooftop tents
- Angular wind deflector matched to the 4Runner roofline for lower wind noise vs competitor rounded designs
- 90-degree sidewall bend adds structural rigidity and integrates mounting slots along the full rack length
- Steel mounting feet distribute weight evenly across roof mounting points for tent, storage box, and heavy gear applications
- Lightweight aluminum side plates, crossbars, and rear structure with gloss black steel accent plate
- Micro-Texture Black Powder Coat finish with Gloss Black accents
- Bolt-on installation, no cutting required. Compatible with optional Light Cutout Front Fairing (RRTF3-02L, sold separately)
Fitment
| Year Range | Make | Model |
|---|---|---|
| 2025-2026 | Toyota | 4Runner |
Specifications
| Detail | Value |
|---|---|
| Part Number (MPN) | RRTF3-02 |
| SKU | DVERRTF3-02 |
| UPC | 810087816636 |
| Brand | DV8 Offroad |
| Material | Aluminum (side plates, crossbars, rear structure); Steel (mounting feet, accent panels) |
| Finish | Micro-Texture Black Powder Coat; Gloss Black accents |
| Crossbars | 10 x 80/20 T-slot (M6 T-nut compatible) |
| Max Rear Light Bar | 40 inches |
| Weight | 86 lbs |
| Installation | Bolt-on, no cutting required |
| Install Time | Approximately 4 to 6 hours |
| Sunroof Compatible | Yes |
| Optional Accessory | Light Cutout Front Fairing (RRTF3-02L, sold separately) |
| Prop 65 | No |
What's Included
- One (1) DVERRTF3-02 Spec Series Roof Rack assembly
- Ten (10) 80/20 T-slot crossbars
- Steel mounting feet
- Removable rear styling fins
- Angular wind deflector
- All mounting hardware
About DV8 Offroad
DV8 Offroad is a Utah-based off-road and overland accessories manufacturer focused on Jeep, Ford Bronco, and Toyota platforms. Known for engineering-driven product development and in-house testing, DV8 produces bumpers, roof racks, skid plates, fender flares, and lighting that are designed for direct OEM fitment with no cutting or welding required. The Spec Series Roof Rack lineup is developed with overland enthusiasts who prioritize low-profile aesthetics and maximum configurability without sacrificing structural load capacity.
Frequently Asked Questions
What is the DV8 DVERRTF3-02?The DVERRTF3-02 is the DV8 Offroad Spec Series Roof Rack for the 2025 and 2026 Toyota 4Runner. It is a full-length aluminum roof rack with ten 80/20 T-slot crossbars, full-length side slots, a rear light bar mounting position, removable styling fins, and an angular wind deflector. Bolt-on installation with no cutting required. Approximately 86 lbs and compatible with sunroof-equipped 4Runner models.
Does the DVERRTF3-02 fit 4Runner models with a sunroof?Yes. The DVERRTF3-02 uses an ultra-low-profile design that clears the sunroof opening on equipped 4Runner models without modification or relocation of the sunroof mechanism.
What crossbar system does the DVERRTF3-02 use?The DVERRTF3-02 uses ten 80/20 profile T-slot crossbars that accept standard M6 T-nuts. This system allows mounting of aftermarket tie-downs, cargo accessories, lighting brackets, and gear organizers from nearly any manufacturer that supports M6 T-nut mounting.
Can I mount a rooftop tent on the DVERRTF3-02?Yes. The DVERRTF3-02 uses steel mounting feet that distribute load evenly across the 4Runner roof mounting points and is designed to support rooftop tents, storage boxes, and heavy overland gear. Always verify your specific rooftop tent mounting dimensions against the rack crossbar spacing and confirm your vehicle's roof load capacity per the owners manual before loading.
What size light bar can I mount on the rear crossmember of the DVERRTF3-02?The rear crossmember of the DVERRTF3-02 includes integrated mounting slots that accept a light bar up to 40 inches wide, providing illumination for camp setups or reversing on the trail.
Is the optional Light Cutout Front Fairing included with the DVERRTF3-02?No. The Light Cutout Front Fairing (MPN RRTF3-02L) is sold separately and is compatible exclusively with the DVERRTF3-02 Spec Series Roof Rack. The fairing supports a 40-inch straight light bar, dual 20-inch single-row bars, or up to ten 3-inch pod lights.
How long does it take to install the DVERRTF3-02?DV8 estimates approximately 4 to 6 hours total for the DVERRTF3-02, broken into roughly 3 hours of rack assembly and 1 to 3 hours for vehicle installation. Install time varies based on experience level and whether optional accessories are being added simultaneously.
What finish does the DVERRTF3-02 use?The aluminum structural components of the DVERRTF3-02 are finished in Micro-Texture Black Powder Coat. The steel mounting feet and accent panels use a Gloss Black finish. Both finishes are designed for durability in off-road and overland environments.
Does the DVERRTF3-02 require drilling or cutting the 4Runner body?No. The DVERRTF3-02 is a bolt-on installation that uses the factory roof mounting locations on the 2025-2026 Toyota 4Runner. No cutting, drilling, or permanent modification to the body is required.
Installation Instructions
- Lay out all DVERRTF3-02 components and hardware and verify against the included parts list before beginning
- Assemble the rack frame on the ground per the DV8 installation guide, connecting the crossbars to the side plates and rear structure
- Install M6 T-nuts into the crossbar slots at planned mounting positions for accessories before raising the rack to the roof
- With a second person, carefully raise the assembled DVERRTF3-02 to the 4Runner roofline and align the steel mounting feet with the factory roof mounting points
- Thread the factory-style mounting bolts through the steel feet and into the roof mounting locations and hand-tighten
- Once all mounting feet are seated, torque all bolts to spec per the DV8 installation guide
- Attach the angular wind deflector to the front of the rack assembly and secure per the installation guide
- Install removable rear styling fins if desired, or leave removed for flush awning or tent mounting
- Mount any accessories using the M6 T-nut system in the crossbars and sidewall slots
- If adding the optional RRTF3-02L Light Cutout Front Fairing, follow the fairing installation guide for that accessory
- Inspect all fasteners and confirm secure before loading gear or driving
DV8 Offroad
DV8 Offroad parts for Jeep, Ford Bronco, Toyota, and off road trucks are stocked at Black Ops Auto Works. Shop front and rear bumpers, skid plates, rock sliders, roof racks, MOLLE panels, tire carriers, winches, and light mounts for Jeep Wrangler, Jeep Gladiator, Ford Bronco, Toyota Tacoma, Toyota 4Runner, Toyota Tundra, and RAM applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 281 DV8 Offroad SKUs across bumpers, armor, storage, and recovery categories. What This Brand Covers DV8 Offroad builds trail armor and accessories aimed primarily at the Jeep Wrangler and Gladiator platforms, along with growing support for the Ford Bronco and Toyota Tacoma, 4Runner, and Land Cruiser. The lineup covers bumpers, skid plates, rock sliders, storage panels, roof racks, and recovery equipment built for aggressive off road styling and trail durability. Platforms Covered Jeep Wrangle...
View DV8 Offroad Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Roof Rack
Roof racks add organized cargo capacity for Jeep Wrangler, Gladiator, Toyota 4Runner, Tacoma, Land Cruiser, Ford Bronco, F-150, Super Duty, Silverado, Sierra and SUV overland builds. Shop full-length platforms, cross bars, low-profile racks, track systems, rack mounts, awning mounts, light mounts, recovery gear mounts, cargo baskets and replacement hardware. Every product is filterable by year, make, model, trim, roof style, cab configuration and factory rail layout so the correct rack ships the first time. Black Ops Auto Works carries 192 roof rack SKUs across platform size, mounting system, cargo capacity, lighting integration and outdoor gear compatibility. What a Roof Rack Can Carry Build capacity without crowding the cabin A vehicle-specific roof rack creates a stable mounting point for recovery boards, roof tents, fuel containers, camp boxes, bikes, kayaks, awnings and work equipment. Modular platforms make it easier to position gear for the cargo mix used on each trip. Pl...
View Roof Rack Products
Roof Racks & Truck Racks
Roof racks and truck racks for Jeeps, trucks, and SUVs are stocked at Black Ops Auto Works. Shop roof racks, headache racks, bed racks, ladder racks, hitch racks, bike racks, water sport and winter sport racks, and spare tire carriers for Jeep Wrangler and Gladiator, Toyota Tacoma and 4Runner and Land Cruiser, Ford Super Duty and Bronco, Chevrolet Silverado and Colorado, GMC Sierra and Canyon, and Nissan Frontier. Every product is filterable by year, make, model, trim, and drivetrain so the correct rack and mounting hardware ship the first time. Black Ops Auto Works carries 322 roof rack and truck rack SKUs from Westin, DV8 Offroad, KC HiLiTES, BackRack, and other leading brands. What This Category Covers This category covers rack systems that add cargo capacity and mounting points on top of a Jeep, truck, or SUV, from full-size roof racks and bed racks to specialty racks for tools, spare tires, and recreational gear. Rack choice depends heavily on the specific vehicle body styl...
View Roof Racks & Truck Racks Products