H&R Trak+ 25mm DRA Wheel Adaptor Bolt 5/112 Center Bore 57.1 Bolt Thread 14x1.5

Find Audi 100 parts by chassis generation, engine code, body and drivetrain. Separate earlier cars from later 2.8-liter applications before selecting brakes, suspension service items or engine components. Audi 100 Chassis and Engine Identification Start with the vehicle identification, chassis generation and engine code. Record sedan or Avant body, transmission and front-wheel drive or quattro configuration. Registration year and the Audi 100 badge alone may not identify the exact component application. Check modifications and existing part numbers where the engine, brakes or suspension have been changed. A 2.8-liter listing should not be extended to an earlier five-cylinder or diesel application. Match the specific vehicle details in the manufacturer’s coverage. Brake Rotors, Pads and Hardware Current listings include EBC front rotors naming 1992–1994 Audi 100 2.8 applications. Confirm year, engine, drivetrain and installed brake assembly before comparing a replacement. Match diame...

Find Audi 100 Quattro parts by chassis, engine code and all-wheel-drive application. Confirm the exact brake and suspension equipment before ordering service components. Later applications require their own fitment checks. Quattro Chassis, Body and Engine Details Record vehicle identification, generation, engine code, transmission and sedan or Avant body. Use explicit quattro coverage for drivetrain and chassis components. A front-wheel-drive Audi 100 listing does not establish an equivalent all-wheel-drive application. Include wheel changes, brake conversions and suspension modifications. Confirm the parts actually installed rather than relying only on original build details. Model-year ranges printed in product titles must be checked against complete manufacturer coverage. ATE Brake Pads and Front Rotors The catalog includes an EBC Redstuff front-pad listing naming Audi 100 Quattro 2.8 with ATE equipment, plus Audi 100 2.8 front-rotor listings. Verify exact year, engine, caliper a...

Find Audi 200 parts by model year, engine code, valve configuration and drivetrain. Check the installed brake assembly before comparing pads, rotors or hardware. Audi 200 Engine and Drivetrain Details Record chassis, engine code, turbo specification, transmission and front-wheel drive or quattro configuration. Audi’s historical material identifies a distinct 200 quattro 20V application; do not assume every Audi 200 uses the same engine or brake equipment. Identify sedan or Avant body and include any engine, hub or brake conversion. Match current component numbers to the detailed manufacturer application. ATE and Other Brake Applications Current listings include an EBC front-pad listing naming 1989–1991 Audi 200 2.2 Turbo with ATE equipment. Confirm exact year, engine, installed caliper, pad shape and rotor specification before selecting a compound. Choose Audi 200 brake components by chassis, installed assembly and axle. Review required hardware and the compound’s stated street or c...

Find Audi 200 Quattro parts by chassis, engine code and installed brake equipment. Distinguish turbo and valve-configuration details before selecting chassis or service components. Identify the Exact 200 Quattro Application Provide the vehicle identification, year, engine code, transmission and sedan or Avant body. Audi’s historical material describes a distinct 200 quattro 20V engine application. Verify the complete engine and chassis details rather than treating every 200 Quattro as one unchanged specification. Record engine, brake, hub or suspension conversions. Original build details identify factory equipment, while current component numbers establish what is fitted now. Use explicit quattro coverage where the drivetrain affects the part being selected. Brake Calipers, Rotors and Pad Shape Choose Audi 200 Quattro brake components for the caliper and rotor assembly actually installed. Use chassis information and existing component numbers to establish the application before comp...

Find Audi 5000 parts by generation, engine code, body and drivetrain. Distinguish earlier cars from later turbo and quattro configurations before selecting wheel hardware, ignition or chassis components. Audi 5000 Vehicle and Engine Identity Record vehicle identification, exact year, engine code, fuel type, transmission and sedan or wagon body. Confirm front-wheel drive or quattro where relevant. The model name alone does not identify the original engine, brake or wheel specification. Include any engine, wheel, hub or suspension conversion. Original build information and the components now installed may differ. Wheel Bolts, Hub Dimensions and Driveshaft Parts The catalog includes McGard radius-seat wheel locks and H&R wheel-hardware listings with different bolt-pattern and dimensional descriptions. Match the actual wheel and hub, thread, seat, engagement and clearance. A 4/108 listing and a 5/112 listing do not establish identical fitment. A JXB large-chassis driveshaft-support ...

Find Audi 5000 Quattro parts by chassis, engine code, body and installed equipment. Match all-wheel-drive applications individually when selecting wheel hardware, ignition or engine service components. Turbo Quattro Vehicle Identification The original 1987 Audi brochure identifies the 5000 CS Turbo quattro with permanent all-wheel drive and anti-lock braking. Confirm exact year, engine code, gearbox and sedan or wagon body before choosing parts. Do not apply one brochure specification to every vehicle without checking its build and service information. Include wheel, engine, brake and suspension changes. Use actual installed component numbers where previous work has altered the original specification. A front-wheel-drive Audi 5000 listing does not establish a quattro chassis application. Wheel Locks and Hub Hardware McGard wheel-lock listings specify a radius seat and particular thread and shank dimensions. H&R listings include different bolt patterns, center bores and thickness...

Explore Audi A3 parts with attention to generation, body style, engine and drivetrain. Compare intake, exhaust, brake and suspension-service applications against your exact configuration. Match the A3 Generation and Powertrain Identify the chassis generation, model year, body, engine code and transmission. Record front-wheel drive or quattro, and distinguish gasoline, diesel and plug-in hybrid applications where relevant. A3 hatchback, sedan and cabriolet components should be checked individually. Include production-date restrictions and any intake, turbo, brake or suspension changes. Similar Audi/VW platform names are useful search details, but the full manufacturer application must match the installed vehicle and assembly. Intake and Exhaust Selection The selection includes an AWE 8P A3 front-wheel-drive resonated cat-back exhaust. Confirm that specific drivetrain, body, engine and connection layout before ordering. An 8P FWD application does not establish coverage for quattro or ...

Find Audi A3 Quattro parts by generation, body, engine code and all-wheel-drive application. Compare intake, braking and suspension-service components against the exact installed equipment. Identify the Quattro Configuration Record chassis generation, model year, body, engine code and transmission. Include production date and any changes to the turbocharger, intake, brakes, wheels or suspension. The quattro name does not establish one universal component specification across all A3 versions. Distinguish A3 applications from S3, RS3 and other Audi models. A shared platform or engine displacement can help narrow a search, but detailed manufacturer coverage and installed assembly details determine the correct part. Airflow and Engine-Related Components The selection includes Injen intake and turbo-inlet listings, an AWE breather filter and a Fluidampr damper listing. Verify complete engine-code coverage, generation, sensing arrangement and connection dimensions. Front-wheel-drive-only ...

Explore Audi A4 parts and accessories by generation, engine, body and drivetrain. Compare exhaust, intake, engine and brake applications against your exact configuration. Later A4 generations require their own checks. Identify Your A4 Platform and Equipment Record chassis generation, model year, body, engine code and transmission. Confirm front-wheel drive or quattro and any production-date restrictions. Sedan, Avant and cabriolet applications should be checked individually, particularly where body clearance or exhaust routing changes. Include previous turbo, intake, engine, brake or suspension modifications. Existing component numbers help confirm the installed assembly. Exhaust and Intake Applications The selection includes AWE B8 A4 Touring Edition exhausts with single-side and quad-tip configurations, plus a listing excluding cabriolet. Match engine, drivetrain, body and rear-valance layout. A B9 Touring-to-Track conversion kit requires its specified existing exhaust system. Inj...

Find Audi A4 Quattro parts by chassis generation, engine code and body configuration. Compare all-wheel-drive exhaust, intake, engine and brake applications with the actual installed equipment. Confirm the Quattro Chassis Application Start with the model year, generation, body, engine code and gearbox. Confirm the drivetrain and any relevant build-date restrictions. A4 Quattro applications span different platforms and engines; the badge does not establish one universal component specification. Describe modifications affecting the component being selected, including turbo, exhaust, brakes and suspension. Distinguish A4 from S4 and allroad applications. For a converted car, identify the installed assembly and supporting components in addition to the original vehicle details. Exhaust Systems and Airflow Components An AWE Touring Edition listing explicitly names B8/B8.5 A4 Quattro 2.0T with quad tips. Confirm the detailed year range, body coverage and rear-valance requirements. Other B8...

Explore Audi A6 parts by generation, body, engine code and drivetrain. Compare intake, engine-service and braking applications against the actual installed equipment. Earlier and later generations require their own checks. Identify the A6 Engine and Chassis Confirm sedan or Avant body and front-wheel drive or quattro as applicable. Distinguish conventional A6, S6 and allroad applications before comparing chassis or engine components. Include previous turbo, engine, intake, brake or body modifications. Installed component numbers help confirm the current assembly. Intakes and Engine-Related Components Injen intake listings separately name 2012–2015 and 2016–2018 A6 2.0L turbo applications. Match the complete engine-code coverage, sensing arrangement, mounting and hose connections. These titles do not establish coverage for every V6 or other A6 powertrain. Fluidampr listings include several engine families; a Vibrant manifold-flange listing names Audi 2.7T, while injector listings nam...

Find Audi A6 Quattro parts by generation, engine code, body and transmission. Compare exhaust, intake, engine and brake applications against the exact all-wheel-drive configuration. Other generations need separate identification. Identify the A6 Quattro Powertrain Confirm sedan or Avant body, and distinguish A6 from S6 and allroad applications. Include build-date restrictions and any engine, turbo, supercharger, exhaust or brake conversions. Match the installed assembly using component numbers and service records. Exhaust, Intake and Cooling Applications AWE listings include C7.5 A6 3.0T quad-outlet exhausts and a separate 2019–2023 C8 A6/A7 3.0T cat-back listing. Confirm engine, generation, body, connections and rear-valance requirements. C7 and C8 product applications should be checked independently. Airflow listings include C7 3.0T intake references, A7 supercharged-engine Injen titles and A6 2.0L turbo intakes. An earlier 2.7T intercooler listing is another distinct application....

Find Audi A8 parts by generation, engine code, wheelbase and installed brake equipment. Compare service and accessory applications against the exact luxury sedan configuration. Other generations and powertrains need separate checks. Identify Your A8 Specification Confirm standard or long-wheelbase body and any hybrid designation where applicable. Distinguish A8 from S8 applications before comparing engine, brake or suspension components. Include conversions affecting brakes, wheels, engine or chassis equipment. Use actual component numbers alongside vehicle identification. The A8 name does not establish one unchanged platform, brake system or engine specification across all years. Brake Pads, Rotors and Hardware Match the precise year, engine and brake option codes. For Audi A8 performance hardware, identify the exact engine and fueling system, controls and required supporting components. Review the manufacturer’s application and installation plan with the installer before ordering ...

Find Audi A8 Quattro parts by generation, engine, wheelbase and brake specification. Compare rotors, pads and service hardware against the exact all-wheel-drive sedan. Later applications require separate identification. Confirm the A8 Quattro Configuration Identify standard or long-wheelbase body and actual chassis equipment. Distinguish A8 from S8 and other Audi applications before selecting brake, engine or suspension components. Include wheel, brake and drivetrain modifications. Use installed assembly numbers where equipment differs from the original specification. Front and Rear Brake Applications DFC listings separately name A8 front and rear rotor applications, with different year ranges. Hawk also lists a 2016 A8 front-pad reference. Match brake option codes, axle, caliper, rotor diameter, thickness and hub arrangement before ordering. A DFC A8 rear ceramic-pad and hardware listing requires its own exact coverage check. Verify pad shape, quantities and included clips or fitti...

Find Audi Q3 parts by generation, engine, drivetrain and brake specification. Compare rotor, pad and service-component applications with the exact vehicle. Later generations and RS Q3 require separate checks. Confirm the Q3 Generation and Equipment Include brake option codes and changes to wheels or suspension. Q3 styling, trim and engine badges do not establish one universal set of mechanical components. Check front-wheel drive or quattro explicitly. Distinguish Q3 from RS Q3 and other Audi compact platforms. Use vehicle identification and installed component numbers to resolve application differences before choosing parts. Brake Rotors, Pads and Kits DFC listings include Q3 front and rear rotor references with broad date ranges. Match generation, axle, brake option, rotor diameter, thickness and mounting dimensions. Verify pad shape, caliper and sensor provision before comparing a pad compound or kit. Compare EBC and Hawk brake kits by the exact Q3 application and axle coverage. R...

Find parts for the classic Audi Quattro by exact year, engine code and installed equipment. Confirm each brake or service-component application against the original model. Identify the Classic Quattro Model Distinguish the classic Quattro coupe from later Audi vehicles carrying the quattro drivetrain badge, the separately named Coupe Quattro and short-wheelbase Sport Quattro. Document engine, brake, suspension and wheel changes. Use installed component numbers alongside original vehicle identification. On a modified classic, the actual assembly may differ from its original specification and needs an individual application check. Brake Applications Need Exact Assembly Details Choose classic Quattro brake components for the installed caliper, axle and rotor assembly. Use chassis and component numbers to establish the exact application before selecting pads, discs or hardware. Check axle, caliper, pad shape, rotor diameter, thickness and hub details. Motorsport pad references for named...

Find Audi RS3 parts by generation, engine, body style and existing equipment. Compare intakes, exhaust systems, conversion components and brake applications individually. Identify the RS3 Generation and Body Distinguish the RS3 road car from RS3 LMS race applications and other Audi compact models. Include intake, turbo, exhaust and brake modifications. Use exact manufacturer year coverage and production-date notes. Intakes, Inlet Couplers and Exhaust Systems AWE S-FLO listings include open, closed and shortie intake configurations plus a separately listed inlet coupler and a diverter-valve adapter for stated later applications. Check engine generation, existing turbo inlet, required adapter and supplied pieces before choosing a setup. AWE and MBRP exhaust listings distinguish 2017–2020 8V applications from 2022+ 8Y systems. Match sedan or Sportback body, valved or non-valved arrangement, tip configuration and existing system. A conversion kit changes a specified compatible system; i...

Shop Audi S3 parts by 8V or 8Y generation, engine application and driving use. Compare exhaust sound, induction connections and brake equipment before choosing an upgrade or service part. Exhaust Sound and System Scope AWE S3 exhaust applications distinguish 8V and 8Y systems and offer different Touring, Track or SwitchPath configurations. Compare the manufacturer’s sound description, resonator arrangement and valve operation for the exact system. Check tip size and finish alongside pipe routing and kit contents. A valve simulator or conversion section is a separate component, so establish which original or aftermarket system it requires. Induction and Brake Selection For an intake or turbo-inlet pipe, match the engine generation, turbo connection and emissions-related fittings. Confirm whether a breather filter or adapter is part of the kit rather than adding components by appearance. S3 brake applications vary by generation and equipment. Use the caliper, rotor size, axle and pad ...

Find Audi S4 parts with the engine and chassis generation established first. B8/B8.5 and B9 intake, cooling and exhaust applications have different hardware and installation requirements. Cooling and Intake by Powertrain Separate B8/B8.5 3.0T intake and heat-exchanger applications from B9 3.0T intercooler applications. A heat exchanger and an intercooler are not interchangeable purchases; identify the system and connections being upgraded. AWE S-FLO and AirGate selections use generation-specific housings and connections. Compare the complete intake, service filter and any required adapters as separate parts of the installation. Build the Exhaust Around Your Existing Setup S4 exhaust choices include Touring and Track configurations, resonated or non-resonated sections and different tip sizes. Match the body and generation before deciding on sound and appearance. Conversion kits require a compatible existing AWE system and can specify 90 mm or 102 mm tip configurations. Review the kit...

Find Audi S6 parts by generation and powertrain. C7/C7.5 4.0T and C8 2.9T applications require different induction and exhaust hardware; brake equipment deserves a separate check. Match Intake and Exhaust to the Engine C7 S6 4.0T applications include AWE S-FLO intake and Touring or Track exhaust choices. C8 2.9T exhaust applications are listed separately. Establish the exact engine and market specification before comparing these systems. Consider the whole exhaust when choosing sound: resonator arrangement, valve operation, tip configuration and existing modifications all matter. Review conversion parts against the compatible starting system. Service Parts for the Installed Equipment Choose brake pads by caliper, axle, pad shape and rotor material. A rear pad application does not resolve front-pad fitment or the need for a separate wear sensor. For intake maintenance, distinguish a service filter from a complete housing and inlet kit. Match the filter to the installed intake, especi...

Find Audi S8 parts by generation, engine and installed brake equipment. The same model name spans different chassis and powertrains, so service components need a precise application match. Identify the S8 Equipment Before Service Record chassis generation, engine code, gearbox and factory brake option. Include any caliper, rotor or suspension changes in the service plan. Part numbers from installed assemblies can help resolve a modified car. Choose engine and transmission service products by the required approval or specification, not viscosity alone. A service fluid must suit the particular system; engine oil, automatic-transmission fluid and axle lubricant serve different assemblies. Pads, Rotors and Wear Sensors S8 brake-pad applications distinguish earlier cars from later generations. Match pad shape, caliper, axle and rotor material before comparing street compounds or competition options. A pad kit may not contain sensors or all fitting hardware. Confirm the sensor connector a...

Find Audi TT parts by generation, engine and drivetrain. Intake, crankshaft-damper and brake applications can distinguish early 1.8T cars from later engines and front-wheel drive from quattro. Engine and Intake Details An early TT intake application can specify the 180 hp engine configuration. Match the engine code, airflow-meter connection, inlet routing and supplied hardware rather than assuming every 1.8T setup uses the same kit. Crankshaft dampers have engine-specific mounting patterns. Fluidampr applications distinguish four-bolt and six-bolt arrangements among engine families; verify the exact engine, pulley arrangement and supplied installation requirements. Drivetrain and Brake Configuration Suspension components can exclude quattro applications. Establish front-wheel drive or quattro before selecting mounts, boots or other chassis parts, and check the axle and suspension configuration. For brakes, identify caliper, rotor dimensions and pad shape before choosing a street or ...

Choose Audi TT quattro parts around the all-wheel-drive chassis and exact engine application. Induction components, dampers and brake equipment need generation-specific coverage. Intake Connections and Engine Hardware TT quattro applications span different engines and intake arrangements. Early intake references may specify a 180 hp configuration, while later turbo-inlet applications depend on engine generation and the installed turbo connection. For crankshaft dampers, match engine code, mounting pattern and pulley layout. A 1.8T, 2.0 FSI/TSI or other engine reference does not establish a common damper assembly. All-Wheel-Drive Chassis and Brakes Use quattro-specific coverage for drivetrain and suspension service. Record transmission, installed shaft components and suspension type where those details are part of the manufacturer’s application. Match rotors, pads and hardware by axle, caliper and dimensions. For a modified brake setup, the installed caliper and rotor assembly take p...

Shop Audi TT RS quattro parts for the 2.5T powertrain, exact generation and body. Compare intake configurations, inlet couplers, exhaust systems and brake equipment as coordinated choices. Intake Configurations and Inlet Couplers AWE S-FLO choices include open, closed and Shortie configurations for specified TT RS applications. Review the filter, housing and inlet components supplied with each configuration. A separately listed turbo-inlet coupler or diverter-valve adapter is not a complete intake. Confirm the existing turbo connection and the stated model-year requirements before adding companion parts. Exhaust Systems and Brake Options AWE 8S/Mk3 TT RS exhaust applications distinguish complete Track or SwitchPath systems from conversion kits. Establish Coupe or other body coverage, valve operation, tip configuration and the required starting system. Brake selection needs generation, caliper, rotor material and axle. Choose pad compound according to street or competition use, retai...

Explore Audi TTS quattro parts for the 2.0T engine and all-wheel-drive chassis. Match induction and engine hardware to the exact generation, and build brake-service choices around the installed equipment. Engine and Induction Details Turbo-inlet and breather-filter applications depend on engine generation and connection layout. Compare the existing turbo inlet, intake housing and ventilation fittings with the manufacturer’s required setup. A crankshaft damper needs the correct engine and mounting arrangement. Verify bolt pattern, pulley layout and installation hardware rather than selecting a part from a broad TSI reference alone. Brakes and Chassis Service Choose a rotor-and-pad kit by caliper, rotor diameter and thickness, pad shape and axle. Confirm exactly what a kit contains, including whether sensors and fitting hardware are supplied. For chassis work, use TTS quattro coverage and record the suspension equipment. Electronic damping or previous suspension changes can affect the...

Choose Bentley Continental parts by full model designation, generation and engine. Classic Continental applications and later GT or GTC models require different body, brake and service-component selections. Identify the Continental Model Record whether the car is a classic Continental derivative, GT coupe or GTC convertible, then add model year, engine and chassis details. Include hybrid status where applicable. A modern engine-family component and a classic 6.75L service part are different applications. Use engine identification and original or installed component numbers to resolve the required part. Brakes, Ignition and Body Service Choose pads and sensors against the fitted caliper, rotor material and axle. For ignition work, confirm coil connector and plug dimensions, heat range and gap for the exact engine. Body and visibility items also need their own match. Compare wiper length and arm connection, and confirm body-specific mounting for accessories rather than using the Conti...

Shop H&R lowering springs, lift springs, coilovers, sway bars, suspension components, Trak+ wheel spacers, adapters, bolts, studs, and lug nuts by exact manufacturer part number and verified application.Choose Your Part Match the exact H&R manufacturer part number and package quantity Confirm year, make, model, trim, drivetrain, axle load, body style, and factory suspension Check the stated ride-height range and required shock or electronic-damper provisions Match wheel adapters by both bolt patterns, both center bores, thickness, thread pitch, attachment method, and supplied hardware Verify wheel hardware length, diameter, thread pitch, seat type, engagement, and clearance Related Collections H&R products Lowering springs Coilovers Sway bars Frequently Asked QuestionsHow do I confirm an H&R suspension part fits my vehicle?Match the exact part number and exact year, make, and model, then confirm trim, drivetrain, axle load, body style, factory suspension, electronic ...

Shop Volkswagen Atlas floor protection, window and engine-accessory applications by exact production, seating layout and engine. Keep cabin-row and Cross Sport body requirements separate. Passenger Rows and Cargo Coverage Third-row liners, front/second-row packages and trunk liners protect different areas. Confirm exact seating/load-floor arrangement, contours and retention points. Hood protectors and window deflectors require precise body/year coverage. An unrelated cargo-liner heading or shared Cross Sport name does not establish Atlas fit. Engine and Suspension Accessories Turbo inlets and dampers require the exact installed engine and complete connection/crank-drive support. Do not extend a TSI component to another engine by model naming alone. Passat/Jetta helper springs need independent Atlas spring/mount application support. Review complete kit contents and current suspension equipment before ordering. Choose Your Part Identify production, seating layout and actual engine. S...

Find Volkswagen Beetle cabin, exterior and engine-accessory applications by exact generation and engine. Keep classic, New Beetle and later body requirements distinct. Generation-Specific Cabin and Window Fit Classic stainless window shades and later outside-mounted deflectors have different body/year coverage. Confirm window geometry and mounting design. Front liners require exact cabin contours and retention points. A shared Golf/Jetta reference needs precise Beetle manufacturer support. Engine, Damper and Suspension Applications The displayed 1.8T four-bolt damper and later TSI references are separate applications. Match actual engine, crank attachment and accessory-drive arrangement. Diesel intakes, throttle controllers and helper springs require their own engine, connector or mounting coverage. Do not extend Golf/EOS/GTI naming to every Beetle configuration. Choose Your Part Identify generation, body and actual engine. Match liner retention and window geometry. Confirm exact d...

Find Volkswagen CC intake, damper, fuel and brake applications by exact engine and production. Separate TSI and VR6 requirements before choosing shared Audi/VW references. Engine and Fuel-System Interfaces A GTI intake needs exact CC engine, sensor, turbo/inlet and mounting support. Dampers separately require matching crank attachment and accessory-drive configuration. VR6 12-valve injector references need the actual engine, fuel rail, connector and calibration support. Honda or Subaru injector headings are not evidence of CC compatibility. Brakes and Suspension Accessories Match rotor diameter/thickness, caliper and axle before choosing a Talon or other rotor. Confirm exact manufacturer part-number coverage. EOS/GTI helper springs require independent CC spring/mount support. Pedal controllers need exact vehicle/connector and selected control-kit coverage. Choose Your Part Identify production and actual TSI/VR6 engine. Match intake/damper and fuel-system interfaces. Confirm injecto...

Find Volkswagen e-Golf brake and suspension-service applications for exact electric-model production and equipment. Require confirmed e-Golf coverage before selecting shared Audi or combustion-Golf references. Electric-Model Brake Package Match actual caliper, pad profile, rotor dimensions and axle. A GTI, Audi A3 or TT heading does not establish all e-Golf applications. Hardware and friction packages have different contents. Confirm each exact part number and separately required clips or components. Mounts and Brake Hoses Front mounts need matching suspension geometry, dimensions and supplied bearing/hardware support. Confirm electric-model coverage rather than platform naming alone. Hoses require exact connections, length and routing. Review installation requirements for the actual axle/side and brake assembly. Choose Your Part Identify exact electric-model production and brake equipment. Match caliper, rotor dimensions and axle. Verify mount geometry and included hardware. Confi...

Find Volkswagen Eos engine-accessory, brake and suspension applications by exact production and engine. Confirm FSI, TSI and other engine configurations independently. Crank and Pulley Interfaces Six-bolt FSI, later TSI and other damper references require exact engine/crank support. Match pulley alignment, accessory drive and required installation hardware. Do not extend a broad Golf/Passat/Audi title to every Eos engine. Use actual engine code and current component identification. Brakes and Helper-Spring Applications Confirm caliper, rotor dimensions and axle for every included pad/rotor kit component. Another VW/Audi heading needs exact manufacturer coverage. Helper springs and protective boots need correct mount, position and dimensions. Review actual suspension and complete package contents before planning installation. Choose Your Part Identify production and actual engine code. Match crank attachment and accessory-drive configuration. Verify all brake-kit caliper/rotor appli...

Find Volkswagen EuroVan brake, ignition and engine-accessory applications using exact production and installed engine. Confirm complete fuel-system and wheel interfaces before ordering shared VW references. Engine and Fuel-System Specification A VR6 12-valve injector set requires that exact engine, rail, connector and calibration support. Confirm complete installation requirements with the tuner. BKR5EKU and BKR5EKUP plugs need their own exact engine specification. Oil filters and engine oil require matching replacement interfaces and required viscosity/approval. Brakes and Wheel Spacers Rear pads and rotors explicitly naming specific EuroVan years still need current caliper/dimension confirmation. Hardware must match the actual axle and brake assembly. DR spacers need complete bolt-pattern, centre-bore, fastener-length and clearance checks. A 5x112 Audi title or similar hub measurement alone is insufficient. Choose Your Part Identify production and actual engine/fuel system. Match...

Shop Volkswagen Golf Alltrack exhaust, intake and brake applications by exact production, engine and 4MOTION equipment. Confirm each system’s configuration and installation requirements before ordering. 4MOTION Exhaust and Sound Choices The displayed AWE wagon system targets the supported Alltrack/SportWagen 4MOTION application. Review exact year, rear outlet configuration and current downpipe before selection. Touring includes drone-control technology while Track has a more pronounced sound character. Choose application and complete contents before tip finish. Intake and Service Components Inlets and intakes require exact engine generation, turbo, sensor and hose support. A 2.0T GTI title should not establish every Alltrack application. Brake kits need matching axle, caliper, rotor and each included part number. A breather filter is an accessory for a specified system rather than a complete intake. Choose Your Part Identify production, engine and 4MOTION configuration. Confirm exa...

Shop Volkswagen Golf exhaust, intake and cabin-service applications by exact generation, engine and body. Keep 1.8T, 2.0T, 2.5-litre and diesel requirements separate. Engine-Specific Exhaust and Intake A 2.5-litre Golf/Rabbit exhaust and a Mk7 1.8T system are different applications. Match the engine, body and current connection points before comparing sound or finish. Intakes need exact sensor, turbo or naturally aspirated routing support. An ALH TDI reference should not be extended to gasoline engines. Damper and Cabin Interfaces Dampers require matching crank attachment, pulley and accessory drive. Confirm exact engine generation and manufacturer part number. Front liners need correct cabin contours, retention points and body/year coverage. Shared Beetle/Jetta naming does not establish every Golf interior fit. Choose Your Part Identify generation, engine and body configuration. Match exhaust and intake engine-specific interfaces. Confirm crank/pulley and complete damper applicati...

Shop Volkswagen Golf R exhaust and intake applications by Mk6, Mk7, Mk7.5 or Mk8 generation. Confirm sound-control configuration and compatible existing equipment before choosing a kit. Generation and Exhaust Configuration Touring, Track and SwitchPath are different configurations with generation-specific applications. Match the exact bumper/outlet arrangement, engine and manufacturer part number. A Track-to-Touring or other conversion kit changes a compatible starting system. Confirm generation, conversion direction and retained valve/control requirements rather than treating it as a complete exhaust. Intake and Supporting Interfaces Mk6 intake references need their own engine, sensors, turbo connections and mounting support. Do not extend them to later engines solely from Golf R naming. Choose tip finish and other options after application and contents are confirmed. Provide current exhaust/intake part numbers if the car has previously been modified. Choose Your Part Identify exa...

Find Volkswagen Golf SportWagen exhaust, intake and service applications using exact production, engine and drivetrain. Separate 4MOTION wagon systems from other SportWagen configurations. Drivetrain-Specific Exhaust The displayed Alltrack/SportWagen exhaust references specify 4MOTION support. Do not extend that system to another drivetrain without exact manufacturer coverage. Compare Touring and Track sound configuration, rear outlet requirements and existing downpipe. Match application and complete system contents before tip finish. Engine and Suspension Accessories Intakes and turbo inlets need exact engine generation, sensors, turbo connections and mounting support. A breather filter is separate from a complete intake. Helper springs and brake kits require their own chassis/mount or caliper/rotor checks. EOS/GTI or Audi headings do not establish every wagon application. Choose Your Part Identify production, engine and FWD/4MOTION drivetrain. Match exact wagon exhaust and outlet...

Shop Volkswagen GTI exhaust systems and conversion kits by Mk6, Mk7, Mk7.5 or Mk8 generation. Choose the sound configuration first, then the compatible tip finish and system contents. Touring or Track Exhaust Touring and Track offer different sound-control configurations. Compare cabin sound at cruising speed as well as acceleration, especially when the car already has an aftermarket downpipe. Match the engine, generation and rear bumper/outlet layout before ordering. A Mk7.5 system and a Mk8 system should not be selected solely because both carry GTI branding. Changing an Existing AWE System Track-to-Touring and Touring-to-Track kits change a compatible existing exhaust. Identify its manufacturer part number and the direction of the conversion. Check which sections and hardware are supplied and retained. A conversion kit is not a complete cat-back, and chrome or black tips do not determine chassis compatibility. Choose Your Part Identify GTI generation, engine and current downpipe...

Shop Volkswagen Jetta exhaust and cabin accessories by generation, body and engine. Keep GLI, 1.4T, 1.8T and 2.5-litre applications separate when comparing systems. Engine and GLI Exhaust Choices A Mk6 1.4T exhaust, a GLI 2.0T system and a 2.5-litre application have different requirements. Use the full manufacturer part number to confirm year, engine and body coverage. Compare Touring and Track sound configuration after establishing fit. For systems specifying an original downpipe, confirm the current exhaust connection before purchase. Conversion Kits and Cabin Coverage Touring-to-Track or Track-to-Touring sections require the matching starting exhaust. Check retained parts and conversion direction rather than treating the kit as a complete system. Floor liners need exact sedan or wagon coverage, cabin contours and retention points. A front-row set does not establish rear-row protection or fit in a different body. Choose Your Part Identify generation, sedan/wagon body and actual e...

Shop Volkswagen Passat engine-accessory, intake and cabin applications by production, engine and sedan or wagon body. Confirm the current powertrain and suspension equipment before selecting shared Volkswagen parts. Engine, Intake and Damper Interfaces A 2.5-litre intake and a Gen3 turbo inlet require different engine and air-path applications. Match sensors, hoses, turbo connection and mounting points. FSI six-bolt and TSI damper references require the correct engine/crank interface, accessory-drive alignment and installation hardware. Use the actual engine code when checking coverage. Mounts, Helper Springs and Liners A drivetrain stabilizer’s rubber or polyurethane configuration affects its intended setup. Confirm the exact mount location, application and supplied components. Helper springs need exact body and suspension coverage; wagon-specific support should not be extended to every sedan. Floor liners need matching cabin contours, retention points and row coverage. Choose Your...

Shop Volkswagen R32 engine-accessory and brake applications by generation and installed VR6 equipment. Verify the complete crank, pulley or brake-package configuration before choosing shared VW/Audi components. VR6 Damper Application A VR6 damper requires the exact engine, crank attachment and accessory-drive arrangement. Confirm pulley alignment and any required hardware with the manufacturer’s application and instructions. Golf, Passat and TT references may describe shared applications, but they do not establish fit for every R32 configuration or modified engine. Brake Packages and Suspension Protection Match pad profile, caliper, rotor diameter/thickness and axle for every brake-kit component. Select the friction compound for intended road or track conditions. Protective boots need the correct suspension position and dimensions. A non-quattro Audi reference should not be extended to R32 suspension without specific manufacturer coverage. Choose Your Part Identify generation, VR6 ...

Shop Volkswagen Rabbit exhaust, intake and service applications using generation, engine and body details. Keep 2.5-litre air-intake requirements separate from older Rabbit applications. 2.5-Litre Exhaust and Intake Choices The displayed Golf/Rabbit 2.5-litre exhaust needs the correct engine and body application. Review connection points, supplied sections and sound configuration. Intake options have different year and sensor requirements, including a no-MAF application. Confirm the actual air-metering arrangement, hoses and mounting before choosing a finish. Older Brake and Suspension Applications Wheel cylinders and master cylinders need exact chassis, bore, port and brake-system support. Pickup-specific hydraulic listings should not be assumed to fit every Rabbit body. Mounts and boots require matching suspension position, dimensions and production coverage. Check whether the package includes a mount, protective components or a complete assembly. Choose Your Part Identify genera...

Find Volkswagen Tiguan Limited brake and engine-accessory applications by exact production, engine and equipment. Use Limited-specific coverage rather than assuming interchange with every later Tiguan. Brake-Kit Coverage and Compound Match axle, caliper, pad profile and rotor dimensions for every kit component. A two-axle package must match both front and rear assemblies. Compare Ultimax, Greenstuff and Yellowstuff kit contents and intended use after fit is established. Rotor style and friction choice are separate decisions. TSI Damper Requirements A TSI damper needs the exact engine/crank interface and accessory-drive alignment. Check the manufacturer part number, required installation hardware and current engine configuration. Shared Golf, Passat or Audi naming does not establish all Tiguan Limited applications. Provide engine identification and existing modifications when checking a component. Choose Your Part Identify Limited production, engine and installed equipment. Match fr...

Shop Volkswagen Tiguan cabin protection, intake-accessory and brake applications by generation, engine and seating configuration. Keep Tiguan Limited and later Tiguan coverage distinct. Cabin Liners and Hood Protection Choose front-only or front-and-second-row liners to match the actual cabin and retention points. Confirm production and supplied pieces before planning coverage. An Aeroskin hood protector needs the exact hood profile and mounting instructions. Similar SUV styling does not establish fit across generations. Engine and Brake Applications Gen3 turbo inlets require matching engine, turbo connection, sensors and hoses. TSI dampers need their own crank and accessory-drive application check. Brake pads, rotors and race compounds must match actual calipers, dimensions and intended use. Helper springs require exact suspension support rather than shared EOS/GTI naming. Choose Your Part Identify generation, engine and seating/cabin arrangement. Choose liner rows and exact hood-...

Wheel spacers and wheel adapters for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop hub centric wheel spacers, bolt on and slip on spacers, wheel adapters that change bolt pattern, and forged aluminum spacers ranging from 5mm to 2 inch thickness for BMW, Audi, Volkswagen, Porsche, Subaru, Toyota, Ford, and Chevrolet platforms from Spidertrax, Motorsport Tech, ECS Tuning, and Black Ops Auto Works. Every wheel spacer and adapter is filterable by year, make, model, trim, bolt pattern, and hub bore so the correct thickness, offset change, and stud or bolt pattern ships the first time. Black Ops Auto Works carries 643 wheel spacer and adapter SKUs across bolt on, slip on, and adapter categories. What This Collection Covers Wheel spacers move the wheel outward from the hub to correct fitment issues like brake caliper clearance, fender clearance for wider tires, or a wider, more aggressive stance. Wheel adapters go a step further and change the bolt pattern entirely, ...

Shop aftermarket wheels, tires, lug nuts, wheel spacers, hub rings, TPMS sensors, valve stems, and wheel accessories at Black Ops Auto Works. Find performance wheels and tires for street cars, trucks, SUVs, muscle cars, imports, off-road vehicles, and custom builds from trusted automotive brands. Aftermarket Wheels for Cars, Trucks, and SUVs Choose cast, flow-formed, forged, replica, off-road, and performance wheels in a wide range of diameters, widths, offsets, finishes, bolt patterns, and center bores. Our selection supports applications from daily-driven vehicles and sports cars to lifted trucks, SUVs, drift builds, and track vehicles. Performance Tires for Street, Track, and Off-Road Use Shop tires for summer performance, all-season driving, winter conditions, touring, towing, off-road terrain, and high-performance applications. Match tire size, load rating, speed rating, tread design, compound, and seasonal use to the vehicle and driving conditions. Wheel Fitment, Offset, and ...