H&R Trak+ 30mm DRA Wheel Adaptor Bolt 5/112 Center Bore 66.5 Bolt Thread 12x1.5

Find Chrysler Crossfire parts with body and installed brake equipment recorded. Rotor, sensor and hose service requires exact axle references; door-conversion hardware has its own body and installation requirements. Brake Assemblies and Sensors Match rotors by diameter, thickness, hub attachment and caliper. Select pads against the installed assembly before comparing compound characteristics. Wear sensors and hoses require compatible connectors or fittings, routing and service position. Check included hardware and sensors separately from friction components. Door-Conversion Body Coverage A vertical-door conversion requires exact Crossfire body coverage and the manufacturer’s installation procedure. Confirm coupe or roadster application for the specific kit. Review hinge, support, mounting and wiring-accommodation requirements as a complete job. Conversion hardware is separate from replacement door shells or body panels. Choose Your Part Identify Crossfire production and body. Recor...

Shop H&R lowering springs, lift springs, coilovers, sway bars, suspension components, Trak+ wheel spacers, adapters, bolts, studs, and lug nuts by exact manufacturer part number and verified application.Choose Your Part Match the exact H&R manufacturer part number and package quantity Confirm year, make, model, trim, drivetrain, axle load, body style, and factory suspension Check the stated ride-height range and required shock or electronic-damper provisions Match wheel adapters by both bolt patterns, both center bores, thickness, thread pitch, attachment method, and supplied hardware Verify wheel hardware length, diameter, thread pitch, seat type, engagement, and clearance Related Collections H&R products Lowering springs Coilovers Sway bars Frequently Asked QuestionsHow do I confirm an H&R suspension part fits my vehicle?Match the exact part number and exact year, make, and model, then confirm trim, drivetrain, axle load, body style, factory suspension, electronic ...

Choose Mercedes-Benz 190E brake and project components using the exact engine, fitted calipers and current modifications. Routine service and EFI upgrades require different levels of application review. Brake Fit and Intended Use Compare caliper identification, pad backing shape, axle and rotor material before selecting friction components. Confirm the exact engine and equipment variant where the application distinguishes them. Race compounds such as DTC-60 and HT-10 need operating-use review. Follow explicit road-use restrictions and the required rotor preparation and bedding instructions. Sensors, Protection and EFI Projects For sensor wires, match connector, length, routing and the exact brake-system application. For strut boots, compare service position and required protective components separately. A universal EFI kit requires manufacturer review of the actual fuel-injection system, engine condition, fuel delivery and calibration. Do not assume that a generic EFI label establis...

Compare Mercedes-Benz 300CD wheel-spacing and brake-service options using exact chassis, wheels and installed brake equipment. Spacer fastening systems require separate hardware planning. DR and DRA Spacer Systems H&R DR spacers use the specified longer wheel bolts, while DRA systems attach to the hub using their supplied fasteners. Compare the exact system and complete kit instructions. Match bolt pattern, center bore, thread, wheel-bolt seat and required engagement. Check wheel/tire clearance and whether the stated width is per spacer or per axle before planning the final position. Brake Interfaces and Lighting Identify fitted calipers and pad backing shape, then compare hose fittings and sensor connectors independently. Package contents need a separate hardware check. For bulbs, verify exact electrical rating, base and lamp function. Resolve inconsistent descriptions using the manufacturer’s part specification. Choose Your Part Identify chassis, wheel specifications and curr...

Plan Mercedes-Benz 300CE wheel-spacing and EFI projects from the actual chassis, wheel and engine configuration. Neither a spacer dimension nor a universal EFI label establishes a complete application. Wheel-Spacer Configuration Compare exact DR or DRA system, bolt pattern, center bore and thread. Match wheel-bolt seat, engagement and mounting clearances to the manufacturer’s instructions. Record wheel size, offset and tire dimensions, then measure available clearance. Confirm whether the product width is stated per spacer or per axle and review all required hardware. EFI and Supporting Service Before choosing a universal EFI modification kit, have its manufacturer review the installed fuel-injection system, fuel delivery, engine condition, controls and calibration. Compare bottle-equipped and bottleless contents. For brake hoses, sensor wiring or strut boots, match fittings, connectors or service position separately. Protective boots are not a complete replacement suspension assemb...

Choose Mercedes-Benz 300D brake, suspension-service and wheel-spacing components by exact diesel chassis and installed equipment. Different generations require their own application checks. Brake and Suspension-Service Components Compare pad backing shape and caliper identification before choosing friction material. Match hose fittings and wear-sensor connectors as separate applications. For boots and bump stops, identify the fitted damper, service position and exact package contents. These protective pieces do not supply a complete replacement strut. Wheel-Spacer and Hardware Requirements For H&R spacer options, distinguish the fastening system and compare pattern, center bore, thread, bolt seat and engagement. Review the exact installation instructions and required bolts. Measure wheel/tire clearance using current wheel size and offset. Confirm width convention and package quantity before deciding on the final wheel position; bulb ratings require a separate electrical-specific...

Compare Mercedes-Benz 300E wheel-spacing and EFI project options using the exact chassis, engine and current modifications. Complete installation requirements matter more than a shared numeric model reference. Wheel-Spacer System and Hardware Identify DR or DRA fastening design and compare bolt pattern, center bore, thread and wheel-bolt seat. Confirm engagement, centering and mounting clearance using the exact kit instructions. Record wheel width, offset and tire dimensions. Measure body and suspension clearance and confirm whether the advertised spacer width is per piece or per axle. EFI Kit and Supporting Service A universal EFI kit requires confirmation for the actual injection system, fuel delivery, controls and calibration. Review engine condition and existing modifications with the manufacturer and installer. Compare bottle-equipped and bottleless packages by exact contents. Brake hoses and sensor wires need independent fitting, connector and service-position checks. Choose Y...

Choose Mercedes-Benz 300SE brake, ignition and wheel-spacing components using full chassis and installed engine identification. Shared model names can cover different equipment configurations. Brake and Ignition Selection Match pad backing shape, caliper and rotor material before choosing compound. Compare wear-lead connectors and service positions as a separate application. For spark plugs, confirm engine specification, thread, reach, seat, heat range and gap. Package quantity does not establish the complete engine service quantity. Spacer Installation Requirements Compare DR and DRA fastening designs, exact bolt thread, center bore and wheel-bolt seat. Review required hardware and engagement in the manufacturer instructions. Measure clearance using the actual wheels, offset and tires. Confirm width convention and package quantity before deciding the final wheel position. Choose Your Part Provide full chassis and engine identification. Compare pad and sensor applications separatel...

Plan Mercedes-Benz 300SEL brake and ignition service using the exact chassis and fitted engine. Wheel-spacing changes require a separate review of wheels, hubs and fastening hardware. Friction Components and Ignition Identify calipers, pad backing shape and rotor material before choosing friction compound. Wear leads need their own connector and routing application. For spark plugs, match thread, reach, seat, heat range and required gap to the installed engine. Record engine changes and check service quantity against the package. Wheel Fit and Spacer Contents For DR or DRA spacers, compare exact pattern, bore, thread, seat type and engagement. Do not treat differently threaded options as interchangeable. Measure clearance with actual wheel width, offset and tires. Confirm whether width is stated per spacer or per axle and review all required bolts and fastening instructions. Choose Your Part Identify chassis, engine and existing modifications. Match caliper, rotor and sensor specif...

Start Mercedes-Benz 300SL service and upgrade selection with the complete SL generation, chassis and engine. The name covers different configurations, so fuel-system and wheel applications need exact identification. EFI and Ignition Application A universal EFI modification kit must be approved for the actual injection system, engine condition, fuel delivery and calibration plan. A numeric badge or EFI label alone does not establish support. For spark plugs, match thread, reach, seat, heat range and specified gap. Review engine or ignition changes before choosing material or package quantity. Spacers and Supporting Hardware Compare exact DR/DRA fastening design, pattern, bore, thread, wheel-bolt seat and engagement. Confirm required bolts and whether width is stated per spacer or per axle. Measure wheel/tire clearance and review manufacturer instructions for the actual chassis. Brake-sensor wiring requires its own connector and routing application. Choose Your Part Identify SL gener...

Choose Mercedes-Benz 300TD brake and wheel-spacing components using exact diesel chassis and installed equipment. Spacer thread and axle restrictions need individual confirmation. Wheel-Spacer Interfaces and Restrictions Compare pattern, center bore, centering, bolt thread and seat. The displayed options include different threads; match the actual vehicle and wheel hardware rather than choosing by width. Respect any rear-only application and review DR/DRA fastening instructions. Measure wheel/tire clearance and confirm width convention and required fasteners. Brakes and Steering Damping Identify fitted calipers and pad shape before comparing friction material. Match intended use and manufacturer rotor-preparation and bedding guidance. For a steering damper, compare mounts, stroke and installation clearance independently of wheel or brake fit. Record changed steering or suspension components. Choose Your Part Identify diesel chassis and wheel specifications. Match exact thread, seat...

Plan Mercedes-Benz 300TE ignition and EFI projects from the installed engine and injection equipment. Wheel-spacing and lighting choices need separate interface and electrical checks. EFI Project and Ignition Specification Before selecting a universal EFI kit, obtain support for the actual injection system, fuel delivery, controls and calibration. Compare bottle-equipped and bottleless packages by exact contents. For spark plugs, match engine application, thread, reach, seat, heat range and required gap. Box quantity and advertised kit output are not substitutes for the actual service or project specification. Wheel-Spacer and Lighting Details For DR/DRA spacer options, compare pattern, center bore, thread, bolt seat and engagement. Review exact hardware and measure clearance with the fitted wheels and tires. For bulbs, verify voltage, wattage, base and lamp function. Confirm spacer-width convention and bulb package quantity independently. Choose Your Part Identify installed engine...

Compare Mercedes-Benz 350SL service and wheel-spacing components by exact SL chassis, engine and installed equipment. Different threads, axle restrictions and suspension exclusions need separate checks. Spacer Fastening and Axle Restrictions Match bolt pattern, bore, centering, exact thread and wheel-bolt seat. Review DR/DRA hardware and engagement requirements for the actual wheels. Respect rear-only applications and measure body/suspension clearance. Confirm whether stated width is per spacer or per axle before planning the change. Hydraulics, Ignition and Suspension For brake hoses, compare position, fittings and routing. For plugs or thermostats, match the fitted engine’s full plug specification or housing/seal requirements separately. A shock excluding self-leveling equipment requires confirmation against the installed system and exact chassis. Bulbs need the specified voltage, wattage, base and lamp function. Choose Your Part Identify SL chassis and fitted engine. Match space...

Choose Mercedes-Benz 380SE brake and wheel-spacing components using actual calipers, rotors, hubs and wheels. Physical application comes before compound, finish or spacer width. Brake Geometry and Compound Compare rotor diameter, thickness, offset and mounting at each axle. Identify fitted calipers and pad backing shape rather than relying on another model’s rotor reference. Choose friction material for intended driving use after fit is confirmed. Review exact package contents and manufacturer preparation and bedding instructions. Wheel-Spacer and Electrical Checks Match pattern, center bore, centering, thread, bolt seat and engagement. Review DR/DRA fastening requirements and measure clearance using current wheel width, offset and tires. For bulbs, verify exact voltage, wattage, base and lamp function. Conflicting descriptions require manufacturer-specification confirmation rather than a guess. Choose Your Part Identify chassis and fitted brake assemblies. Compare complete rotor g...

Plan Mercedes-Benz 380SEC wheel-spacing, ignition and suspension service from the actual coupe configuration. Fastener differences and equipment exclusions must be checked individually. Spacers and Wheel Hardware Compare exact DR/DRA design, bolt pattern, center bore, thread and wheel-bolt seat. Review engagement and required fasteners in the kit instructions. Respect any rear-only restriction. Measure clearance using actual wheel width, offset and tire size, and confirm width convention and supplied quantity. Ignition, Lighting and Suspension Match spark plugs to the fitted engine’s thread, reach, seat, heat range and required gap. For bulbs, verify voltage, wattage, base and lamp function. For rear shocks, establish actual chassis support and suspension type. A product excluding self-leveling equipment should not be treated as a direct replacement for that system. Choose Your Part Identify coupe chassis and installed engine. Match spacer fastening and exact bolt interfaces. Respe...

Compare Mercedes-Benz 380SEL brake and wheel-spacing options using the exact installed assemblies. Identify the physical application before choosing friction material or final wheel position. Brake Assembly and Service Contents Match front and rear calipers, pad backing shape and rotor geometry independently. Include rotor material, diameter, thickness, offset and mounting in the review. Compare complete kit contents and required hardware. Choose compound for actual driving use and follow exact manufacturer preparation and bedding guidance. Wheel Interfaces and Lighting For spacers, match pattern, bore, centering, thread, wheel-bolt seat and engagement. Different fastening systems and threads require their specified hardware. Measure wheel/tire clearance and confirm width convention. For bulbs, independently verify voltage, wattage, base, lamp function and package quantity. Choose Your Part Identify chassis and actual brake assemblies. Compare pad and full rotor geometry. Match spa...

Choose Mercedes-Benz 380SL brake-service and wheel-spacing components for the exact roadster and installed equipment. Review hydraulic and wheel interfaces separately from lighting requirements. Brake Dimensions and Driving Use Identify fitted calipers and compare pad backing shape before choosing compound. Match rotor diameter, thickness, offset and mounting at the required axle. Review intended use, compatible friction materials and exact preparation and bedding instructions. Confirm pair versus individual-component contents and required hardware. Spacer Hardware and Bulb Specification Compare pattern, bore, centering, exact thread, wheel-bolt seat and engagement. Review DR/DRA instructions and any rear-only restriction before selecting width. Measure clearance with actual wheels and tires. For bulbs, verify voltage, wattage, base and lamp function, resolving conflicting descriptions through manufacturer specifications. Choose Your Part Identify roadster chassis and brake equipme...

Compare Mercedes-Benz 380SLC brake and wheel-spacing components for the actual coupe and installed equipment. Rotor geometry, spacer fasteners and lamp specifications need independent selection. Brakes and Friction Use Identify calipers and pad shape, then match rotor diameter, thickness, offset and mounting at each axle. A shared reference does not establish the complete brake package. Choose compound for intended driving use after physical fit. Review required hardware and exact preparation and bedding instructions. Wheel Interfaces and Lighting Compare spacer pattern, bore, centering, thread, wheel-bolt seat and engagement. Follow DR/DRA fastening instructions and measure clearance with the actual wheels and tires. For bulbs, verify voltage, wattage, base and lamp function. Confirm spacer-width convention and package quantities separately. Choose Your Part Identify coupe chassis and brake equipment. Compare full rotor geometry and pad shape. Match spacer fasteners and measured c...

Choose Mercedes-Benz 400E ignition and wheel-spacing components using the installed engine and actual wheels. Package quantities and spacer restrictions require separate checks. Ignition and Lighting Service Confirm engine application before comparing plug material or package size. Match the required dimensional and operating specification and count the complete engine service quantity. For bulbs, verify exact voltage, wattage, base and lamp function. Use the manufacturer specification to resolve inconsistent descriptions. Spacer System and Axle Coverage Compare DR/DRA fastening design, pattern, center bore, thread, seat and engagement. Different thread options must match the actual vehicle and wheel hardware. Respect rear-only restrictions and measure clearance with the fitted wheels and tires. Confirm whether width is per piece or per axle before choosing the final position. Choose Your Part Identify fitted engine and required ignition specification. Check bulb rating and base. M...

Compare Mercedes-Benz 420SEL brake and wheel-spacing requirements using exact chassis, calipers and wheels. Fit and fastening details come before compound or spacer-width selection. Friction Components and Service Identify pad backing shape and fitted calipers, then compare rotor material and required operating use. Confirm each axle separately. Review clips, sensors and other required hardware against the exact package. Use manufacturer preparation and bedding instructions for the chosen combination. Wheel Interfaces and Electrical Specification For spacers, match pattern, bore, centering, thread, seat and engagement. Review DR/DRA hardware and measure clearance with the actual wheel width, offset and tires. For bulbs, verify exact electrical rating, base and lamp function. Confirm whether advertised spacer width is per piece or per axle and check supplied quantities. Choose Your Part Identify chassis and actual brake package. Match pad shape and intended compound use. Compare spa...

Compare Mercedes-Benz 450SL brake and wheel-spacing components using the actual roadster and installed equipment. Exhaust-service references require their own vehicle and installation review. Hydraulic and Friction Components Match brake-hose fittings, position, length and routing. For pads and rotors, identify calipers, backing shape and full rotor geometry separately. Choose friction material for intended driving use and review required hardware, preparation and bedding instructions. Wheel Fit and Exhaust Layout For DR/DRA spacers, compare pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheels and tires and confirm width convention. For a universal converter, verify exact vehicle/emissions application, inlet/outlet layout, sensor provisions and installation space. A universal label is not a complete 450SL application. Choose Your Part Identify roadster chassis and actual brakes. Match hose fittings and rotor geometry. Review spacer faste...

Choose Mercedes-Benz 450SLC brake and wheel-spacing components for the exact coupe and installed equipment. Hydraulic, wheel and exhaust applications should be checked separately. Brake Connections and Geometry Compare brake-hose end fittings, length, routing and service position. Identify fitted calipers and pad backing shape before choosing compound. For rotors, match diameter, thickness, offset and mounting. Confirm required hardware and preparation and bedding instructions for the actual friction combination. Spacers and Converter Planning Review DR/DRA spacer fastening design, bore, pattern, thread, seat and engagement. Measure wheel/tire clearance and confirm per-piece or per-axle width convention. For a universal converter, confirm exact vehicle/emissions support as well as inlet/outlet arrangement, sensor provisions and physical installation space. Choose Your Part Identify coupe chassis and brake equipment. Match hose and friction-component interfaces. Review spacer fasten...

Compare Mercedes-Benz 500E ignition and wheel-spacing options using the exact engine, wheels and installed brake package. Do not infer component fit from another model’s shared reference. Ignition and Brake Application Confirm the installed engine’s plug specification before comparing material or box quantity. Determine the complete service quantity separately. For brake pads, identify calipers, backing shape and rotor material. Select compound for actual use only after physical application is established. Spacers and Electrical Service Match DR/DRA fastening design, pattern, bore, thread, wheel-bolt seat and engagement. Respect rear-only restrictions and measure clearance with current wheels and tires. Verify bulb voltage, wattage, exact base and lamp function. Confirm spacer-width convention and package quantity rather than assuming one figure describes every installation. Choose Your Part Identify engine and fitted brake package. Confirm ignition specification and full service q...

Choose Mercedes-Benz 500SEC brake and wheel-spacing components using the actual coupe equipment. Caliper side, hydraulic connections and wheel hardware need separate identification. Side-Specific Calipers and Hoses For a rear-right caliper, confirm exact side, axle, mounting and rotor package. A right-side reference should not be treated as a complete rear-axle pair. Match hose fittings, routing and service position independently. Compare pad backing shape and rotor material before choosing friction compound. Wheel Interfaces and Routine Service For DR/DRA spacers, compare pattern, bore, centering, thread, bolt seat and engagement. Measure actual wheel/tire clearance and confirm required hardware. For plugs and bulbs, identify engine specification or lamp electrical rating separately. Package quantities do not determine the full vehicle service requirement. Choose Your Part Identify coupe and fitted brake equipment. Match caliper side and hydraulic interfaces. Compare spacer hardwa...

Compare Mercedes-Benz 500SEL brake-service parts using exact caliper position and rotor dimensions. A complete brake repair requires checking individual components and package contents. Caliper and Hydraulic Position Identify front/rear and left/right caliper application, mounting and rotor package. A rear-right component is separate from a complete axle set. Match hose fittings, length, routing and service position. Review required seals, clips and fasteners against the exact package contents. Rotors and Friction Material Compare rotor diameter, thickness, offset and mounting independently at each axle. Confirm the actual caliper and pad backing shape before choosing compound. Use manufacturer intended-use, rotor-compatibility and preparation guidance. A pad or rotor listing should not be assumed to provide every required service component. Choose Your Part Record actual caliper and rotor identification. Match side and axle precisely. Compare hose fittings and routing. Review fric...

Plan Mercedes-Benz 500SL ignition and EFI projects using the exact SL chassis, engine and injection system. Wheel-spacing and bulb applications require their own checks. EFI Support and Ignition Service A universal EFI kit needs confirmation for actual fuel delivery, controls, engine condition and calibration. Compare bottle-equipped and bottleless versions by complete contents. For plugs, match the installed engine’s required specification and service quantity. A jet-rating label is not a guaranteed output or proof that a kit supports the vehicle. Spacers and Headlamp Bulbs Compare DR/DRA fastening design, pattern, bore, thread, bolt seat and engagement. Measure clearance using actual wheel width, offset and tires. For an H1 bulb, match exact base, voltage, wattage and lamp requirements. Color designation alone does not establish suitability or authorize a different electrical load. Choose Your Part Identify SL chassis and installed injection system. Review EFI support and complet...

Choose Mercedes-Benz 560SEC brake and wheel-spacing parts using the exact coupe and installed equipment. Side-specific calipers and spacer systems need independent application checks. Caliper Position and Brake-Service Parts Identify rear-left or rear-right caliper, mounting and rotor package before choosing a replacement. Match hose end fittings, length and routing separately. Compare pad backing shape and rotor material before selecting compound. Review exact hardware contents and manufacturer installation and bedding guidance. Spacer Interfaces and Lighting Match pattern, bore, centering, thread, wheel-bolt seat and engagement. Review DR/DRA fastening instructions and measure clearance with actual wheels and tires. For bulbs, verify exact voltage, wattage, base and lamp function. Resolve conflicting ratings using the manufacturer specification rather than the similar-looking title. Choose Your Part Identify coupe and fitted brakes. Match caliper side and hose interfaces. Review ...

Compare Mercedes-Benz 560SEL brake, wheel-spacing and lighting-service requirements using the actual assemblies. Select side-specific hydraulic components before comparing finishes or compound labels. Hydraulic Position and Friction Fit Record caliper side, axle, mounting and rotor package. A rear-right replacement should not be substituted for another position without explicit support. Match hose fittings, routing and length separately from pad backing shape. Review required hardware and the exact operating-use and bedding guidance for the selected friction components. Wheel Fastening and Electrical Ratings For spacer options, compare DR/DRA design, pattern, bore, centering, thread, wheel-bolt seat and engagement. Confirm width convention and measure clearance with the fitted wheels and tires. For bulbs, verify exact electrical rating, base and function. Package quantity and similar part numbers do not replace the lamp’s actual specification. Choose Your Part Identify chassis and ...

Choose Mercedes-Benz 560SL brake and wheel-spacing parts using exact caliper position, rotor package and driving use. Road-service and dedicated race-pad options need different operating reviews. Caliper Position and Friction Choice A rear-right caliper needs the correct side, mounting and rotor application. Match rear hoses by fittings, length and routing separately. Compare pad backing shape first, then choose compound for intended use. DTC-70, DTC-60 and Blue 9012 race references should not be treated as default road-service substitutes. Rotor Compatibility and Wheel Interfaces Match rotor material and geometry to the chosen pads. Follow the exact preparation, installation and bedding procedure for the installed combination. For wheel spacers, identify fastening design, bore, pattern, thread, bolt seat and engagement. Measure clearance with actual wheels and tires before choosing width. Choose Your Part Identify fitted calipers and rotor package. Match rear caliper side and hose...

Choose Mercedes-Benz C220 wheel, alignment and lighting components using exact generation, fuel type and fitted equipment. A shared C-Class reference does not establish every application. Spacers and Alignment Hardware Compare spacer pattern, bore, centering, thread, wheel-bolt seat and engagement. Review exact DR/DRA fastening instructions and measure wheel/tire clearance. For a camber/caster cam, identify the actual suspension location and supported adjustment function. It is separate from a complete control arm or an automatic cure for worn suspension components. Lighting and Engine Identity For a W202 taillight reference, confirm body, connector and mounting application before choosing finish. Bulbs require their own voltage, wattage, base and lamp-function check. For any ignition inquiry, identify petrol or diesel powertrain first. A spark-plug reference does not establish a service item for a diesel engine. Choose Your Part Identify generation, body and fuel type. Match space...

Compare Mercedes-Benz C230 suspension and brake-service components using exact generation, body and drivetrain. A damper application excluding 4Matic must be respected. Dampers and Protective Components Match front damper mounts, travel and chassis coverage, including the stated 4Matic exclusion. Confirm the actual drivetrain before selecting the component. Boots and bump stops are protective service parts, separate from complete dampers. Review kit contents, retained mounts and installation requirements. Brake Kits and Electronic Accessories For pad-and-rotor kits, compare caliper, pad shape, rotor dimensions and axle coverage. Confirm pairs, hardware and sensor contents before planning the repair. For pedal-control accessories, match the exact supported chassis, connector and harness. Another Mercedes application does not establish C230 support. Choose Your Part Identify body, generation and drivetrain. Respect 4Matic damper exclusions. Separate protective parts from complete dam...

Choose Mercedes-Benz C240 dampers and brake components using the actual chassis, drivetrain and fitted assemblies. Application exclusions and complete kit contents should be reviewed before purchase. Front Suspension Service Identify drivetrain before choosing a front damper. An application excluding 4Matic should not be extended to that configuration. Compare mounts, travel, retained components and protective boots or bump stops separately. A protective kit does not supply a complete replacement strut. Rotors, Friction and Accessory Fit Match rotor diameter, thickness, offset and mounting to the actual caliper. Compare pad backing shape and exact axle coverage before choosing compound. For an electronic pedal accessory, confirm supported year/chassis and connector. Existing electronic modifications need a separate manufacturer review. Choose Your Part Record chassis and actual drivetrain. Check front-damper application and exclusions. Compare protective and complete suspension con...

Plan Mercedes-Benz C280 suspension and brake service using exact chassis, drivetrain and current equipment. Front-damper exclusions and rotor geometry are independent selection requirements. Dampers and Strut Protection For the displayed front-damper family, respect the stated 4Matic exclusion and verify actual drivetrain. Compare mounts, travel and supported production coverage. For boots and bump stops, identify service position and exact contents. Review retained mounts, sleeves and fasteners rather than assuming a full strut assembly is supplied. Brake Geometry and Compound Use Match calipers, pad backing shape and rotor dimensions at each axle. A pad/rotor kit must identify exact axle and complete supplied components. Choose compound for actual driving use and compatible rotor material. For pedal-control products, compare the exact supported connector and harness separately. Choose Your Part Identify chassis and drivetrain. Respect damper equipment exclusions. Separate boots/m...

Compare Mercedes-Benz C32 AMG brake components using the fitted W203 calipers, rotor package and intended driving use. Other AMG or shared pad references require their own exact application check. Front and Rear Friction Fit The displayed C32 AMG references identify 2002–2004 W203 front-pad applications. Confirm exact production and backing shape, then identify rear components independently. Match rotor material, dimensions and mounting to the chosen pads. A compound label does not identify every brake-package variation. Operating Use and Electronic Accessories Review manufacturer intended-use, preparation and bedding guidance before changing compound. Compare required sensors and hardware against exact contents. For a pedal-control accessory, confirm supported chassis, pedal connector and harness. A product for another Mercedes family should not be assumed compatible with the C32. Choose Your Part Identify W203 production and fitted brake equipment. Match front and rear pad applic...

Choose Mercedes-Benz C320 suspension and brake-service components by exact chassis, body and drivetrain. Front-damper equipment restrictions and complete kit contents require separate checks. Dampers and Protective Pieces Confirm the actual drivetrain before selecting a front damper with a stated 4Matic exclusion. Match chassis, mounting and travel using the exact manufacturer application. Boots and bump stops are separate protective service components. Compare retained mounts, sleeves and fasteners rather than assuming a complete strut assembly is supplied. Brake Geometry and Kit Contents Match caliper, pad backing shape and complete rotor dimensions at the required axle. Review pad-and-rotor kit coverage and any supplied sensors or hardware. For pedal-control accessories, confirm the exact chassis, connector and harness independently of brake or suspension applications. Choose Your Part Identify chassis, body and drivetrain. Respect front-damper 4Matic exclusions. Separate protec...

Compare Mercedes-Benz C36 AMG brake, alignment and wheel-spacing components using the exact chassis and installed equipment. Replacement ignition parts need a separate engine specification check. Brakes and Alignment Components Match caliper, pad backing shape and full rotor geometry before choosing a friction kit. Confirm exact axle coverage, hardware and sensor contents. For an alignment cam, identify the supported location, adjustment function and installation requirements. It is separate from a complete control arm or a repair for worn suspension joints. Spacers and Ignition Service Compare DR/DRA fastening design, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheels and tires. For plugs, match installed engine and required dimensional/operating specification. Confirm service quantity separately from a four-plug box. Choose Your Part Identify chassis and fitted brakes. Confirm alignment-cam location and function. Compare spacer hardw...

Compare Mercedes-Benz C43 AMG exhaust and brake options using exact generation, body and engine. A W205 exhaust application does not establish support for every C43 configuration. Exhaust and Valve-Accessory Contents AWE identifies W205 C43 applications within its C400/C450/C43 exhaust suite. Match exact system number, body and existing exhaust equipment. The displayed electronic valve-simulator package states two units. Confirm that the exact simulators are required and supported for the chosen system rather than treating them as exhaust valves or mufflers. Brake Equipment and Service Interfaces Match rotor diameter, thickness, offset and mounting to the fitted calipers. Compare pad backing shape, axle coverage and any AMG Sport equipment notes. Sensor wires and installation hardware need their own connection and contents checks. Choose friction material for intended use after exact fit is established. Choose Your Part Identify generation, body and engine. Confirm W205 exhaust sys...

Choose Mercedes-Benz C55 AMG brake and chassis-service components using the fitted assemblies rather than another AMG model’s shared reference. Suspension, alignment and wheel interfaces need separate checks. Brake and Damper Applications Match caliper, pad backing shape and rotor package before comparing compounds. A C32 reference does not establish every C55 brake application. For front dampers, verify exact chassis and equipment support, including stated drivetrain restrictions. Compare mounts and travel independently of brake fit. Alignment Cams and Spacers For a camber/caster cam, identify supported location, adjustment function and installation procedure. Inspect worn joints and mounting hardware as part of alignment planning. For DR/DRA spacers, match pattern, bore, centering, thread, bolt seat and engagement. Measure current wheel/tire clearance before choosing width. Choose Your Part Identify fitted C55 brake and suspension equipment. Match pad geometry and damper applicat...

Compare Mercedes-Benz CLK320 brake and suspension-service components using exact generation, body and installed equipment. Kit names and shared family references do not establish complete application coverage. Brake-Kit Geometry and Contents Match fitted calipers, pad backing shape and rotor diameter, thickness, offset and mounting. Identify front and rear applications independently. For a pad-and-rotor kit, confirm supplied axle, pair quantity, hardware and sensors. Compare compound for intended driving use after physical fit. Suspension and Pedal Interfaces For dampers, match exact chassis, drivetrain, mounts and travel; respect any 4Matic exclusion. Boots and bump stops are separate protective service pieces. For electronic pedal accessories, compare supported chassis, connector and harness independently. Review existing electronic changes and exact installation instructions. Choose Your Part Identify generation, body and drivetrain. Match brake geometry and axle coverage. Revie...

Choose Mercedes-Benz CLK350 brake and chassis components using exact body, generation and actual wheel equipment. Brake geometry and wheel spacing require independent measurements. Friction and Suspension Applications Identify calipers, pad backing shape and full rotor dimensions before selecting a kit. Confirm axle coverage, pairs and required hardware. For suspension dampers or boots, compare exact chassis, drivetrain restrictions, mounts and service position. A protective kit is separate from a complete damper. Wheel-Spacer and Electronic Fit Match DR/DRA fastening design, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheel width, offset and tire size. Pedal-control accessories require their own supported chassis, harness and connector. Include existing modifications in that review. Choose Your Part Identify body, generation and drivetrain. Match brake geometry and kit contents. Check damper restrictions and protective pieces. Review ...

Plan Mercedes-Benz CLK430 brake service from the fitted calipers and rotor dimensions. Compare kit contents and intended compound use separately from physical application. Pads and Rotor Geometry Identify caliper, pad backing shape and rotor material before choosing friction components. Compare front and rear specifications independently. Match rotor diameter, thickness, offset and mounting. A shared product family or slotted finish does not identify the exact installed package. Complete Kits and Accessory Application For pad-and-rotor sets, confirm axle coverage, supplied quantity, sensors and hardware. Review exact manufacturer preparation and bedding guidance. For an electronic pedal accessory, confirm supported chassis and connector rather than relying on another Mercedes-family title. Include any existing electronic modifications. Choose Your Part Identify fitted calipers and rotor material. Compare complete rotor geometry by axle. Review kit quantity, sensors and hardware. Co...

Compare Mercedes-Benz CLK500 brake, ignition and wheel-spacing components using exact generation and installed equipment. Engine and wheel applications need separate confirmation from brake fit. Friction and Protective Service Parts Match caliper, pad backing shape and rotor dimensions by axle. Choose compound for actual driving use after physical application is established. For strut boots, identify service position and exact contents. Protective pieces do not provide a complete damper or correct worn mounts automatically. Spacers and Ignition Specification Compare DR/DRA system, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance with actual wheels and tires. For spark plugs, match the fitted engine’s required specification and complete service quantity. Material or box count alone does not determine application. Choose Your Part Identify generation, engine and fitted brakes. Match friction geometry and protective contents. Review spacer fasteners and me...

Choose Mercedes-Benz CLK55 AMG brake and suspension-service components using exact production and fitted calipers. Competition pad references require a separate operating-use review. Race-Pad and Road-Service Choices The displayed DTC-60 front-pad reference identifies 2005–2006 CLK55 AMG coverage. Confirm exact calipers, pad shape and rotor package before choosing it. Compare race operating requirements with actual use. A similar backing shape across compounds does not establish identical road behavior or rotor preparation. Sensors and Damper Application Match brake-sensor connector, length, routing and service position independently from pad fit. Review complete hardware contents. For front dampers, confirm exact chassis support, mounts, travel and drivetrain restrictions. Electronic pedal accessories need separate supported connector and harness confirmation. Choose Your Part Identify production and installed calipers. Match exact front-pad application and rotor material. Choose ...

Compare Mercedes-Benz CLK550 suspension, brake and wheel-spacing parts using exact body, drivetrain and installed equipment. Shared AMG or C-Class references need specific support. Dampers, Boots and Friction Fit Match front-damper chassis, mounts, travel and stated drivetrain exclusions. Compare protective boots and retained components separately from complete assemblies. Identify actual calipers, pad backing shape and rotor material before selecting friction compound. Another model’s brake reference does not establish every CLK550 application. Wheel Interfaces and Electronic Accessories For DR/DRA spacers, compare pattern, bore, centering, thread, bolt seat and engagement. Measure clearance with the fitted wheel width, offset and tires. For pedal-control accessories, confirm exact supported chassis, connector and harness independently. Existing electronic changes need review before installation. Choose Your Part Identify body, drivetrain and current suspension. Match damper restr...

Choose Mercedes-Benz E300 brake-service parts using the exact chassis and brake equipment. Separate rotor geometry, friction use and installation hardware before comparing complete kits. Rotor and Caliper Identification Record the installed front and rear calipers and rotor dimensions. Another E-Class or GLC rotor reference does not establish E300 compatibility without exact manufacturer support. Compare mounting, thickness, overall height and any equipment exclusions. Determine pad backing shape from the installed caliper rather than from compound name. Friction Kits and Supporting Parts For EBC S5 Yellowstuff/GD references, check exact application, axle and supplied contents. Review intended use, rotor preparation and bedding instructions. Match wear-lead connectors and routing, rear hardware and protective boots independently. A boot package should not be treated as a complete damper assembly. Choose Your Part Identify chassis, production and installed brakes. Compare rotor geom...

Compare Mercedes-Benz E320 rear rotors, friction kits and protective suspension parts by exact generation and installed equipment. Broad production coverage requires a component-specific application check. Rear Rotor Dimensions A visible DFC E320 rear Geomet rotor reference spans 1994–2011. Confirm the exact rotor number and supported brake configuration rather than extending that range to every E320. Compare diameter, thickness, overall height and parking-brake arrangement. Check front components independently and include any brake conversions when identifying the assembly. Friction and Suspension Protection For EBC S5 Yellowstuff/GD kits, confirm axle, caliper application and complete contents. Review operating use and manufacturer bedding requirements. Front or front/rear protective boot references need their own exact damper application. Inspect retained mounts, bump stops and other components according to the installation instructions. Choose Your Part Identify exact E320 gene...

Choose Mercedes-Benz E420 brake and suspension-protection parts using exact production and fitted assemblies. Component identification matters more than shared E-Class naming when comparing applications. Rear Rotors and Friction Kits Compare installed rear-rotor diameter, thickness, overall height and parking-brake arrangement. An E320 rotor reference requires explicit E420 support before selection. For EBC S5 Yellowstuff/GD kits, confirm exact axle, pad backing shape, rotor compatibility and contents. Review intended use and the manufacturer’s preparation and bedding instructions. Protective Boots and Service Hardware Match front or front/rear boot packages to the actual dampers and mounting arrangement. Review bump stops, mounts and fasteners separately from the protective parts supplied. Compare wear-lead connectors, routing and service position against the installed brakes. Front friction and rotor applications require their own geometry and caliper checks. Choose Your Part Ide...

Choose Mercedes-Benz E430 brake components by installed caliper, rotor dimensions and exact production. A related E-Class application should be confirmed against the proposed manufacturer part number. Rear Rotors and Parking-Brake Geometry Match rear-rotor diameter, thickness, overall height and parking-brake arrangement. An E320 rear-rotor reference does not establish E430 fit without manufacturer confirmation. Identify front brake components separately. Include original part numbers and any brake conversion details when requesting an application check. Friction Kits and Pedal Accessories For EBC S5 Yellowstuff/GD kits, compare exact vehicle coverage, axle, pad backing shape and rotor contents. Review driving use and manufacturer bedding instructions. Pedal-control accessories need an independently supported chassis, connector and harness. A fitment reference for another Mercedes family is insufficient for the E430. Choose Your Part Identify production and fitted front/rear brakes...

Choose Mercedes-Benz E55 AMG friction parts by exact generation and installed calipers. A shared supercharged-engine or AMG reference does not identify every front and rear brake application. Pad Shape Before Compound Choice Record front and rear calipers, pad backing shape and rotor material. Confirm exact E55 support before selecting parts also referenced for CL55 or C32 models. Compare compound use only after fit is established. Review road or competition operating requirements and manufacturer rotor preparation and bedding instructions. Protective Components and Electronics For strut boots, confirm actual damper application and supplied protective pieces. Inspect retained mounts and bump stops according to the installation requirements. Pedal-control accessories require exact chassis, connector and harness support. Include existing electronic changes when requesting application review. Choose Your Part Identify exact E55 generation and brake equipment. Match pad backing shape a...

Choose Mercedes-Benz SLK230 wheel-spacing and ignition parts by exact production and installed equipment. Confirm full fastener and plug specifications before selection. Spacer Fastening and Clearance Compare DR/DRA fastening method, pattern, bore and centering. Match exact wheel-bolt thread, seat and required engagement rather than spacer width alone. Measure clearance with current wheels, tires and suspension. A 12x1.5 reference should not be exchanged for 14x1.5, even with a matching bolt pattern. Ignition, Alignment and Lighting Match spark-plug reach, seat, heat range and specified gap for the exact engine. Confirm required quantity independently from package count. Alignment hardware needs exact arm/service-position support. For bulbs, match base, voltage, wattage and lamp application; pedal accessories need separate electronic coverage. Choose Your Part Identify production, engine and current wheel setup. Confirm spacer system and exact fastening specification. Measure clear...

Choose Mercedes-Benz SLK280 brake kits and spacers by exact production and installed assemblies. Related E-Class or C-Class references require specific roadster support. Rotor and Friction Kit Identification Match actual front/rear calipers, pad backing shapes and rotor material. Compare diameter, thickness, height and mounting independently at each axle. For EBC S5 Yellowstuff/GD kits, confirm exact application, axle and complete pad/rotor contents. Review intended use and manufacturer bedding instructions. DR/DRA Fasteners and Electronics Confirm exact spacer fastening system, pattern, bore, centering, wheel-bolt thread and seat. Measure clearance using current wheels, tires and suspension. Pedal-control accessories require separate exact chassis, connector and harness support. Review brake sensors and installation hardware independently from spacer contents. Choose Your Part Identify production and fitted brake assemblies. Match full rotor geometry and kit axle. Confirm spacer s...

Choose Mercedes-Benz SLK32 AMG brake, spacer and alignment parts using exact installed equipment. Shared friction references need explicit AMG roadster support. Calipers and Compatible Friction Match front/rear calipers, pad backing shapes and rotor material independently. A similar Crossfire SRT6 reference does not establish every SLK32 application. Compare supported Redstuff, Yellowstuff or competition use after physical fit. Review full rotor geometry, sensors and manufacturer bedding requirements. Spacer and Alignment Interfaces For DR/DRA spacers, confirm system, pattern, bore, centering, exact thread and wheel-bolt seat/engagement. Measure clearance with current wheels and suspension. Camber/caster hardware needs exact arm and service-position support. Electronic pedal accessories require separate chassis and harness confirmation. Choose Your Part Identify actual AMG brake and suspension equipment. Match backing shapes, rotor material and use. Confirm spacer fasteners, center...

Compare Mercedes-Benz SLK320 brake kits, wheel-spacing and ignition parts by exact production and installed assemblies. Confirm each application independently. Brake Kits and Rotor Geometry Match actual calipers, pad backing shapes and rotor material before selecting friction. A Crossfire reference requires explicit SLK320 manufacturer support. For EBC S5 Yellowstuff/GD kits, compare exact axle, rotor diameter/thickness/height/mounting and supplied contents. Review intended use and bedding instructions. Spacers and Spark-Plug Specification For DR/DRA spacers, match system, pattern, bore, centering, exact fasteners and measured clearance. Follow instructions for the specified fastening method. Select spark plugs by exact engine application, reach, seat, heat range and specified gap. Confirm required quantity separately from four-plug boxes. Choose Your Part Identify production and fitted brakes. Match kit axle, rotor geometry and complete contents. Confirm spacer interfaces and meas...

Choose Mercedes-Benz SLK350 friction and rotor kits by exact generation and fitted calipers. Shared C-Class or CLA references need specific SLK support. Front and Rear Brake Matching Identify backing shape and rotor material independently at each axle. Compare complete rotor dimensions and mounting before selecting a kit. For S5 Yellowstuff/GD references, confirm exact production, axle and supplied pads/rotors. Another model’s compound label does not establish physical fit. Operating Use and Electronic Interfaces Review intended compound use, compatible rotor material and manufacturer bedding instructions. Match wear leads, clips and installation hardware separately. Pedal-control accessories require exact generation, connector and harness support. Include electronic modifications and any brake conversions when requesting application help. Choose Your Part Identify generation and actual brake assemblies. Match pad shape and complete rotor geometry. Review kit axle, intended use and...

Compare Mercedes-Benz SLK55 AMG brake compounds by exact generation and installed performance package. A shared backing shape does not establish one friction choice for every use. Brake Package and Compound Use Identify actual front/rear calipers, pad backing shapes and rotor material. CLK55 or CLK63 references need exact SLK55 coverage, including relevant package exclusions. Compare HPS, Performance Ceramic, HP+ or DTC-60 options only after application is confirmed. Review the manufacturer’s road/competition operating requirements and compatible rotor guidance. Rear Service and Electronics Match rear-pad geometry and full rotor dimensions independently from front coverage. Review wear-lead connectors, routing and required hardware. Pedal-control accessories need exact chassis, connector and harness support. Include current electronic and brake modifications when asking for application guidance. Choose Your Part Identify generation and actual performance package. Match backing shap...

Wheel spacers and wheel adapters for cars, trucks, and SUVs are stocked at Black Ops Auto Works. Shop hub centric wheel spacers, bolt on and slip on spacers, wheel adapters that change bolt pattern, and forged aluminum spacers ranging from 5mm to 2 inch thickness for BMW, Audi, Volkswagen, Porsche, Subaru, Toyota, Ford, and Chevrolet platforms from Spidertrax, Motorsport Tech, ECS Tuning, and Black Ops Auto Works. Every wheel spacer and adapter is filterable by year, make, model, trim, bolt pattern, and hub bore so the correct thickness, offset change, and stud or bolt pattern ships the first time. Black Ops Auto Works carries 643 wheel spacer and adapter SKUs across bolt on, slip on, and adapter categories. What This Collection Covers Wheel spacers move the wheel outward from the hub to correct fitment issues like brake caliper clearance, fender clearance for wider tires, or a wider, more aggressive stance. Wheel adapters go a step further and change the bolt pattern entirely, ...

Shop aftermarket wheels, tires, lug nuts, wheel spacers, hub rings, TPMS sensors, valve stems, and wheel accessories at Black Ops Auto Works. Find performance wheels and tires for street cars, trucks, SUVs, muscle cars, imports, off-road vehicles, and custom builds from trusted automotive brands. Aftermarket Wheels for Cars, Trucks, and SUVs Choose cast, flow-formed, forged, replica, off-road, and performance wheels in a wide range of diameters, widths, offsets, finishes, bolt patterns, and center bores. Our selection supports applications from daily-driven vehicles and sports cars to lifted trucks, SUVs, drift builds, and track vehicles. Performance Tires for Street, Track, and Off-Road Use Shop tires for summer performance, all-season driving, winter conditions, touring, towing, off-road terrain, and high-performance applications. Match tire size, load rating, speed rating, tread design, compound, and seasonal use to the vehicle and driving conditions. Wheel Fitment, Offset, and ...