Click to zoom in
Consistent street tuning with simple metering-rod service
Edelbrock 1411 is a universal 750 CFM square-flange four-barrel carburetor for compatible gasoline street-engine combinations. Its two-piece aluminum body, rear-pivot floats, and metering-rod fuel control are designed to hold a stable tune while allowing calibration changes without removing the carburetor.
Key Features
- 750 CFM airflow rating for compatible street-engine combinations
- Electric choke supports dependable cold starts after correct wiring and adjustment
- Metering rods transition between circuits without a power valve that can be damaged by a backfire
- Two-piece aluminum body resists warping and reduces weight
- Rear-pivot floats and tub-style fuel bowls simplify tuning and service
- Calibrated for fuel economy in compatible applications
Fitment
| Application | Verified Requirement | Exclusions |
|---|---|---|
| Universal, engine-system specific | Compatible gasoline engine with a square-bore intake flange, suitable 750 CFM demand, correct fuel pressure, throttle linkage, kickdown geometry, air-cleaner clearance, and electric-choke wiring | Not for RPM or Torker II intake manifolds. Not compatible with alcohol, race fuel, or E85. Not marine approved. |
| Ford AOD transmission | Use Lokar bracket SRK-4000 and verify complete throttle and transmission linkage travel | No year-make-model fitment applies by itself |
Specifications
| Detail | Value |
|---|---|
| Series | Performer |
| Airflow | 750 CFM |
| Barrels | 4 |
| Flange | Square bore |
| Choke | Electric |
| Material | Aluminum |
| Finish | Satin |
| Body Height | 3.25 inches |
| Primary Bore | 1.69 inches |
| Secondary Bore | 1.69 inches |
| Main Venturi | 1.44 inches |
| Primary Jet | 0.110 inch |
| Secondary Jet | 0.107 inch |
| Metering Rod | 0.075 x 0.047 inch |
| Step-Up Spring | 5 in Hg, orange |
| UPC | 0 85347 014 118 |
| Warranty | 3 months |
What's Included
- One Edelbrock Performer 750 CFM electric-choke carburetor
- Carburetor base gasket and verified small installation hardware
- Electric-choke wiring leads
- Owner's and tuning documentation
- Intake manifold, air cleaner, fuel line, application-specific linkage brackets, and unrelated installation parts are not included unless shown in the exact package received
About Edelbrock
Edelbrock develops automotive induction, cylinder-head, valvetrain, fuel-delivery, and engine-control components for street and performance applications. Performer carburetors emphasize repeatable calibration, serviceable fuel circuits, and broad compatibility when the complete engine and vehicle system is matched correctly.
Related Parts
- A new fuel filter installed between the fuel pump and carburetor
- Square-bore intake manifold matched to the engine and operating range
- Throttle, kickdown, and transmission linkage hardware matched to the vehicle
- Air cleaner with verified flange, hood clearance, and filtration capacity
FAQ
What is the 1411?It is a universal Edelbrock Performer four-barrel carburetor rated at 750 CFM, with a square-bore flange, electric choke, satin finish, and street-oriented calibration.
Does it fit a vehicle by year and model alone?No. Compatibility depends on the engine's airflow demand, intake flange, fuel system, linkage, transmission controls, air-cleaner clearance, emissions requirements, and intended fuel.
Can it be used with E85 or alcohol fuel?No. Edelbrock states that alcohol, race fuel, and E85 are incompatible and can damage the carburetor and other fuel-system parts.
Is it recommended for an RPM or Torker II intake?No. Edelbrock specifically excludes RPM and Torker II intake manifolds for this carburetor.
Is a fuel filter required?Yes. A new fuel filter must be installed between the fuel pump and carburetor to protect the fuel system and preserve warranty coverage.
Can it work with a Ford AOD transmission?Yes, when the Lokar SRK-4000 bracket is used and the throttle and transmission linkage geometry is verified through its full travel.
Is this carburetor marine approved?No. The manufacturer identifies it as an automotive universal carburetor and states that it is not marine approved.
What must be checked after installation?Check fuel pressure, leaks, float operation, choke adjustment, idle speed, idle mixture, throttle travel, transmission linkage, air-cleaner clearance, and final calibration under safe operating conditions.
Installation Instructions
- Confirm the package label identifies Edelbrock 1411 and inspect the carburetor and included parts for shipping damage.
- Verify the engine, intake flange, fuel pressure, fuel type, throttle linkage, kickdown or transmission linkage, emissions rules, and air-cleaner clearance before installation.
- Disconnect the battery, work on a cool engine, relieve fuel pressure, and follow fire-safe fuel-system procedures.
- Remove the existing carburetor, clean the intake flange without allowing debris into the engine, and inspect all mounting and vacuum surfaces.
- Install a new fuel filter between the pump and carburetor, then mount the carburetor with the correct gasket and fastener procedure.
- Connect the fuel line, vacuum ports, throttle linkage, transmission controls, return springs, and electric choke according to the engine and vehicle service requirements.
- Verify full throttle travel, positive return to idle, correct kickdown or TV operation, and clearance around every moving component before starting the engine.
- Start the engine, inspect for leaks, set choke and idle controls, and tune with appropriate instruments while following Edelbrock's current manual.
California Proposition 65 Warning: This product can expose you to zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. See www.P65Warnings.ca.gov.
Carburetors
Shop carburetors, carburetor rebuild kits, adapters, choke components, calibration parts, gaskets, and installation hardware at Black Ops Auto Works. Find carburetor solutions for V8 street builds, classic cars, Jeep CJ models, Willys vehicles, trucks, off-road applications, and other carbureted engines. Performance Carburetors for Street and V8 Builds Compare Edelbrock Performer 500, 600 and 750 CFM references with listed AVS2/Thunder choices. Performer and AVS2 packages have their own calibration, choke and flange specifications. AVS2 annular primary boosters are designed to improve fuel metering during off-idle and cruising transitions; select the exact model around the complete engine combination.The AVS2 1905 is a 650 CFM manual-choke reference; the listed electric-choke version is a separate selection. Edelbrock states that manual-choke AVS2 carburetors cannot be converted to electric choke, so choose the intended choke configuration before ordering. Jeep, Willys, and Classic ...
View Carburetors Products
Edelbrock
Shop Edelbrock intake manifolds, carburetors, fuel-injection systems and engine components at Black Ops Auto Works. Explore Performer and Performer RPM choices alongside cylinder heads, valve covers, cooling parts and application-specific supercharger references. Build a compatible combination around the engine and the driving range you want to use.Performer and Performer RPM Intake ChoicesEdelbrock describes Performer manifolds as street-oriented low-rise dual-plane designs, while Performer RPM targets a higher operating range with a high-rise dual-plane layout. Start with how the engine will be used, then match the exact manifold’s head ports, carburetor or EFI arrangement, accessory provisions and clearance. Air-Gap, Victor and other references have their own engine and installation requirements.Carburetors and Fuel-Injection ProjectsCompare the listed Performer 500 CFM electric-choke reference with Thunder-series carburetors and their separate airflow and choke arrangements. Pro...
View Edelbrock Products
Engine
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products
Fuel Delivery
Shop performance fuel delivery parts for gasoline, diesel, EFI, carbureted, boosted, and flex-fuel builds at Black Ops Auto Works. This collection brings together fuel pumps, pump modules, rails, pressure regulators, filters, tanks, surge tanks, carburetors, flex-fuel kits, sensors, injection-pump components, and installation hardware for street, towing, off-road, and motorsport applications. Choose vehicle-specific and universal components from trusted manufacturers including Aeromotive, DeatschWerks, Radium Engineering, Walbro, Fleece Performance, Fuelab, Injector Dynamics, COBB, Turbosmart, AEM, Titan Fuel Tanks, Edelbrock, and more. Always verify the exact year, make, model, engine, fuel type, pressure requirements, and connection sizes before ordering. Fuel Pumps and Pump Modules Replace a weak factory pump or build a higher-capacity fuel system with in-tank pumps, external pumps, brushless pumps, complete modules, hangers, controllers, and fitment kits. Pump selection should...
View Fuel Delivery Products