This EVIQO Level 2 home EV charger supplies 9.6 kW through a NACS vehicle connector and a nema 14-50 plug-in electrical connection. Its 25-foot charging cable, Wi-Fi controls, weather-resistant enclosure, and three-year standard warranty support everyday indoor or outdoor charging when the electrical supply and vehicle inlet are compatible.
Key Features
- This plug-in model works with a standard NEMA 14-50 outlet (40A or 50A circuit rating) and provides approximately 38 miles per hour.
- UL/ETL/FCC/Energy Star certified and built into an IP66/NEMA-4 weatherproof enclosure, so this electric car charger level 2 stands up to rain, snow, heat and dust.
- Mainboard steel shielding protects the internals of the charger for long term use.
- The NACS connector also allows you to open the Tesla charging port using the built-in button.
- High-visibility fluorescent holster makes plug-in and storage easy even in low-light conditions.
- Schedule charging during off-peak night hours in the app to reduce energy costs.
Fitment
Compatible with North American EVs and plug-in hybrids that use the NACS inlet, or a manufacturer-approved adapter rated for the vehicle and charger. Do not assign year-make-model fitment because charging-port configuration can vary by model year and vehicle.
Specifications
| Brand |
EVIQO |
| Manufacturer SKU |
NACS_40AMP_PLUG-IN |
| Charger Level |
Level 2 |
| Input Voltage |
240V AC |
| Vehicle Connector |
NACS |
| Electrical Connection |
NEMA 14-50 plug-in |
| Maximum Output |
40A |
| Rated Power |
9.6 kW |
| Circuit Requirement |
Dedicated 40A or 50A circuit with a correctly installed NEMA 14-50 receptacle |
| Charging Cable |
25 ft |
| Network |
2.4 GHz Wi-Fi for smart features |
| Enclosure |
IP66 / NEMA 4 weather-resistant |
| Standard Warranty |
3 years |
| Condition |
New |
What's Included
One EVIQO charger, attached charging cable and connector, connector holster, charger wall bracket, holster bracket, mounting templates, installation guide, and installation hardware with spares. Charging adapters and electrical branch-circuit materials are not included unless expressly stated.
About EVIQO
EVIQO develops connected Level 2 home charging equipment with plug-in and hardwired configurations for J1772 and NACS vehicles. Electrical compatibility, connector type, circuit capacity, and current manufacturer instructions must be verified for every installation.
Related EVIQO Chargers
- EVIQO NACS Level 2 EV Charger, 48A (50A Max), 240V, Hardwired, for Tesla EVs
- EVIQO Level 2 EV Charger, 40A (9.6kW), 240V, NEMA 14-50 Plug-in, J1772 for Non-Tesla EVs
- EVIQO Level 2 EV Charger, 48A (11.5kW), 240V, NEMA 14-50 Plug-in, J1772 for Non-Tesla EVs
Browse the EVIQO collection for additional charging configurations.
Frequently Asked Questions
Will this 40A NACS charger work with my EV?
Match the vehicle inlet. NACS plugs in directly only to a compatible inlet. An automaker-approved adapter may support a different inlet, but the adapter is not included and must be rated for the charger and vehicle.
What electrical circuit does this charger require?
This nema 14-50 plug-in model requires dedicated 40a or 50a circuit with a correctly installed nema 14-50 receptacle. Continuous EV charging is governed by electrical-code load rules, so a licensed electrician should verify the panel, circuit, conductors, protection, receptacle where applicable, and local permitting.
Does charging work without Wi-Fi or the app?
Plug-and-charge operation is available without Wi-Fi. A 2.4 GHz internet connection is required for app pairing, schedules, remote controls, energy tracking, and software updates.
Installation Instructions
- Confirm the vehicle connector, charger configuration, available service capacity, branch circuit, overcurrent protection, conductor sizing, mounting location, cable reach, and local permit requirements before work begins.
- Have a licensed electrician install or verify the dedicated circuit and NEMA 14-50 receptacle or hardwired connection according to the current EVIQO manual and all applicable codes.
- Mount the charger and holster on a suitable surface, route the cable away from heat, sharp edges, standing water, and vehicle traffic, then complete the manufacturer's startup and network setup.
- Test charging at a conservative current, verify normal operation and connector temperature, and do not use the unit if any receptacle, plug, cable, connector, breaker, or enclosure shows damage or abnormal heat.
