Husky Liners 25-26 Ford Expedition Weatherbeater Front & 2nd Seat Floor Liners - 3 Piece - Black

Three-Piece Weatherbeater Floor Liner Set for the 2025 and 2026 Ford Expedition

The Husky Liners 96191 is a three-piece Weatherbeater front and second seat floor liner set in black, precision laser-scanned and custom-molded for the 2025 and 2026 Ford Expedition. The Husky Liners 96191 covers the driver floor, passenger floor, and second row seating area in a single purchase, protecting all three zones from mud, spills, snow, and debris. The 96191 is built from Husky's ProGard rubberized thermoplastic material, which stands up to gas, oil, battery acid, and extreme temperatures without cracking, curling, or losing shape. StayPut Nibs lock the 96191 into the factory carpet anchors for a no-slide hold. Made in the USA. Backed by a Husky Liners Lifetime Warranty.

Weatherbeater Construction on the 2025 and 2026 Expedition

The Husky Liners 96191 uses Husky's FormFit Design process, where the factory floorboard geometry of the 2025 and 2026 Ford Expedition is three-dimensionally scanned to produce a liner that fits edge to edge with zero visible gap. The patented FormFit Edge raises the liner border at every perimeter edge to contain spills and prevent liquid from migrating under the liner to the carpet below. The rubberized thermoplastic construction of the 96191 is pliable in freezing temperatures and does not crack or become brittle under the winter conditions that destroy lesser floor liners. The 96191 pulls out easily for cleaning, hose it down and it is ready to reinstall.

What's Included

• 1 x Husky Liners 96191 driver front floor liner
• 1 x Husky Liners 96191 passenger front floor liner
• 1 x Husky Liners 96191 second row floor liner

Specifications

Fitment

Frequently Asked Questions

Does the Husky Liners 96191 fit the 2025 and 2026 Expedition Max (extended wheelbase)?
The 96191 covers the front and second row only. Expedition Max owners may need a separate third row liner. Confirm your specific Expedition configuration (standard or Max) fits the 96191 front and second row positions before ordering.

Does the Husky Liners 96191 work with the Ford Expedition's factory floor retention posts?
Yes. The 96191 is designed to engage with the factory carpet retention posts and floor anchor points on the 2025 and 2026 Ford Expedition. The StayPut Nibs on the bottom surface also bite into the factory carpet to hold the liner in place independently of anchor posts.

Can I use the Husky Liners 96191 over factory rubber floor mats?
No. The 96191 is designed to sit directly on the factory carpet. Installing floor liners over existing mats creates a layered, unstable surface that can interfere with the driver's ability to operate the pedals safely.

How do I clean the Husky Liners 96191?
Remove the 96191 liners from the vehicle, rinse with water, and wipe dry. The ProGard thermoplastic material does not absorb liquids and does not require any special cleaning products. For heavy soiling, use a mild soap and a brush.

Does the Husky Liners 96191 crack or curl in cold weather?
No. The 96191 ProGard thermoplastic material is formulated to remain flexible at low temperatures without cracking, curling, or deforming. It is designed for use across the full range of temperatures encountered in North American climates.

Will the Husky Liners 96191 protect against large spills like coffee or full drink containers?
Yes. The patented FormFit Edge raises the liner border along every perimeter edge to contain liquids. The raised lip prevents spills from migrating off the liner surface onto the factory carpet beneath.

Does the Husky Liners 96191 come with a warranty?
Yes. The 96191 is backed by the Husky Liners Lifetime Warranty. Husky will replace any 96191 that fails due to defects in material or workmanship under normal use.

Is the Husky Liners 96191 made in the USA?
Yes. The Husky Liners Weatherbeater 96191 is manufactured in the USA.

Install Instructions

Remove any existing floor mats from the front and second row of the 2025 or 2026 Ford Expedition. Locate and engage any factory floor anchor posts in the corresponding holes on the 96191 liner. Press the liner firmly into position so the StayPut Nibs engage the factory carpet surface. Confirm the liner lies flat, all edges are seated correctly, and the driver-side liner does not interfere with pedal travel before driving. The second row liner installs in the same manner, seat the anchor holes over any factory posts and press flat. No drilling or permanent modification is required.

California Residents: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.