Click to zoom in
With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state.
Key Features
- Adjustable Through Shaft Design: Provides single external compression adjuster with 8 clicks of damping range for fine-tuning to match suspension setup and driving style.
- Aluminum Body Construction: Dissipates heat faster than steel equivalents to maintain consistent performance during long hauls or high-speed desert runs.
- External Reservoir: Increases fluid capacity by 35 percent for cooler operation and prevents cavitation under heavy loads.
- Extended length 22.05 inches, compressed 13.40 inches, 8.65 inches travel, 0.875 inch shaft.
- Eyelet mounts 0.750 inch diameter top and bottom compatible with stock bushings.
- Black anodized Type III aluminum body with 0.875 inch 4130 steel shaft for strength and heat resistance.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2008-2010 | Dodge | 2500 | Drive: 4WD | Position: Stabilizer | Model note: Official model group: Ram 2500 |
| 2008-2010 | Dodge | 3500 | Drive: 4WD | Position: Stabilizer | Model note: Official model group: Ram 3500 |
| 2011-2013 | Ram | 2500 | Drive: 4WD | Position: Stabilizer |
| 2011-2012 | Ram | 3500 | Drive: 4WD | Position: Stabilizer |
Specifications
| Brand | FOX |
|---|---|
| Manufacturer Part Number | 983-02-147 |
| Product Type | Steering Stabilizer |
| Condition | New |
| Fitment State | Vehicle Specific |
| Body Diameter | 2 |
| Bottom Mount Type | Eyelet |
| Compressed Length | 14.07 |
| Extended Length | 22.18 |
| Lifetime Warranty | No |
| Position | Stabilizer |
| Series | Factory Race |
| Shock Type | Stabilizer |
| Top Mount Type | Tie Rod Clamp |
| Travel Length | 8.11 |
What's Included
One new FOX product package identified by manufacturer part number 983-02-147. Only components expressly supplied for this exact part number are included.
About FOX
FOX develops performance suspension products for street, off-road, racing, and specialty vehicle applications. Correct selection remains exact-application and exact-part-number specific.
Related FOX Products
- Fox 2008+ Dodge Ram 2500/3500 4WD 2.0 Performance Series IFP Steering Stabilizer (Alum)
- Fox 14-18 Ram 2500/3500 2.0 Perf Series 8.2in 23.3in Ext Through Shaft Axle Mount ATS Stabilizer
- Fox 14-18 RAM 2500/3500 2.0 Performance Series 8.3in TS Stabilizer Axle Mount
Browse the FOX collection for related suspension and service components.
Frequently Asked Questions
Will FOX 983-02-147 fit my 2008-2010 Dodge 2500?
That year-make-model is listed, but the trim, drivetrain, suspension package, position, lift height, production split, and every application note must also match.
Does FOX 983-02-147 change ride height or require supporting parts?
That depends on the exact application and configuration. Confirm the stated lift range, spring requirements, upper control arms, brackets, reservoirs, steering parts, alignment needs, and wheel and tire clearance before installation.
What is included with FOX 983-02-147?
The package includes only the components supplied by FOX for this exact part number. Springs, reservoirs, brackets, clamps, hardware, companion shocks, service fluid, and installation tools are separate unless expressly listed.
Installation Instructions
Follow the current FOX instructions and vehicle service information for this exact part number. Support the vehicle safely, use the specified tools and torque values, inspect all mounts and hardware, verify brake-line, steering, driveline, reservoir, wheel, and tire clearance, settle the suspension, and complete an alignment whenever geometry or ride height changes. Professional installation is recommended.
FOX
Shop FOX shocks, coilovers, control arms, steering stabilizers, bump stops, and suspension service components at Black Ops Auto Works. Compare vehicle-specific upgrades and replacement parts for supported trucks, SUVs, Jeeps, and off-road builds. Match the exact FOX part number to the vehicle, installed suspension, axle position, and intended use. FOX Performance Series Shocks and Coilovers This collection includes 2.0 and 2.5 Performance Series IFP shocks and coilovers for selected applications, including Toyota Tacoma, Ford F-Series, GM trucks, and Suzuki Jimny listings. Different front and rear products support different suspension arrangements and stated lift ranges. IFP refers to an internal floating piston used within the shock design. The product family alone does not establish compatible mounts, travel, valving, or ride height. Check the complete application and dimensions instead of choosing a shock by body diameter or advertised lift alone. Performance Elite, Factory Serie...
View FOX Products
Steering Stabilizers
Steering Stabilizers Steering stabilizers for Jeep Wrangler, Ford Super Duty, Ram heavy-duty and Silverado HD trucks help control steering kickback, road vibration and tire feedback on lifted and off-road builds. Black Ops Auto Works carries 194 steering stabilizer SKUs including single dampers, dual kits, brackets, cylinders, boots and relocation hardware with fitment filters for year, make, model, trim, engine and drivetrain. What This Steering Stabilizers Collection Covers This selection covers direct-fit replacement stabilizers, dual steering stabilizer systems, monotube dampers and mounting kits for Wrangler JK and JL, F-250 and F-350 Super Duty, Ram 2500 and 3500, Silverado HD, Tacoma and 4Runner applications. Single and Dual Steering Stabilizer Kits A single stabilizer is a practical replacement for an OE damper. Dual kits add damping capacity for larger tires, heavy front ends and demanding trail use when the bracket system is made for the exact axle and lift combination...
View Steering Stabilizers Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products