Sold out
Click to zoom in
Goodridge 12324 Stainless Steel Brake Line Kit for 1998-2000 Ford Contour and 1998-2002 Mercury Cougar with Rear Disc
Part number 12324 from Goodridge delivers a complete stainless steel braided brake line upgrade for the 1998-2000 Ford Contour SVT and 1998-2002 Mercury Cougar. These lines replace the factory rubber hoses with a PTFE-lined, stainless steel outer braid construction that eliminates the spongy pedal feel caused by hose expansion under pressure. Every line in kit 12324 is 100% pressure tested and meets DOT and TUV specifications for street-legal use in all 50 states.
Features and Benefits
- PTFE inner liner is chemically inert and compatible with all brake fluid types including DOT 3, DOT 4, and DOT 5.1
- Stainless steel outer braid provides a 24-strand, 72-wire construction for superior pressure resistance
- Eliminates volumetric expansion found in rubber hoses for immediate, firm pedal response
- Zinc-plated end fittings with 96-hour salt spray resistance for long-term corrosion protection
- Each line individually 100% pressure tested before shipping
- Meets DOT and TUV standards for street-legal worldwide use
- Heat range of -158 F to 500 F for track and street performance
- Complete kit with all lines needed for the rear disc conversion on the Contour and Cougar
Fitment Table
| Year | Make | Model | Trim |
|---|---|---|---|
| 1998 | Ford | Contour | SVT |
| 1999 | Ford | Contour | SVT |
| 2000 | Ford | Contour | SVT |
| 1998 | Mercury | Cougar | V6 |
| 1999 | Mercury | Cougar | V6 |
| 2000 | Mercury | Cougar | V6 |
| 2001 | Mercury | Cougar | S |
| 2001 | Mercury | Cougar | V6 |
| 2002 | Mercury | Cougar | S |
| 2002 | Mercury | Cougar | V6 |
Specifications
| Specification | Detail |
|---|---|
| Part Number | 12324 |
| UPC | 633694002182 |
| Material | Stainless Steel Braid / PTFE Inner Liner |
| Finish | Clear Coated Stainless Steel |
| Fitting Finish | Zinc-Plated Steel |
| Temperature Range | -158 F to 500 F |
| Position | Rear |
| ABS Compatible | Yes |
| Street Legal | DOT and TUV Approved |
| Warranty | Limited Lifetime |
What Is Included
- Complete set of rear stainless steel braided brake lines for the application
- All necessary end fittings pre-installed
- Installation hardware
Frequently Asked Questions
What vehicles does Goodridge 12324 fit?
Kit 12324 fits the 1998-2000 Ford Contour SVT with ABS and the 1998-2002 Mercury Cougar with rear disc brakes.
Are these brake lines DOT approved for street use?
Yes, all Goodridge lines including 12324 meet DOT and TUV standards and are street legal in all 50 states.
What is the difference between rubber and stainless steel brake lines?
Rubber hoses expand slightly under hydraulic pressure, causing a spongy pedal feel. Stainless steel braided lines in kit 12324 do not expand, giving an immediate and firm pedal response.
Will Goodridge 12324 work with ABS equipped Contours?
Yes, kit 12324 is specifically designed for the 1998-2000 Ford Contour with ABS.
What brake fluid is compatible with the PTFE liner?
PTFE is inert and compatible with all brake fluids including DOT 3, DOT 4, and DOT 5.1.
Do I need any special tools to install these brake lines?
Standard line wrenches and a brake bleeder kit are all that is required. No flaring or special fittings are needed.
Can these lines handle track use on a Contour SVT?
The 500 F heat range of the lines in kit 12324 makes them well-suited for track day and spirited driving applications.
How long is the warranty on Goodridge brake lines?
Goodridge provides a limited lifetime warranty on their stainless steel brake lines.
Installation Instructions
- Safely lift and support the vehicle, then remove the wheels for access to the brake lines
- Have a catch container ready and crack open the brake bleeder screws to relieve system pressure
- Use a proper line wrench to loosen and remove the factory rubber brake hoses from the hard line and caliper connections
- Thread in the new Goodridge 12324 stainless lines hand-tight, ensuring proper routing without kinks or contact with suspension or exhaust components
- Torque all fittings to manufacturer specification using a line wrench
- Reinstall the wheels and lower the vehicle
- Bleed the brake system completely starting from the corner farthest from the master cylinder
- Verify firm pedal feel before driving and check all connections for leaks after a short test drive
Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Brake Line Kits
Brake line kits and stainless steel brake lines for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop front brake line kits, rear brake line kits, full vehicle brake line sets, braided stainless lines, DOT approved lines, banjo fitting lines, and vehicle specific replacement lines for Hellcat, Trackhawk, TRX, HEMI, Coyote, and import platforms from Rotora, Goodridge, ISR Performance, StopTech, and Black Ops Auto Works. Every brake line kit is filterable by year, make, model, trim, engine, and drivetrain so the correct length, fitting size, and routing ships the first time. Black Ops Auto Works carries 647 brake line kit SKUs across front, rear, and full vehicle categories. What This Collection Covers Brake lines carry pressurized brake fluid from the master cylinder and ABS module to each caliper. Factory rubber brake lines expand slightly under hard braking pressure, which creates a small amount of pedal sponginess. Stainless steel braided lin...
View Brake Line Kits Products
Brakes
Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...
View Brakes Products
Goodridge
Goodridge braided stainless lines and fluid transfer parts for import, domestic, and motorcycle platforms are stocked at Black Ops Auto Works. Shop direct fit brake line kits, clutch lines, fuel hose, PTFE hose, fittings, adapters, brake fluid, and custom length bulk hose for Honda, Acura, Subaru, Nissan, Toyota, Mazda, BMW, Porsche, Lexus, Mitsubishi, Ford, and other performance platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct line kit ships the first time. Black Ops Auto Works carries 369 Goodridge SKUs across brake lines, clutch lines, fuel lines, fittings, and fluid. What This Brand Covers Goodridge is a British manufacturer of braided stainless steel brake lines, clutch lines, and fluid transfer hose that has supplied motorsport and OEM performance programs since 1965. The brand's PTFE lined, stainless braided construction replaces the factory rubber hose used on nearly every production vehicle, eliminating the line ex...
View Goodridge Products