Click to zoom in
This FOX steering stabilizer is selected by exact dimensions, mounting interface, position, travel, valving, quantity, and intended suspension function. Confirm manufacturer part number 803-02-040 and every physical requirement before ordering.
Key Features
- Fox 803-02-040 universal aluminum tie rod mounting clamp.
- Sized for 1-3/8 inch (1.375") tie rods.
- Anodized aluminum construction for corrosion resistance.
- Position the clamp halves around the tie rod at the correct diameter point.
Fitment
| Fitment Basis | Universal by exact dimensions, mounting interface, position, travel, and intended suspension function |
|---|---|
| Required Verification | Confirm every dimension, mount, clearance, spring, reservoir, valving, and service requirement |
Specifications
| Brand | FOX |
|---|---|
| Manufacturer Part Number | 803-02-040 |
| Product Type | Hardware - Singles |
| Condition | New |
| Fitment State | Universal |
| Lifetime Warranty | No |
| tier2 | Parts |
What's Included
One new FOX product package identified by manufacturer part number 803-02-040. Only components expressly supplied for this exact part number are included.
About FOX
FOX develops performance suspension products for street, off-road, racing, and specialty vehicle applications. Correct selection remains exact-application and exact-part-number specific.
Related FOX Products
- Fox Mounting Hardware 1 5/8in Tie Rod Clamp Steering Stabilizer
- Fox Mounting Hardware 1.5 Tie Rod Clamp Steering Stabilizer
- Fox Bar Pin .750 OD 4.38 Tlg 3.5 Spacing M12 x 1.75 Holes 1045 Steel Zinc Plated
Browse the FOX collection for related suspension and service components.
Frequently Asked Questions
Is FOX 803-02-040 tied to a specific vehicle?
No verified YMM is assigned. Match the dimensions, mounts, position, travel, spring or reservoir configuration, valving, and intended function before ordering.
Does FOX 803-02-040 change ride height or require supporting parts?
That depends on the exact application and configuration. Confirm the stated lift range, spring requirements, upper control arms, brackets, reservoirs, steering parts, alignment needs, and wheel and tire clearance before installation.
What is included with FOX 803-02-040?
The package includes only the components supplied by FOX for this exact part number. Springs, reservoirs, brackets, clamps, hardware, companion shocks, service fluid, and installation tools are separate unless expressly listed.
Installation Instructions
Follow the current FOX instructions and vehicle service information for this exact part number. Support the vehicle safely, use the specified tools and torque values, inspect all mounts and hardware, verify brake-line, steering, driveline, reservoir, wheel, and tire clearance, settle the suspension, and complete an alignment whenever geometry or ride height changes. Professional installation is recommended.
FOX
Shop FOX shocks, coilovers, control arms, steering stabilizers, bump stops, and suspension service components at Black Ops Auto Works. Compare vehicle-specific upgrades and replacement parts for supported trucks, SUVs, Jeeps, and off-road builds. Match the exact FOX part number to the vehicle, installed suspension, axle position, and intended use. FOX Performance Series Shocks and Coilovers This collection includes 2.0 and 2.5 Performance Series IFP shocks and coilovers for selected applications, including Toyota Tacoma, Ford F-Series, GM trucks, and Suzuki Jimny listings. Different front and rear products support different suspension arrangements and stated lift ranges. IFP refers to an internal floating piston used within the shock design. The product family alone does not establish compatible mounts, travel, valving, or ride height. Check the complete application and dimensions instead of choosing a shock by body diameter or advertised lift alone. Performance Elite, Factory Serie...
View FOX Products
Hardware
Engine hardware, fasteners, and mounting hardware kits for builds, fabrication, and suspension work are stocked at Black Ops Auto Works. Shop ARP engine bolts and stud kits, suspension mounting hardware from Fox and Rock Krawler, bumper mount kits, tie rod clamps, joint retainer tools, and single and kit-packaged hardware for domestic, import, and off-road platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 945 Hardware SKUs across engine hardware, suspension mounting hardware, and single-piece or kit-packaged fasteners. What This Collection Covers Hardware groups together the fasteners, mounting kits, clamps, and small components that hold engines, suspension systems, and accessories together. This includes ARP engine hardware such as intake manifold bolts and cam bolt kits, suspension mounting hardware from Fox and Rock Krawler for shock and steering stabilizer installs...
View Hardware Products
Hardware - Singles
Individual mounting hardware for automotive builds is stocked at Black Ops Auto Works. Shop single bolts, pins, clamps, crush washers, relays, and bar pins from ARP, Dorman, Vibrant, Fox, Fragola, HKS, Moroso, PRP, Westin, and Zone Offroad for a wide range of vehicle applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 329 individual hardware SKUs across type and application. What This Category Covers This collection covers small individual hardware components sold as single items rather than complete kits, for builders who need a specific bolt, pin, clamp, or fastener without purchasing a full assortment. Categories Included Single bolts, dowel pins, hose clamps, crush washers, electrical relays, and bar pins covering a wide range of mounting and fastening applications across suspension, exhaust, engine, and accessory installs. Why Buy Hardware as Singles Many hardware...
View Hardware - Singles Products