Goodridge 02+ Mercedes C-Coupe Brake Lines

Brake line kits and stainless steel brake lines for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop front brake line kits, rear brake line kits, full vehicle brake line sets, braided stainless lines, DOT approved lines, banjo fitting lines, and vehicle specific replacement lines for Hellcat, Trackhawk, TRX, HEMI, Coyote, and import platforms from Rotora, Goodridge, ISR Performance, StopTech, and Black Ops Auto Works. Every brake line kit is filterable by year, make, model, trim, engine, and drivetrain so the correct length, fitting size, and routing ships the first time. Black Ops Auto Works carries 647 brake line kit SKUs across front, rear, and full vehicle categories. What This Collection Covers Brake lines carry pressurized brake fluid from the master cylinder and ABS module to each caliper. Factory rubber brake lines expand slightly under hard braking pressure, which creates a small amount of pedal sponginess. Stainless steel braided lin...

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

Shop Goodridge braided stainless brake lines, clutch lines, and performance brake fluid for import, domestic, truck, and performance-car applications. Match the exact manufacturer part number, year, make, model, brake package, line position, and factory fittings before ordering. Goodridge Product Families The collection includes complete G-Stop brake-line kits, front-only and rear-only hose sets, hydraulic clutch lines, Phantom line finishes, and DOT 4 brake fluid. Line count, end fittings, hose length, color, and road-use certification vary by part number. Choose Your Part Match the exact year, make, and model Confirm the factory or upgraded brake package and calipers Choose complete, front-only, rear-only, or clutch-line coverage Verify line length for lifted, lowered, or modified suspension Confirm fitting type, hose finish, DOT status, and required fluid Related Brake and Hydraulic Collections Brake Line Kits Clutch Lines Brake Products Fittings Frequently Asked Questions H...

Compare Mercedes-Benz C230 suspension and brake-service components using exact generation, body and drivetrain. A damper application excluding 4Matic must be respected. Dampers and Protective Components Match front damper mounts, travel and chassis coverage, including the stated 4Matic exclusion. Confirm the actual drivetrain before selecting the component. Boots and bump stops are protective service parts, separate from complete dampers. Review kit contents, retained mounts and installation requirements. Brake Kits and Electronic Accessories For pad-and-rotor kits, compare caliper, pad shape, rotor dimensions and axle coverage. Confirm pairs, hardware and sensor contents before planning the repair. For pedal-control accessories, match the exact supported chassis, connector and harness. Another Mercedes application does not establish C230 support. Choose Your Part Identify body, generation and drivetrain. Respect 4Matic damper exclusions. Separate protective parts from complete dam...

Choose Mercedes-Benz C240 dampers and brake components using the actual chassis, drivetrain and fitted assemblies. Application exclusions and complete kit contents should be reviewed before purchase. Front Suspension Service Identify drivetrain before choosing a front damper. An application excluding 4Matic should not be extended to that configuration. Compare mounts, travel, retained components and protective boots or bump stops separately. A protective kit does not supply a complete replacement strut. Rotors, Friction and Accessory Fit Match rotor diameter, thickness, offset and mounting to the actual caliper. Compare pad backing shape and exact axle coverage before choosing compound. For an electronic pedal accessory, confirm supported year/chassis and connector. Existing electronic modifications need a separate manufacturer review. Choose Your Part Record chassis and actual drivetrain. Check front-damper application and exclusions. Compare protective and complete suspension con...

Plan Mercedes-Benz C280 suspension and brake service using exact chassis, drivetrain and current equipment. Front-damper exclusions and rotor geometry are independent selection requirements. Dampers and Strut Protection For the displayed front-damper family, respect the stated 4Matic exclusion and verify actual drivetrain. Compare mounts, travel and supported production coverage. For boots and bump stops, identify service position and exact contents. Review retained mounts, sleeves and fasteners rather than assuming a full strut assembly is supplied. Brake Geometry and Compound Use Match calipers, pad backing shape and rotor dimensions at each axle. A pad/rotor kit must identify exact axle and complete supplied components. Choose compound for actual driving use and compatible rotor material. For pedal-control products, compare the exact supported connector and harness separately. Choose Your Part Identify chassis and drivetrain. Respect damper equipment exclusions. Separate boots/m...

Compare Mercedes-Benz C32 AMG brake components using the fitted W203 calipers, rotor package and intended driving use. Other AMG or shared pad references require their own exact application check. Front and Rear Friction Fit The displayed C32 AMG references identify 2002–2004 W203 front-pad applications. Confirm exact production and backing shape, then identify rear components independently. Match rotor material, dimensions and mounting to the chosen pads. A compound label does not identify every brake-package variation. Operating Use and Electronic Accessories Review manufacturer intended-use, preparation and bedding guidance before changing compound. Compare required sensors and hardware against exact contents. For a pedal-control accessory, confirm supported chassis, pedal connector and harness. A product for another Mercedes family should not be assumed compatible with the C32. Choose Your Part Identify W203 production and fitted brake equipment. Match front and rear pad applic...

Choose Mercedes-Benz C320 suspension and brake-service components by exact chassis, body and drivetrain. Front-damper equipment restrictions and complete kit contents require separate checks. Dampers and Protective Pieces Confirm the actual drivetrain before selecting a front damper with a stated 4Matic exclusion. Match chassis, mounting and travel using the exact manufacturer application. Boots and bump stops are separate protective service components. Compare retained mounts, sleeves and fasteners rather than assuming a complete strut assembly is supplied. Brake Geometry and Kit Contents Match caliper, pad backing shape and complete rotor dimensions at the required axle. Review pad-and-rotor kit coverage and any supplied sensors or hardware. For pedal-control accessories, confirm the exact chassis, connector and harness independently of brake or suspension applications. Choose Your Part Identify chassis, body and drivetrain. Respect front-damper 4Matic exclusions. Separate protec...

Compare Mercedes-Benz C350 brake and suspension-service components using exact generation, body and drivetrain. Mounts, protective boots and complete dampers serve different repair needs. Suspension Position and Equipment For front dampers, verify drivetrain coverage and respect stated 4Matic exclusions. Compare mounting, travel and exact production application. For rear mounts, identify mounting pattern and installed suspension separately. A boot, bump stop or mount package does not necessarily supply a complete damper assembly. Brake Kits and Electronic Fit Match pad shape, caliper and rotor geometry at each axle before comparing compound. Confirm whether the kit supplies pairs, hardware or sensors. Pedal accessories require exact supported chassis, connector and harness. Include existing electronic changes when requesting application help. Choose Your Part Identify generation, body and drivetrain. Match front damper and rear-mount applications. Review protective versus complete ...

Compare Mercedes-Benz C36 AMG brake, alignment and wheel-spacing components using the exact chassis and installed equipment. Replacement ignition parts need a separate engine specification check. Brakes and Alignment Components Match caliper, pad backing shape and full rotor geometry before choosing a friction kit. Confirm exact axle coverage, hardware and sensor contents. For an alignment cam, identify the supported location, adjustment function and installation requirements. It is separate from a complete control arm or a repair for worn suspension joints. Spacers and Ignition Service Compare DR/DRA fastening design, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheels and tires. For plugs, match installed engine and required dimensional/operating specification. Confirm service quantity separately from a four-plug box. Choose Your Part Identify chassis and fitted brakes. Confirm alignment-cam location and function. Compare spacer hardw...

Compare Mercedes-Benz C43 AMG exhaust and brake options using exact generation, body and engine. A W205 exhaust application does not establish support for every C43 configuration. Exhaust and Valve-Accessory Contents AWE identifies W205 C43 applications within its C400/C450/C43 exhaust suite. Match exact system number, body and existing exhaust equipment. The displayed electronic valve-simulator package states two units. Confirm that the exact simulators are required and supported for the chosen system rather than treating them as exhaust valves or mufflers. Brake Equipment and Service Interfaces Match rotor diameter, thickness, offset and mounting to the fitted calipers. Compare pad backing shape, axle coverage and any AMG Sport equipment notes. Sensor wires and installation hardware need their own connection and contents checks. Choose friction material for intended use after exact fit is established. Choose Your Part Identify generation, body and engine. Confirm W205 exhaust sys...

Choose Mercedes-Benz C55 AMG brake and chassis-service components using the fitted assemblies rather than another AMG model’s shared reference. Suspension, alignment and wheel interfaces need separate checks. Brake and Damper Applications Match caliper, pad backing shape and rotor package before comparing compounds. A C32 reference does not establish every C55 brake application. For front dampers, verify exact chassis and equipment support, including stated drivetrain restrictions. Compare mounts and travel independently of brake fit. Alignment Cams and Spacers For a camber/caster cam, identify supported location, adjustment function and installation procedure. Inspect worn joints and mounting hardware as part of alignment planning. For DR/DRA spacers, match pattern, bore, centering, thread, bolt seat and engagement. Measure current wheel/tire clearance before choosing width. Choose Your Part Identify fitted C55 brake and suspension equipment. Match pad geometry and damper applicat...

Compare Mercedes-Benz CLK320 brake and suspension-service components using exact generation, body and installed equipment. Kit names and shared family references do not establish complete application coverage. Brake-Kit Geometry and Contents Match fitted calipers, pad backing shape and rotor diameter, thickness, offset and mounting. Identify front and rear applications independently. For a pad-and-rotor kit, confirm supplied axle, pair quantity, hardware and sensors. Compare compound for intended driving use after physical fit. Suspension and Pedal Interfaces For dampers, match exact chassis, drivetrain, mounts and travel; respect any 4Matic exclusion. Boots and bump stops are separate protective service pieces. For electronic pedal accessories, compare supported chassis, connector and harness independently. Review existing electronic changes and exact installation instructions. Choose Your Part Identify generation, body and drivetrain. Match brake geometry and axle coverage. Revie...

Choose Mercedes-Benz CLK350 brake and chassis components using exact body, generation and actual wheel equipment. Brake geometry and wheel spacing require independent measurements. Friction and Suspension Applications Identify calipers, pad backing shape and full rotor dimensions before selecting a kit. Confirm axle coverage, pairs and required hardware. For suspension dampers or boots, compare exact chassis, drivetrain restrictions, mounts and service position. A protective kit is separate from a complete damper. Wheel-Spacer and Electronic Fit Match DR/DRA fastening design, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheel width, offset and tire size. Pedal-control accessories require their own supported chassis, harness and connector. Include existing modifications in that review. Choose Your Part Identify body, generation and drivetrain. Match brake geometry and kit contents. Check damper restrictions and protective pieces. Review ...

Plan Mercedes-Benz CLK430 brake service from the fitted calipers and rotor dimensions. Compare kit contents and intended compound use separately from physical application. Pads and Rotor Geometry Identify caliper, pad backing shape and rotor material before choosing friction components. Compare front and rear specifications independently. Match rotor diameter, thickness, offset and mounting. A shared product family or slotted finish does not identify the exact installed package. Complete Kits and Accessory Application For pad-and-rotor sets, confirm axle coverage, supplied quantity, sensors and hardware. Review exact manufacturer preparation and bedding guidance. For an electronic pedal accessory, confirm supported chassis and connector rather than relying on another Mercedes-family title. Include any existing electronic modifications. Choose Your Part Identify fitted calipers and rotor material. Compare complete rotor geometry by axle. Review kit quantity, sensors and hardware. Co...

Compare Mercedes-Benz CLK500 brake, ignition and wheel-spacing components using exact generation and installed equipment. Engine and wheel applications need separate confirmation from brake fit. Friction and Protective Service Parts Match caliper, pad backing shape and rotor dimensions by axle. Choose compound for actual driving use after physical application is established. For strut boots, identify service position and exact contents. Protective pieces do not provide a complete damper or correct worn mounts automatically. Spacers and Ignition Specification Compare DR/DRA system, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance with actual wheels and tires. For spark plugs, match the fitted engine’s required specification and complete service quantity. Material or box count alone does not determine application. Choose Your Part Identify generation, engine and fitted brakes. Match friction geometry and protective contents. Review spacer fasteners and me...

Choose Mercedes-Benz CLK55 AMG brake and suspension-service components using exact production and fitted calipers. Competition pad references require a separate operating-use review. Race-Pad and Road-Service Choices The displayed DTC-60 front-pad reference identifies 2005–2006 CLK55 AMG coverage. Confirm exact calipers, pad shape and rotor package before choosing it. Compare race operating requirements with actual use. A similar backing shape across compounds does not establish identical road behavior or rotor preparation. Sensors and Damper Application Match brake-sensor connector, length, routing and service position independently from pad fit. Review complete hardware contents. For front dampers, confirm exact chassis support, mounts, travel and drivetrain restrictions. Electronic pedal accessories need separate supported connector and harness confirmation. Choose Your Part Identify production and installed calipers. Match exact front-pad application and rotor material. Choose ...

Choose Mercedes-Benz CLK63 AMG brake components using exact production, variant and installed brake package. Shared pad-shape references do not establish one compound for every use. Front Pads and Rotor Material The visible DTC-60 reference identifies 2007–2008 CLK63 AMG front applications. Confirm exact caliper, backing shape and rotor material before selecting the part. Identify rear components and any special brake package independently. Review race operating requirements and the manufacturer’s rotor preparation and bedding guidance. Sensors and Complete Hardware Compare sensor connector, length, routing and service position separately from pad geometry. A hardware kit must match the actual assembly and supply the required pieces. For pedal-control accessories, confirm exact supported chassis and electronic interface. Existing modifications and variant equipment need their own application review. Choose Your Part Identify production, variant and actual brake package. Match front...

Choose Mercedes-Benz E300 brake-service parts using the exact chassis and brake equipment. Separate rotor geometry, friction use and installation hardware before comparing complete kits. Rotor and Caliper Identification Record the installed front and rear calipers and rotor dimensions. Another E-Class or GLC rotor reference does not establish E300 compatibility without exact manufacturer support. Compare mounting, thickness, overall height and any equipment exclusions. Determine pad backing shape from the installed caliper rather than from compound name. Friction Kits and Supporting Parts For EBC S5 Yellowstuff/GD references, check exact application, axle and supplied contents. Review intended use, rotor preparation and bedding instructions. Match wear-lead connectors and routing, rear hardware and protective boots independently. A boot package should not be treated as a complete damper assembly. Choose Your Part Identify chassis, production and installed brakes. Compare rotor geom...

Compare Mercedes-Benz E320 rear rotors, friction kits and protective suspension parts by exact generation and installed equipment. Broad production coverage requires a component-specific application check. Rear Rotor Dimensions A visible DFC E320 rear Geomet rotor reference spans 1994–2011. Confirm the exact rotor number and supported brake configuration rather than extending that range to every E320. Compare diameter, thickness, overall height and parking-brake arrangement. Check front components independently and include any brake conversions when identifying the assembly. Friction and Suspension Protection For EBC S5 Yellowstuff/GD kits, confirm axle, caliper application and complete contents. Review operating use and manufacturer bedding requirements. Front or front/rear protective boot references need their own exact damper application. Inspect retained mounts, bump stops and other components according to the installation instructions. Choose Your Part Identify exact E320 gene...

Choose Mercedes-Benz E420 brake and suspension-protection parts using exact production and fitted assemblies. Component identification matters more than shared E-Class naming when comparing applications. Rear Rotors and Friction Kits Compare installed rear-rotor diameter, thickness, overall height and parking-brake arrangement. An E320 rotor reference requires explicit E420 support before selection. For EBC S5 Yellowstuff/GD kits, confirm exact axle, pad backing shape, rotor compatibility and contents. Review intended use and the manufacturer’s preparation and bedding instructions. Protective Boots and Service Hardware Match front or front/rear boot packages to the actual dampers and mounting arrangement. Review bump stops, mounts and fasteners separately from the protective parts supplied. Compare wear-lead connectors, routing and service position against the installed brakes. Front friction and rotor applications require their own geometry and caliper checks. Choose Your Part Ide...

Choose Mercedes-Benz E430 brake components by installed caliper, rotor dimensions and exact production. A related E-Class application should be confirmed against the proposed manufacturer part number. Rear Rotors and Parking-Brake Geometry Match rear-rotor diameter, thickness, overall height and parking-brake arrangement. An E320 rear-rotor reference does not establish E430 fit without manufacturer confirmation. Identify front brake components separately. Include original part numbers and any brake conversion details when requesting an application check. Friction Kits and Pedal Accessories For EBC S5 Yellowstuff/GD kits, compare exact vehicle coverage, axle, pad backing shape and rotor contents. Review driving use and manufacturer bedding instructions. Pedal-control accessories need an independently supported chassis, connector and harness. A fitment reference for another Mercedes family is insufficient for the E430. Choose Your Part Identify production and fitted front/rear brakes...

Choose Mercedes-Benz E55 AMG friction parts by exact generation and installed calipers. A shared supercharged-engine or AMG reference does not identify every front and rear brake application. Pad Shape Before Compound Choice Record front and rear calipers, pad backing shape and rotor material. Confirm exact E55 support before selecting parts also referenced for CL55 or C32 models. Compare compound use only after fit is established. Review road or competition operating requirements and manufacturer rotor preparation and bedding instructions. Protective Components and Electronics For strut boots, confirm actual damper application and supplied protective pieces. Inspect retained mounts and bump stops according to the installation requirements. Pedal-control accessories require exact chassis, connector and harness support. Include existing electronic changes when requesting application review. Choose Your Part Identify exact E55 generation and brake equipment. Match pad backing shape a...

Choose Mercedes-Benz SLK230 wheel-spacing and ignition parts by exact production and installed equipment. Confirm full fastener and plug specifications before selection. Spacer Fastening and Clearance Compare DR/DRA fastening method, pattern, bore and centering. Match exact wheel-bolt thread, seat and required engagement rather than spacer width alone. Measure clearance with current wheels, tires and suspension. A 12x1.5 reference should not be exchanged for 14x1.5, even with a matching bolt pattern. Ignition, Alignment and Lighting Match spark-plug reach, seat, heat range and specified gap for the exact engine. Confirm required quantity independently from package count. Alignment hardware needs exact arm/service-position support. For bulbs, match base, voltage, wattage and lamp application; pedal accessories need separate electronic coverage. Choose Your Part Identify production, engine and current wheel setup. Confirm spacer system and exact fastening specification. Measure clear...

Choose Mercedes-Benz SLK32 AMG brake, spacer and alignment parts using exact installed equipment. Shared friction references need explicit AMG roadster support. Calipers and Compatible Friction Match front/rear calipers, pad backing shapes and rotor material independently. A similar Crossfire SRT6 reference does not establish every SLK32 application. Compare supported Redstuff, Yellowstuff or competition use after physical fit. Review full rotor geometry, sensors and manufacturer bedding requirements. Spacer and Alignment Interfaces For DR/DRA spacers, confirm system, pattern, bore, centering, exact thread and wheel-bolt seat/engagement. Measure clearance with current wheels and suspension. Camber/caster hardware needs exact arm and service-position support. Electronic pedal accessories require separate chassis and harness confirmation. Choose Your Part Identify actual AMG brake and suspension equipment. Match backing shapes, rotor material and use. Confirm spacer fasteners, center...

Compare Mercedes-Benz SLK55 AMG brake compounds by exact generation and installed performance package. A shared backing shape does not establish one friction choice for every use. Brake Package and Compound Use Identify actual front/rear calipers, pad backing shapes and rotor material. CLK55 or CLK63 references need exact SLK55 coverage, including relevant package exclusions. Compare HPS, Performance Ceramic, HP+ or DTC-60 options only after application is confirmed. Review the manufacturer’s road/competition operating requirements and compatible rotor guidance. Rear Service and Electronics Match rear-pad geometry and full rotor dimensions independently from front coverage. Review wear-lead connectors, routing and required hardware. Pedal-control accessories need exact chassis, connector and harness support. Include current electronic and brake modifications when asking for application guidance. Choose Your Part Identify generation and actual performance package. Match backing shap...