-10%
Click to zoom in
Add large-body damping and adjustable lift for mixed road and trail use
Eibach E83-35-059-01-22 pairs 2.5-inch front coilovers with 2.5-inch remote-reservoir rear shocks for the verified F-150 SuperCrew 4WD applications below.
Key Features
- E83-35-059-01-22 Stage 3R matched front and rear suspension system
- Height-adjustable 2.5-inch front coilovers
- Extended-travel 2.5-inch rear reservoir shocks
- 56 mm monotube piston design
- Nitrogen-filled multi-stage damping
- 6061-T6 billet aluminum coilover mounts
- Individually dyno tested
- Made in the USA with a two-year warranty
Fitment
| Years | Make or Application | Model or Dimensions | Verified Notes and Exclusions |
|---|---|---|---|
| 2015-2020 | Ford | F-150 SuperCrew 4WD | 2.7L EcoBoost, 3.5L EcoBoost, or 5.0L; +1 to 3 inches front and +0 to 2 inches rear |
| 2021-2026 | Ford | F-150 SuperCrew 4WD | 2.7L EcoBoost, 3.5L EcoBoost, 3.5L PowerBoost Hybrid, or 5.0L; excludes CCD electronic suspension |
| 2021-2026 | Ford | F-150 Tremor SuperCrew 4WD | 3.5L EcoBoost or 5.0L; excludes CCD electronic suspension; manufacturer application may specify a reduced front-height range |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | E83-35-059-01-22 |
| Series | PRO-TRUCK-LIFT Stage 3R |
| Front | Pair of 2.5-inch adjustable coilovers |
| Rear | Pair of 2.5-inch remote-reservoir shocks |
| Standard Front Height Range | +1 to 3 inches |
| Rear Height Range | +0 to 2 inches |
| Piston | 56 mm monotube |
| Mounts | Anodized 6061-T6 billet aluminum |
| Warranty | Two years under Eibach terms |
What's Included
- One E83-35-059-01-22 Stage 3R system
- Two front coilover assemblies
- Two rear remote-reservoir shocks
- Application hardware supplied by Eibach
- Wheels, tires, upper control arms, alignment parts, and installation tools are not included
About Eibach
Eibach develops springs and dampers for street, truck, and motorsport applications. Stage 3R combines adjustable large-body front coilovers with reservoir rear dampers to increase heat capacity and control on rough terrain.
Related Parts
- Alignment hardware required by the measured post-installation geometry
- Wheels and tires verified for clearance through full travel
- Brake-line and sensor-routing service parts when inspection requires them
FAQ
What is the E83-35-059-01-22?It is Eibach's Stage 3R front-coilover and rear-reservoir-shock package for the verified F-150 SuperCrew 4WD applications.
Does it fit two-wheel-drive trucks?No. The manufacturer application list is limited to the verified four-wheel-drive configurations.
Does it fit trucks with CCD electronic suspension?No. Eibach excludes 2021-2026 trucks equipped with CCD electronic suspension.
Which engines are supported?The exact application list covers 2.7L EcoBoost, 3.5L EcoBoost, 3.5L PowerBoost Hybrid, and 5.0L configurations as detailed in the Fitment table.
How much front lift is available?Most listed applications show one to three inches; the Tremor application can carry a reduced manufacturer-listed range.
What is included at the rear?A matched pair of 2.5-inch extended-travel remote-reservoir shocks is included.
Is an alignment required?Yes. Measure and correct alignment after installation and verify tire, brake-line, sensor, and suspension clearances.
What warranty applies?Eibach lists a two-year warranty against qualifying defects under its current terms.
Installation Instructions
- Confirm the package identifies E83-35-059-01-22 and verify the exact year, SuperCrew body, engine, 4WD drivetrain, Tremor status, and CCD exclusion.
- Record ride height and alignment values before disassembly.
- Support the truck at approved lift points and follow Eibach's current D4430 and D4431 instructions.
- Install both front coilovers without exceeding the manufacturer height range for the verified application.
- Mount the rear reservoir shocks and route reservoirs and hoses away from heat, abrasion, and moving parts.
- Torque all fasteners at the specified suspension position and verify brake-line, sensor, tire, and body clearance.
- Perform a professional alignment and recalibrate driver-assistance or headlamp systems when required.
- Recheck torque, hose routing, ride height, and clearances after the first road and trail heat cycles.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Eibach
Shop Eibach suspension and wheel-spacing components at Black Ops Auto Works. Compare PRO-KIT lowering springs, anti-roll bars, PRO-TRUCK lift and shock references, alignment pieces and PRO-SPACER applications. Choose a focused ride-height, handling or service project around the vehicle’s actual suspension and current equipment.PRO-KIT Springs and Anti-Roll BarsThe lowering-spring selection distinguishes vehicle, drivetrain and trim, including separate Grand Cherokee SRT and Trackhawk references and a BMW M4 front-spring pair. Compare the exact package’s coverage and stated change with current dampers and factory suspension. Anti-roll-bar kits, individual bars and end links are different purchases; match axle position, package scope and the intended handling plan.PRO-TRUCK Lift and Shock ChoicesLift references include springs, individual shocks, assembled front units and Stage systems for separate truck applications. Eibach describes Stage 2 as adding front adjustability compared wit...
View Eibach Products
Suspension
Shop suspension parts and kits for maintenance, ride-height changes and a coordinated handling setup. Compare springs, coilovers, dampers, control arms, sway bars, links and service components for the actual vehicle and its factory equipment. Start with the driving goal, then choose a compatible system and the parts needed to complete it.Springs, Coilovers and DampersLowering springs change the spring specification while retaining a compatible damper arrangement. A coilover package can combine springs and adjustable damper hardware, while a shock-and-spring service kit may supply complete corner assemblies. Compare the exact contents and adjustments for each reference.Swift, Eibach and Silver’s options appear alongside application-specific service and upgrade components. Choose the intended ride height, use and retained factory equipment, then review spring/damper compatibility, available travel and clearance.Arms, Links and Roll ControlControl arms and toe links locate the wheel an...
View Suspension Products
Suspension Packages
Compare suspension packages for street handling, a ride-height change or a coordinated truck setup. Shop Black Ops Killshot and AAD arm packages alongside Eibach, Bilstein, QA1, Ridetech, H&R and other listed systems. Choose the goal first, then compare the exact assemblies, axle coverage and adjustments supplied.Black Ops and AAD PackagesKillshot references combine specified components for Jeep Grand Cherokee and Dodge Durango applications. Compare stage and selected vehicle option: arm-and-link packages differ from versions adding springs, braces or other supporting parts.Trackhawk and Durango Hellcat stage references have their own configuration. AAD Wheel Hop Eliminator and Blood Red packages also have distinct arm/link contents. A higher stage or a package name does not establish identical coverage across all trims.Street Handling and Ride-Height SystemsEibach PRO-PLUS combines specified springs and sway bars rather than automatically supplying replacement dampers. Compare ...
View Suspension Packages Products