Click to zoom in
Fix your broken fuel line retaining clip on your 6.7L Power Stroke with our direct replacement fuel line clips. For use on both the 1/2" and 12MM fuel connections located throughout the fuel system including the fuel pump, lower fuel filter housing, and under hood fuel filter connections.
Key Features
- Purpose-built fittings
- Exact configuration is identified by the manufacturer part number
- Compatibility depends on the documented vehicle or component application
- Included components are limited to the exact listing configuration
Fitment
This product has no independent year-make-model claim. Match the exact component family, dimensions, connector or mounting interface, and manufacturer part number before ordering.
Specifications
| Brand | Fleece Performance |
|---|---|
| Manufacturer Part Number | FPE-FL-RC-FMC-4P |
| Product Type | Fittings |
| Condition | New |
| Engine | 6.7L |
What's Included
One new Fleece Performance product identified by manufacturer part number FPE-FL-RC-FMC-4P. Additional fittings, fluids, hoses, wiring, tuning, tools, and hardware are included only when expressly stated for this exact part number.
About Fleece Performance
Fleece Performance Engineering develops diesel fuel-system, turbocharger, cooling, valvetrain, engine, and electrical components for Cummins, Duramax, Power Stroke, and related applications. Correct selection depends on the exact part number and complete application details.
Related Fleece Performance Products
- Shop all Fleece Performance products
- Fleece Performance Cummins Transmission Heat Exchanger Bypass Plug Kit
- Fleece Performance Universal -10 to 7/8in-14 Straight Male Black w/ O-Ring
- Fleece Performance Universal -10AN 90Deg to Hose Barb - Black
Frequently Asked Questions
How do I confirm Fleece Performance FPE-FL-RC-FMC-4P fits?
Match the exact engine or component family, dimensions, connector or mounting interface, and manufacturer part number. Contact us before ordering when any of those details differ.
What is included with Fleece Performance FPE-FL-RC-FMC-4P?
The listing includes only the components stated in the What's Included section. Related fittings, wiring, fluids, tools, and supporting parts are not included unless expressly listed.
Does installation require tuning or additional parts?
Requirements vary by application. Confirm tuning, calibration, fluids, seals, fittings, wiring, specialty tools, and supporting modifications before installation.
Installation Instructions
- Verify the exact application and inspect every included component before installation.
- Follow the current Fleece Performance instructions for the exact part number, including all torque, sealing, wiring, fluid, clearance, priming, and calibration requirements.
- Check for leaks, fault codes, abnormal operation, and loose connections after startup and again after the initial drive.
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
Fittings
AN, NPT, and metric fittings for fuel, oil, cooling, brake, power steering, and intercooler systems are stocked at Black Ops Auto Works. Shop hose ends, swivel fittings, bulkhead adapters, elbow fittings, unions, tees, reducers, port plugs, banjo fittings, and thread adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, 2JZ, and turbocharged or supercharged builds. Every product is filterable by size, thread type, and application so the correct fitting ships the first time. Black Ops Auto Works carries 2,252 fitting SKUs across AN hardware, NPT adapters, banjo fittings, and specialty plumbing hardware. What This Category Covers The Fittings collection covers the connective hardware that joins hoses, hard lines, and components across fuel, oil, cooling, brake, and forced induction plumbing. Fittings determine whether a fluid system stays leak free under the pressure, heat, and vibration loads found in performance street and race applications, so correct thread typ...
View Fittings Products
Fleece Performance
Shop Fleece Performance diesel fuel-system, turbocharger, cooling, engine, valvetrain, and electrical components for Cummins, Duramax, Power Stroke, and related applications. Vehicle-specific products must match the complete year, make, model, engine, body configuration, factory equipment, connector, and application notes. Universal parts must match the exact dimensions and component interface. Fleece Performance Product Families Cheetah turbochargers, turbo installation parts, oil-feed lines, and drain components PowerFlo and SureFlo lift pumps, CP3 systems, filters, fuel lines, and injection components Coolant bypass kits, reservoirs, hoses, thermostat parts, and cooling-system hardware Cylinder heads, gaskets, valvetrain components, engine blocks, and service hardware Sensor pigtails, wiring harnesses, connectors, lighting modules, and control components Choosing the Correct Fleece Performance Part Match the complete year, make, and model shown in the product fitment table Co...
View Fleece Performance Products