-15%
Click to zoom in
Product Overview
H&R 28500-1 is the exact Sport Spring kit described below. Its dimensions and application have been cross-checked against H&R's current manufacturer information.
Key Features
- Approximately 1.0-inch lowering at the front and rear.
- Designed to reduce body roll and sharpen handling.
- Maintains compatibility with original-equipment components in the stated application.
- Progressive-rate design where application geometry permits.
Fitment
| Years / Basis | Make / Pattern | Model / Bore | Configuration |
|---|---|---|---|
| 2026 | Honda | Prelude BF1 | Original-equipment damper configuration |
Select 28500-1 only after confirming every vehicle, wheel, hub and suspension detail relevant to the part.
Specifications
| Detail | Value |
|---|---|
| Manufacturer part number | 28500-1 |
| Series | Sport Spring |
| Approximate front lowering | 1.0 in |
| Approximate rear lowering | 1.0 in |
| Manufacturing | Made in Germany |
| Quantity | Vehicle set |
What's Included
The 28500-1 package includes the H&R component set supplied for this exact configuration. Related wheels, tires, dampers or alignment hardware are separate unless specified.
About H&R
H&R develops vehicle-specific suspension, spring and wheel-fitment components. Current manufacturer application data should be checked before installation.
Related Parts
Browse related H&R suspension and wheel-fitment parts. Confirm each part independently.
Frequently Asked Questions
What is the 28500-1?It is the exact H&R Sport Spring kit in this listing.
Is vehicle fitment universal?No. Use only the verified vehicle application shown above.
Does the vehicle year alone confirm fitment?No. Confirm chassis, wheel, hub, suspension and package details.
Is professional installation recommended?Yes. Wheel retention, spring and alignment components should be installed and checked by a qualified technician.
Does the package include unrelated components?No. Only the exact manufacturer package for this configuration is included.
Should alignment or torque be checked?Yes. Follow H&R and vehicle procedures, then recheck torque and alignment after installation.
Where are current application details?Use the official H&R page linked below before ordering and installing.
What should be inspected after installation?Inspect seating, clearance, fastener torque, tire clearance and alignment after initial use.
Installation
Review the official H&R information for 28500-1.
- Confirm the exact application and all dimensions.
- Inspect mating surfaces and inventory the package.
- Install using H&R and OEM procedures with the specified torque values.
- Check clearance through the full steering and suspension range.
- Complete alignment where applicable and recheck after initial use.
California Proposition 65 Information
Review the manufacturer's current product documentation and applicable California warning requirements before installation.
H&R
Shop H&R lowering springs, lift springs, coilovers, sway bars, suspension components, Trak+ wheel spacers, adapters, bolts, studs, and lug nuts by exact manufacturer part number and verified application.Choosing the Correct H&R Part Match the exact H&R manufacturer part number and package quantity Confirm year, make, model, trim, drivetrain, axle load, body style, and factory suspension Check the stated ride-height range and required shock or electronic-damper provisions Match wheel adapters by both bolt patterns, both center bores, thickness, thread pitch, attachment method, and supplied hardware Verify wheel hardware length, diameter, thread pitch, seat type, engagement, and clearance Related Collections H&R products Lowering springs Coilovers Sway bars Frequently Asked QuestionsHow do I confirm an H&R suspension part fits my vehicle?Match the exact part number and canonical year, make, and model, then confirm trim, drivetrain, axle load, body style, factory su...
View H&R Products
Lowering Springs
Shop lowering springs from Eibach, H&R, Swift Springs, RS-R, UMI Performance, MaxTrac, aFe Control, Ford Racing, Whiteline, Vogtland, ST Suspensions, Belltech, Skyjacker, and Black Ops Auto Works. Find sport lowering springs, Pro-Kit springs, Sportline springs, Spec-R springs, Super Sport springs, Race springs, Down Sus springs, adjustable lowering springs, SUV lowering springs, truck lowering springs, and EV lowering springs for street cars, muscle cars, sport compacts, European performance platforms, SUVs, trucks, and modern EV builds. Lowering springs are the simplest way to drop a vehicle’s ride height. They keep the OE shocks, upper mounts, and suspension geometry components in place and swap only the coil springs for shorter, progressively- or linearly-wound performance springs. Shop by vehicle year, make, model, trim, drop height, spring type (progressive vs linear), and application (street, show, mild-handling, SUV, EV, truck). Lowering springs are the correct choice...
View Lowering Springs Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products