DV8 Offroad 2024-2025 Toyota Tacoma Double Cab Roof Rack

The 2024-2025 Toyota Tacoma Double Cab Roof Rack Built for Everything You Bring on the Trail

The DVERRTT1-04 DV8 Offroad Spec Series Roof Rack is engineered exclusively for the 2024-2025 Toyota Tacoma Double Cab, giving Tacoma owners a purpose-built overhead platform that handles overland gear, rooftop tents, lighting, and recovery equipment without compromise. Six 80/20 aluminum crossbars with M6 T-slot channels let you position mounts anywhere along the rack without drilling. Removable rear fins allow flush mounting of large rooftop tent or awning solutions. Steel mounting feet keep the rack solid under load, while the ultra low-profile and angular wind deflector keep highway noise to a minimum. Rock light side slot mounts run the entire length of the rack, the rear slot supports backup lights, and the rear crossbar accepts a 40-inch light bar for maximum trail visibility. Finished in micro-texture black powder coat with gloss black steel accent panels, the DVERRTT1-04 is compatible with the optional DVERRTT1-04L front light mount sold separately. Double Cab fitment only. Will not fit Access Cab models. Sunroof-equipped models require one less crossbar.

Key Features

• DVERRTT1-04 engineered exclusively for the 2024-2025 Toyota Tacoma Double Cab with bolt-on installation, no drilling or cutting required
• Six 80/20 aluminum crossbars with M6 T-slot channels for tool-free accessory positioning anywhere along the rack
• Removable rear fins for flush mounting of rooftop tents and large overland accessories
• Ultra low-profile design reduces wind drag and keeps roofline clean
• Angular wind deflector minimizes cabin noise at highway speed
• Steel mounting feet for maximum rigidity under load
• Rock light side slot mounts along the full length of the DVERRTT1-04
• Rear slot mounts for backup lights
• Rear crossbar compatible with a 40-inch light bar
• Compatible with optional DVERRTT1-04L front light mount for two 20-inch bars, one 40-inch bar, or ten 3-inch pods (sold separately)
• Micro-texture black powder coat with gloss black steel accent panels

Fitment

Specifications

What's Included

• One (1) DVERRTT1-04 Spec Series Roof Rack assembly
• Six (6) 80/20 crossbars with M6 T-nuts
• Steel mounting feet
• Angular wind deflector
• Removable rear fins
• Gloss black steel accent panels
• All mounting hardware

About DV8 Offroad

DV8 Offroad is a Utah-based off-road and overland accessories manufacturer focused on Jeep, Ford Bronco, and Toyota platforms. Known for engineering-driven product development and in-house testing, DV8 produces bumpers, roof racks, skid plates, fender flares, and lighting that are designed for direct OEM fitment with no cutting or welding required. The Spec Series Roof Rack lineup is developed with overland enthusiasts who prioritize low-profile aesthetics and maximum configurability without sacrificing structural load capacity.

Frequently Asked Questions

The DVERRTT1-04 is the DV8 Offroad Spec Series Roof Rack designed specifically for the 2024-2025 Toyota Tacoma Double Cab. It features six 80/20 aluminum crossbars with M6 T-slot channels, a low-profile design with angular wind deflector, steel mounting feet, rock light side slot mounts, rear backup light slots, and a rear crossbar that accepts a 40-inch light bar.

No. The DVERRTT1-04 is engineered exclusively for the 2024-2025 Toyota Tacoma Double Cab configuration. It will not fit Access Cab models.

The rear crossbar of the DVERRTT1-04 accommodates a 40-inch light bar. With the optional DVERRTT1-04L front light mount (sold separately), you can additionally run two 20-inch single-row bars, one 40-inch bar, or up to ten 3-inch pod lights across the front of the rack.

Yes. The DVERRTT1-04 features rock light side slot mounts that run the full length of the rack, giving flexible LED rock light positioning along both sides.

No. The DVERRTT1-04 is a fully bolt-on installation using factory mounting points on the 2024-2025 Toyota Tacoma Double Cab. No drilling or cutting is required.

Yes. The DVERRTT1-04 steel mounting feet and removable rear fins are designed to accommodate rooftop tents and large overland accessories. Always verify your vehicle's roof load capacity per the owners manual before mounting a tent or heavy gear above the roofline.

The DVERRTT1-04 is finished in a micro-texture black powder coat with gloss black steel accent panels, providing corrosion resistance and a clean, rugged aesthetic that complements the Tacoma roofline.

Yes, with a minor adjustment. Sunroof-equipped 4th Gen Tacoma models will need to run one fewer crossbar to clear the sunroof in the tilt position. All other functions remain the same.

No. The DVERRTT1-04 is designed for the fourth-generation 2024-2025 Toyota Tacoma Double Cab. For the third-generation 2016-2023 Tacoma, DV8 Offroad offers the RRTT1-01 Roof Rack separately.

Installation Instructions

1. Clean the roof mounting surfaces on the 2024-2025 Toyota Tacoma Double Cab and identify factory roof mount points
2. Dry-fit the DVERRTT1-04 steel mounting feet to verify alignment with factory mounting points before torquing
3. Position the rack assembly and finger-tighten all mounting hardware evenly
4. Confirm the angular wind deflector is properly seated at the front and the rack is level side to side
5. Torque all mounting bolts to specification per the DVERRTT1-04 instruction sheet
6. Install the six 80/20 crossbars and position M6 T-nuts at desired accessory mounting locations before sliding crossbars fully into the side rails
7. Install removable rear fins or leave removed for flush tent or awning mounting as desired
8. If installing the optional DVERRTT1-04L front light mount, follow the separate instruction sheet for that accessory
9. Perform a final torque check on all fasteners after the first drive before loading gear

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.