GFB Mitsubishi Evo 1-10 TMS Respons Blow Off Valve Kit

Blow off valves and boost release accessories for turbocharged and supercharged vehicles are stocked at Black Ops Auto Works. Shop GFB, Turbosmart, Granatelli, HKS, and GReddy blow off valves for Subaru WRX and STI, Mercedes AMG, GR Corolla and GR Yaris, Civic Type R, Ram Hurricane, Nissan S14 and S15, and GT-R platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 341 blow off valve SKUs across style and vehicle platform. What This Category Covers Blow off valves release excess boost pressure from the intake tract when the throttle closes, protecting the turbocharger and intercooler piping from pressure spikes that can otherwise cause compressor surge. This collection covers vent to atmosphere and hybrid recirculating blow off valves along with mounting hardware and replacement components. Categories Included Vent to atmosphere blow off valves, hybrid recirculating blow off...

Choose Dodge Stealth gauge mounts and brake-service components by exact vehicle equipment. A pod’s gauge openings and mounting scope are separate from the instruments and signals needed to use it. Single and Dual Gauge Pods AutoMeter offers specified Stealth/3000GT pillar-pod applications with single or dual 52mm gauge arrangements. Compare the exact pod, gauge depth and mounting instructions before choosing instruments. A pod is a mounting component, not an automatic supply of gauges, senders or wiring. Plan the measured signal and supporting electrical or pressure connections separately. Brake Hydraulics and Suspension Service Match a master cylinder to the actual brake layout, actuation, mounting and connections. Keep modified caliper or brake-conversion details available when selecting service components. Strut mounts and protection pieces should follow the suspension currently fitted. Compare position, bearings, hardware and kit contents rather than assuming a mount includes a ...

Find Eagle Talon gauge mounts and engine-service components by generation and installed powertrain. First- and second-generation cabin applications and a DSM 4G63 damper should each follow their own coverage. Gauge Pods by Cabin Application AutoMeter lists separate 1990–1994 and later Eclipse/Talon pod applications. Compare the exact single, dual or triple arrangement, nominal 52mm gauge size and any body exclusions. A pod is a mounting component. Choose instruments by depth and measurement, then plan the sender, signal source and wiring that those gauges require. DSM Damper and Suspension Service The listed Fluidampr component identifies a Mitsubishi 4G63/T DSM engine application. Confirm the engine actually installed and review mounting and accessory-drive requirements rather than assuming every Talon powertrain is identical. Strut mounts and protection pieces follow the actual axle and assembly. Compare bearings, boots, bump stops and hardware independently from the complete damp...

Shop forced induction parts, turbochargers, supercharger kits, intercoolers and boost-control components at Black Ops Auto Works. Explore direct-fit upgrades and components for custom builds, plus blow off valves, wastegates, charge pipes, turbo inlets and replacement hardware. Match your engine, existing equipment and manufacturer part number to choose the right component for the job.The collection also includes Nitrous Express nitrous systems and Snow Performance water-methanol injection products. These are separate power-adder and charge-cooling options with their own fuel, control and installation requirements. A shared vehicle application does not make every component in a boosted build interchangeable.Shop Forced Induction Parts by SystemStart with the part of the system you are replacing or upgrading. A complete vehicle-specific kit, a standalone turbocharger and a replacement valve seal kit are different purchases; check the contents of the exact listing. Product family Wha...

Shop Go Fast Bits turbo-system components, including diverter valves, blow-off valves, boost controllers, wastegate hardware, pulleys, shifters, and installation accessories. Match the exact GFB part number, year, make, model, factory turbo, and connection style before ordering. Go Fast Bits Product Families The collection includes DV+, VTA, Respons, Mach 2, Hybrid, and Deceptor Pro valve configurations alongside manual boost controllers, wastegate actuators, springs, flanges, pulleys, gauge adapters, and service components. Choose Your Part Match the manufacturer part number and listed year, make, and model application Confirm the factory turbo, diverter valve, flange, inlet, outlet, and electronic control system Choose recirculating, atmospheric, or adjustable venting only when compatible Verify whether tuning or supporting hardware is required Use current GFB instructions for installation and adjustment Related Performance Collections Boost Controllers Wastegates Turbocharge...

Find Mitsubishi 3000GT intake, gauge-mount and service components by exact production, engine and equipment. Non-turbo intake applications require separate confirmation from turbocharged configurations. Non-Turbo Intake Application Injen’s 3000GT non-turbo instructions identify a V6 non-turbo installation. Match the exact system number, production and supported sensor/mounting arrangement. Confirm air-meter connections, hoses and required installation parts. Do not extend non-turbo kit support to a turbocharged car or an engine conversion. Gauge Pods and Brake Components Compare AutoMeter single/dual gauge pods by actual gauge diameter, depth, mounting location and body application. Review gauges, senders and wiring separately from the pod. For a Stealth master-cylinder reference, require explicit 3000GT support and match bore, mounting, outlets and brake configuration. Parking-brake shoes need independent drum/hat dimensions and hardware checks. Choose Your Part Identify exact pro...

Compare Mitsubishi Eclipse intakes, gauge mounts and engine accessories by exact generation, engine and transmission. Turbocharged 2.0L, other four-cylinder and V6 applications require separate systems. Intake System by Engine and Transmission Match the exact Injen number to engine, production and transmission. The displayed 2.4L manual-transmission system is a different application from 2.0L turbo, 3.0L V6 or 3.8L V6 references. Confirm sensor connections, hoses, brackets and installation layout. Compare short-ram and cold-air versions by complete supported application rather than finish color. Gauge Pods and Engine Covers For the 1995–1999 triple pillar pod reference, confirm body application and the stated convertible exclusion. Match gauge diameter, depth and wiring/hose routing separately. A turbo spark-plug-wire cover requires the exact engine and attachment layout. Floor mats need their own supported footwell shape, retention and pedal clearance. Choose Your Part Identify ex...

Shop Mitsubishi Lancer intake, exhaust and window accessories by exact generation, engine and body. Regular non-turbo and Evolution applications require separate part-number checks. Engine-Specific Intake and Exhaust Compare 2.0L non-turbo and 2.4L GTS Injen systems by exact production, engine, transmission and sensor arrangement. Match hoses, brackets and required installation parts. For a 2.4L axle-back exhaust, confirm pipe connections, hangers and bumper clearance. Review the supplied section rather than assuming a complete exhaust system. Window and Electronic Accessories Select window deflectors for the correct generation and door/body shape. Compare the earlier and later Lancer references independently. For a throttle controller or Evo gauge pod, require exact Lancer electronic/body support. A shared engine-size description does not establish pedal connector or pillar compatibility. Choose Your Part Identify exact generation, engine, body and transmission. Match intake senso...

Shop Subaru Legacy floor protection and accessory applications by exact generation and engine. Compare front/second-row coverage and current equipment before selecting shared Outback references. Floor Coverage by Generation Combined cabin packages differ from second-row-only liners. Match exact production, contours, retention points and the supplied pieces. A shared Legacy/Outback title needs the specific year and floor-layout application confirmed. Earlier-generation liners should not be extended to a newer cabin by model naming alone. Lighting and Engine Accessories Fog-light pocket kits require matching bumper geometry, brackets and wiring. Confirm the exact kit application and installation contents. A BRZ-led damper reference needs the correct Legacy engine and supported adapter combination. Pedal controllers separately require exact vehicle and connector coverage. Choose Your Part Identify generation, engine and body equipment. Select exact front/second-row floor coverage. Mat...