Hawk 08-11 BMW 128i / 10 BMW 323i / 07-11 BMW 328i / 07-11 BMW 328XI DTC-70 Race Rear Brake Pads

Shop BMW 128i parts for the naturally aspirated 3.0L application, with intake, brake and suspension choices matched to body and equipment. Distinguish its induction system from turbocharged 135i components. Intake and Filter Service Injen applications include specified early E82 128i intake kits. Match engine identification, production coverage, airflow-meter connection and the supplied heat shield or mounting pieces. Confirm the installed housing before ordering a replacement filter. An aftermarket intake element can differ from the factory panel filter in both shape and connection. Brakes and Suspension Planning Compare street and competition brake compounds only after confirming caliper, pad shape, rotor dimensions and axle. A rotor-and-pad kit may not include sensors or all fitting hardware. For dampers, mounts or coilovers, record Coupe or Convertible body and use the exact chassis application. Check kit contents, spring compatibility and alignment requirements, including any e...

Explore BMW 328i parts by generation, engine and body. Earlier six-cylinder cars and later turbocharged four-cylinder applications need different induction, service and exhaust choices. Separate the Engine Applications Record the engine identification before choosing an intake, ignition component or service filter. A later turbocharged application should not be transferred to an earlier naturally aspirated engine. Compare air-meter fittings, breather connections, inlet routing and mounting. Where emissions equipment changes the application, use the manufacturer’s exact coverage. Plan Chassis and Exhaust Purchases Use sedan, coupe, convertible or wagon coverage for body-related components. An exhaust section must join the correct starting system and clear the actual bumper outlets. Select suspension by drivetrain and axle loads. Brake service needs its own caliper, rotor, pad-shape and sensor checks before comparing compounds or kit contents. Choose Your Part Identify generation, en...

Shop BMW 328i xDrive parts with the all-wheel-drive chassis and exact engine identified. Intake, charge-air and suspension purchases need generation-specific coverage. Match the Petrol Engine The 328i name includes different engine generations. For turbocharged F30 applications, compare the stated N20 or N26 coverage, sensor fittings and breather connections. Injen intake configurations can differ in airbox, scoop and filter contents. Review the complete kit and its service-filter requirements before choosing a finish. Account for All-Wheel Drive Select springs or coilovers with explicit xDrive coverage, body and axle-load limits. Front driveline clearance is part of the installation requirement. For an exhaust or charge pipe, compare routing and mounting with the installed system. A rear-wheel-drive application should not be extended without manufacturer coverage. Choose Your Part Identify engine, chassis and body. Compare intake connections and kit contents. Require xDrive suspen...

Choose BMW 328xi parts for the all-wheel-drive six-cylinder 3 Series. Body, engine and emissions specification help distinguish the correct induction and chassis applications. Induction by Engine and Body Identify the actual engine and emissions equipment before comparing intake kits. A listing for an E92 coupe needs its exact engine and drivetrain coverage confirmed for the car being serviced. Compare meter connections, filter location and heat-shield mounting. A throttle controller is a separate pedal-interface device; verify its connector and application. All-Wheel-Drive Chassis Service Use xi-specific suspension coverage and the correct sedan, coupe or wagon application. Axle loads, damper type and front driveline clearance matter when changing ride height. Window accessories and exterior trim need exact body coverage. For brakes, identify the installed caliper, rotor dimensions and axle before choosing sensors or hardware. Choose Your Part Identify AWD chassis, engine and emis...

Choose BMW X1 parts by chassis generation, engine and sDrive or xDrive configuration. Brake and accessory applications vary across the model’s different layouts. Brake Dimensions and Connections Record rotor diameter, thickness, caliper and pad shape for each axle. A 335 mm rotor listing applies only where the actual brake assembly and manufacturer coverage match. Brake hoses and wear sensors also need correct length, routing and connections. Confirm shared BMW or Mini applications against the installed assembly. Engine Accessories and Chassis Generation Match engine accessories to the actual engine, management and connections. Separate a complete injection system from a plate or conversion component requiring an existing setup. Suspension coverage needs exact generation, drivetrain, axle loads and damper equipment. An sDrive or xDrive badge without chassis information does not settle every mounting or clearance requirement. Choose Your Part Identify chassis, engine and drivetrain....

Brake pads and brake shoes for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop ceramic pads, semi-metallic pads, full metallic and racing compounds, low-dust street pads, big brake kit pads, OE-replacement pads, and drum brake shoes for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, and import platforms. Every pad set is filterable by year, make, model, trim, and caliper type (OE floating caliper, Brembo fixed caliper, big brake kit caliper) so the correct compound and shape ships the first time. Black Ops Auto Works carries 4,351 brake pad and brake shoe SKUs across street, sport, and track compounds. What This Category Covers Brake pads are the most frequently replaced brake component and the single highest-value brake upgrade for most drivers. Swapping stock pads for a quality ceramic or semi-metallic compound produces an immediate improvement in stopping distance, pedal feel, and fade resistance wit...

Racing brake pads for track cars, wheel-to-wheel racers, time-attack builds, and HPDE-committed drivers are stocked at Black Ops Auto Works. Shop sprint-race compounds, endurance-race compounds, wet-weather compounds, HPDE and track-day compounds, and pro-series pads from Hawk Performance, EBC Racing, PFC, Ferodo Racing, Endless, Carbotech, Wilwood, Pagid Racing, Alcon, Rotora, DBA, and StopTech Racing. Every product is filterable by year, make, model, race series, caliper family, and pad compound so the correct pad ships the first time. Black Ops Auto Works carries 792 racing brake pad SKUs across sprint, endurance, wet-weather, HPDE, and pro-series compounds. What This Collection Covers Racing brake pads are the top tier of the pad hierarchy above OE-comfort and street-performance compounds. They are engineered for maximum friction and fade resistance at 900 degree-plus rotor temperatures at the expense of cold bite, quietness, pad life, and rotor friendliness. This collection...

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

Shop Hawk Performance brake pads, Talon brake rotors, performance brake kits, and high-temperature brake fluid at Black Ops Auto Works. The Hawk Performance collection covers street vehicles, performance cars, trucks, SUVs, autocross builds, track-day vehicles, and dedicated race applications. Choose every component by exact vehicle fitment, axle position, brake package, pad shape, compound, and intended driving use. Hawk Performance Brake Pads and Components Hawk Performance offers multiple friction compounds developed for different braking environments. This collection includes HPS, HPS 5.0, Performance Ceramic, LTS, SuperDuty, HP Plus, HPX, DTC, ER-1, HT-10, and Blue 9012 brake pads. It also includes Talon rotors, matched pad-and-rotor kits, and DOT 4 brake fluids for compatible applications. There is no single best compound for every vehicle. A quiet daily driver, heavy tow vehicle, autocross car, and dedicated road-race car place very different demands on the braking system. Co...