Hawk 2006-2006 BMW 330i HPS 5.0 Rear Brake Pads

Shop BMW 330i parts by engine generation and body. Earlier six-cylinder cars and later turbocharged four-cylinder models need separate intake, exhaust and service applications. Exhaust Scope and Engine Coverage G2X AWE Touring selections include axle-back exhaust applications with specific production coverage. An axle-back changes the rear portion; compare retained pipework and the exact sections supplied. Check tip finish, bumper-outlet arrangement and mounting before deciding on appearance. An earlier 330i body or engine is a different exhaust application. Intake and Chassis Planning For induction components, compare engine identification, sensor connections and breather fittings. Record the housing if an aftermarket intake is already installed. Select springs and dampers by body, drivetrain and axle loads. Brake components need the installed rotor and caliper application before pad compound and sensor choices are made. Choose Your Part Identify engine, chassis and body. Compare ...

Choose BMW 330xi parts by all-wheel-drive generation, engine and body. Induction, suspension and exterior accessories each need their own application details. Engine and Induction Requirements Identify the actual six-cylinder engine and installed intake before choosing service filters or induction hardware. Compare sensor fittings, breather connections and mounting clearance. For a pedal controller, confirm the exact accelerator connector and supported vehicle application. Its response adjustment serves a different purpose from an intake or engine calibration. AWD Chassis and Body Accessories Use xi-specific spring and damper coverage, body and axle-load limits. An earlier or later all-wheel-drive generation should not be treated as the same chassis application. Window visors and trim depend on door and window layout. Brake pads, rotors and sensors should instead follow the installed caliper, axle and electrical connection. Choose Your Part Identify AWD generation, engine and body....

Shop BMW 335d parts for the six-cylinder diesel 3 Series. Separate engine generation and drivetrain before planning brake service, charge-air or chassis work. Diesel Engine and Charge-Air Details The U.S. E90 335d uses a 3.0-liter six-cylinder diesel. Induction and cooling purchases need the specific diesel engine and system connections, not petrol 335i coverage. Compare charge-air couplings, sensor ports and mounting for the exact installation. Keep existing engine and emissions equipment documented when choosing service components. Rotors and Lighting Equipment Hawk Talon front-rotor applications identify the E90 335d separately. Match axle, rotor diameter, thickness and height to the installed caliper before comparing surface designs. DRL modules need their stated chassis, headlamp and production coverage. A later 3 Series module is not established as suitable for an E90 simply by sharing the brand. Choose Your Part Identify diesel engine generation and drivetrain. Match charge-...

Find BMW 335i parts by engine generation, body and current build specification. N54 and N55 induction, charge-air and exhaust applications need separate consideration. Identify N54 or N55 Use engine identification to distinguish the twin-turbo N54 from the later N55 installation. Intake connections and charge-air hardware should follow that engine application. Record existing intake, charge pipe, intercooler and calibration changes before choosing companion components. For ignition service, use the required plug specification and any documented tuner requirements. Choose the System You Need Compare a complete exhaust with an axle-back, mid-pipe or conversion section. Check body routing, joining points, valve operation and the pieces retained from the existing system. For chassis work, match suspension and brakes to the actual body and drivetrain. Identify calipers and rotor material before comparing pad compounds or sensor kits. Choose Your Part Identify engine, body and drivetrain...

Choose BMW 335i xDrive parts with both the turbocharged engine and all-wheel-drive chassis identified. Engine and drivetrain coverage are separate checks within the same build. Engine and Charge-Air Configuration Establish N54 or N55 and the current intake, intercooler and charge-pipe arrangement. Match couplings, sensor ports and breather connections to the installed equipment. For an ignition or calibration-related purchase, retain the documented build requirements. A shared displacement does not establish compatibility across the engine generations. xDrive Installation Requirements Suspension must explicitly cover xDrive, the body and axle loads. Review front driveline clearance, damper travel and alignment requirements before changing ride height. Exhaust and engine accessories can have drivetrain-sensitive routing or clearance. Compare the exact installation instructions with the car’s existing configuration. Choose Your Part Identify N54 or N55 and body. Record charge-air and...

Shop BMW 335is parts for the N54-powered E92 coupe or E93 convertible. Distinguish its engine, transmission and cooling equipment before planning upgrades. N54 and Transmission Details BMW retained the twin-turbo N54 in the 335is. Do not transfer a later 335i N55 intake or charge-air application without explicit 335is coverage. Identify manual or dual-clutch transmission when choosing driveline components. Review the complete assembly and installation requirements rather than selecting by engine alone. Cooling and Body Configuration The 335is has enhanced cooling equipment. Identify the circuit and original component before choosing a radiator, oil-cooling component, hose or related upgrade. Exhaust and suspension choices need coupe or convertible coverage. Compare valve operation, pipe sections, axle loads and mount condition as part of the installation plan. Choose Your Part Confirm N54 and E92 or E93 body. Identify manual or dual-clutch transmission. Record installed cooling cir...

Find BMW 335xi parts for the turbocharged all-wheel-drive 3 Series. Match the exact engine and body before choosing induction or drivetrain-sensitive components. Twin-Turbo Induction Applications For an N54 installation, compare the complete inlet arrangement, meter or sensor provisions, heat shielding and mounting. A twin-inlet kit has a different application from a later single-inlet design. Use the kit’s stated body and production coverage. A coupe listing needs explicit confirmation for another body or the xi drivetrain. AWD Chassis and Controls Select suspension with xi coverage and correct axle loads. Review front-axle clearance and the manufacturer’s permitted lowering and alignment requirements. For a pedal controller, verify the accelerator connector and supported vehicle. Response adjustment is separate from increasing engine output or changing the engine calibration. Choose Your Part Identify engine, body and xi drivetrain. Compare twin-inlet connections and mounting. Ch...

Choose BMW X1 parts by chassis generation, engine and sDrive or xDrive configuration. Brake and accessory applications vary across the model’s different layouts. Brake Dimensions and Connections Record rotor diameter, thickness, caliper and pad shape for each axle. A 335 mm rotor listing applies only where the actual brake assembly and manufacturer coverage match. Brake hoses and wear sensors also need correct length, routing and connections. Confirm shared BMW or Mini applications against the installed assembly. Engine Accessories and Chassis Generation Match engine accessories to the actual engine, management and connections. Separate a complete injection system from a plate or conversion component requiring an existing setup. Suspension coverage needs exact generation, drivetrain, axle loads and damper equipment. An sDrive or xDrive badge without chassis information does not settle every mounting or clearance requirement. Choose Your Part Identify chassis, engine and drivetrain....

Brake pads and brake shoes for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop ceramic pads, semi-metallic pads, full metallic and racing compounds, low-dust street pads, big brake kit pads, OE-replacement pads, and drum brake shoes for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, and import platforms. Every pad set is filterable by year, make, model, trim, and caliper type (OE floating caliper, Brembo fixed caliper, big brake kit caliper) so the correct compound and shape ships the first time. Black Ops Auto Works carries 4,351 brake pad and brake shoe SKUs across street, sport, and track compounds. What This Category Covers Brake pads are the most frequently replaced brake component and the single highest-value brake upgrade for most drivers. Swapping stock pads for a quality ceramic or semi-metallic compound produces an immediate improvement in stopping distance, pedal feel, and fade resistance wit...

Performance brake pads for daily-driven sport cars, sport trucks, tow rigs, and occasional track-day builds are stocked at Black Ops Auto Works. Shop ceramic performance pads, semi-metallic performance pads, street-track dual-purpose pads, and extra-duty compounds for Hellcat, Trackhawk, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct pad ships the first time. Black Ops Auto Works carries 2,777 performance brake pad SKUs across ceramic, semi-metallic, street-track, and extra-duty categories. What This Collection Covers Performance brake pads sit between the OE-comfort tier (quietest, longest life, lowest bite) and the racing tier (highest bite, shortest life). This collection is the correct starting point for enthusiast street builds, sport trucks, and occasional track use. Pad Categories Street performance pads, street-track pads, high-friction ceramic pads, semi-metallic performance pa...

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

Shop Hawk Performance brake pads, Talon brake rotors, performance brake kits, and high-temperature brake fluid at Black Ops Auto Works. The Hawk Performance collection covers street vehicles, performance cars, trucks, SUVs, autocross builds, track-day vehicles, and dedicated race applications. Choose every component by exact vehicle fitment, axle position, brake package, pad shape, compound, and intended driving use. Hawk Performance Brake Pads and Components Hawk Performance offers multiple friction compounds developed for different braking environments. This collection includes HPS, HPS 5.0, Performance Ceramic, LTS, SuperDuty, HP Plus, HPX, DTC, ER-1, HT-10, and Blue 9012 brake pads. It also includes Talon rotors, matched pad-and-rotor kits, and DOT 4 brake fluids for compatible applications. There is no single best compound for every vehicle. A quiet daily driver, heavy tow vehicle, autocross car, and dedicated road-race car place very different demands on the braking system. Co...