Click to zoom in
Secure Wheel Mounting with the Correct Stud Dimensions
This H and R wheel stud is for universal applications that require an M12x1.5 thread, a 35mm thread length, and a 14.35mm knurl diameter. The 1253554 configuration is sold as one stud, so confirm the hub and wheel hardware specifications before ordering.
Key Features
- H and R wheel stud for compatible wheel hubs
- M12x1.5 thread specification
- 35mm thread length
- 14.35mm knurl diameter
- Silver finish as listed for this configuration
- Single stud package for replacement or custom wheel hardware work
Fitment
| Years | Make | Model | Position | Requirements |
|---|---|---|---|---|
| Universal | Any | Compatible vehicle | Wheel hub | Requires M12x1.5 thread and 14.35mm knurl. Confirm factory specifications. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 1253554 |
| Thread | M12x1.5 |
| Thread Length | 35mm |
| Knurl Diameter | 14.35mm |
| Finish | Silver |
| Package Quantity | 1 wheel stud |
What's Included
- One H and R wheel stud
About H and R
H and R develops wheel fastening and suspension components for motorsport, performance, and street applications. Its wheel hardware range uses application specific thread, seat, and dimensional specifications that must be matched to the vehicle hub.
FAQ
What is the 1253554?It is a wheel stud with the dimensions shown in the specifications table.
What thread does this stud use?The stud uses an M12x1.5 thread.
How long is the threaded section?The listed thread length is 35mm.
What knurl diameter is required?The listed knurl diameter is 14.35mm.
How many studs are included?The package contains one wheel stud.
Is this a vehicle specific part?No. It is a universal hardware component. Match the thread, knurl, length, and hub design before purchase.
Can it replace any wheel stud?No. The replacement must match the original hub design and the required thread and knurl dimensions.
What should be checked before installation?Confirm the hub bore, thread engagement, knurl fit, wheel clearance, and the vehicle manufacturers installation procedure.
Installation Instructions
- Verify the thread, length, knurl diameter, and hub requirements against the vehicle service information.
- Support the vehicle safely and remove the wheel and any hardware blocking access to the hub.
- Remove the original stud using the approved service method for the hub.
- Clean the stud bore and inspect the hub for damage or distortion.
- Install the replacement stud squarely so the knurl seats fully without damaging the hub.
- Reinstall the wheel and compatible nuts, then tighten them in the vehicle manufacturers specified sequence and torque.
- Lower the vehicle and recheck fastener torque after the initial road test according to the service procedure.
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
H&R
H&R suspension parts are stocked at Black Ops Auto Works, including Sport lowering springs, VTF adjustable springs, Street and Sport coilovers, Trak+ wheel spacers, and wheel bolts. H&R is a German suspension manufacturer founded in 1984 known for progressive-rate lowering springs and matched coilover systems. Every product is filterable by year, make, model, trim, and drivetrain so the correct H&R part ships the first time. Black Ops Auto Works carries 1,486 H&R SKUs spanning European, Japanese, domestic, and EV platforms. What This Collection Covers H&R Special Springs manufactures its lowering springs in Germany using a progressive-rate design that lowers ride height while retaining the compliance needed for daily driving on imperfect road surfaces. TUV and ECE certifications support compliance on European applications, and decades of testing on German roads and race tracks back the brand's handling reputation. Product Categories Sport lowering springs, Ra...
View H&R Products
Wheels & Tires
Wheels and tires for cars, trucks, SUVs, Jeeps, and custom builds are stocked at Black Ops Auto Works. Shop forged wheels, flow-formed wheels, cast wheels, truck wheels, off-road wheels, performance tires, all-terrain tires, mud-terrain tires, wheel spacers, hubcentric rings, lug nuts, valve stems, and TPMS sensors for Hellcat, Trackhawk, TRX, Wrangler, F-150, Silverado, and Tacoma platforms. Every product is filterable by bolt pattern, offset, diameter, width, tire size, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 13,150 wheel and tire SKUs across construction types, styles, and sizes. What This Category Covers Wheels and tires change a vehicle's stance, handling, and appearance more than any other single upgrade. Wheel-and-tire fitment is also the modification most affected by measurement accuracy, so confirm bolt pattern, center bore, offset, width, diameter, and fender clearance before ordering. Wheel Cons...
View Wheels & Tires Products