Husky Liners HBMJ20TG Guardian Comfort Tailgate Mat 2020-2025 Jeep Gladiator

The Husky Liners HBMJ20TG Guardian Comfort Tailgate Mat is a custom-fit tailgate protection mat for the 2020, 2021, 2022, 2023, 2024, and 2025 Jeep Gladiator all trims including Sport, Sport S, Overland, Rubicon, Mojave, and Willys. The HBMJ20TG covers your Gladiator's tailgate with a 1/4 inch thick polypropylene DriGard surface that cushions knees, grips cargo, and resists UV, moisture, chemicals, and stains. Installs in minutes with a hook-and-loop system no drilling, no adhesive, no surface prep. Made in the USA with global materials. Backed by Husky Liners' Limited Lifetime Warranty. Pairs with the Guardian Comfort bed mat for full bed and tailgate coverage.

What the Husky Liners HBMJ20TG Does

The HBMJ20TG is engineered for the specific tailgate dimensions of the Jeep Gladiator. It is part of Husky Liners' Guardian Comfort series the same line that covers the bed floor so the DriGard surface texture, thickness, and protection level are identical across the tailgate and bed when both are used together. On its own, the HBMJ20TG solves the two biggest tailgate problems: cargo sliding and scratching the tailgate finish. The DriGard surface grips whatever you load, and the 1/4 inch closed-cell foam backing absorbs impact so fragile gear does not bottom out against bare metal.

DriGard Surface Technology

Husky Liners' proprietary DriGard top layer is what separates the HBMJ20TG from generic rubber mats and spray-in coatings. DriGard is engineered with integrated UV resistance so it will not crack, fade, or go brittle in the Florida sun. It resists moisture so water runs off instead of soaking in. It handles chemical spills bleach, fertilizer, fuel, oil without staining or degrading. Unlike a spray-in liner that is permanent and eventually chips, or a drop-in liner that traps water and corrodes your tailgate from underneath, the HBMJ20TG lifts out cleanly for inspection and reinstalls in seconds.

Key Features

• Custom-fit for 2020-2025 Jeep Gladiator all trims, full tailgate coverage
• Proprietary DriGard polypropylene top layer soft, grippy, carpet-like feel
• 1/4 inch thick closed-cell polypropylene foam construction
• UV resistant, moisture resistant, chemical resistant, stain resistant, odor resistant
• Hook-and-loop installation no drilling, no adhesive, no surface prep
• Fits bare tailgates, spray-on lined tailgates, and drop-in liner tailgates
• Factory tie-down anchors can be re-installed through the mat
• Pairs with the Guardian Comfort bed mat for seamless full-bed coverage
• Spray-off cleaning no removal required
• Made in the USA with global materials
• Husky Liners Limited Lifetime Warranty

Installation

The Husky Liners HBMJ20TG installs in 30 minutes or less. The hook-and-loop attachment system positions the mat precisely on the tailgate and holds it firmly without any drilling, sanding, or adhesive. Factory Jeep Gladiator tie-down anchors can be re-installed directly through the mat, or you can cut small slits to fit around them no anchor function is lost. Works on bare steel tailgates, spray-on coated tailgates, and drop-in liner surfaces. No special tools required.

Fitment for Husky Liners HBMJ20TG

The HBMJ20TG fits every trim level of the 2020-2025 Jeep Gladiator. The Gladiator's tailgate dimensions are consistent across all trims and all model years in this range. Verify your model year before ordering.

Full Specifications

About Husky Liners

Husky Liners has been manufacturing vehicle protection products in the USA since 1988. Their Guardian Comfort line uses proprietary DriGard material engineered specifically for truck bed and tailgate applications not repurposed carpet or generic rubber. Every Guardian Comfort product is custom-fit to the specific vehicle rather than trimmed from a universal sheet, which means the HBMJ20TG covers the Jeep Gladiator tailgate edge to edge without gaps.

Frequently Asked Questions About the Husky Liners HBMJ20TG

Does the Husky Liners HBMJ20TG fit the Jeep Gladiator Rubicon?
Yes. The HBMJ20TG is confirmed to fit the Jeep Gladiator Rubicon for all model years 2020 through 2025. The Rubicon uses the same tailgate as every other Gladiator trim, so fitment is identical across Sport, Overland, Rubicon, Mojave, Willys, and all limited edition trims.

Will the HBMJ20TG work on a Gladiator with a spray-on bed liner on the tailgate?
Yes. The HSLHBMJ20TG is designed to fit bare metal tailgates, spray-on coated tailgates, and drop-in liner surfaces. The hook-and-loop attachment system grips all three surface types without modification.

Does the Husky Liners HBMJ20TG interfere with the Gladiator's factory tie-down anchors?
No. Factory Jeep Gladiator tie-down anchors can be re-installed through the HSLHBMJ20TG after fitting. Alternatively, cut small slits in the mat to fit around the anchor hardware. No tie-down functionality is lost.

Do I need the Guardian Comfort bed mat to use the HBMJ20TG?
No. The HBMJ20TG works as a standalone product. It is also designed to pair directly with the Husky Liners Guardian Comfort bed mat so the DriGard surface extends from the bed floor to the tailgate in a single continuous look. If you load and unload cargo across the tailgate regularly, running both together is the recommended setup.

How is the Husky Liners HBMJ20TG different from a rubber tailgate mat?
Standard rubber mats are heavy, stiff, and tend to slide. The HBMJ20TG uses Husky Liners' DriGard polypropylene construction lighter than rubber, softer on knees and cargo, and engineered with UV and chemical resistance built into the material rather than added as a coating that can wear off. It also installs with hook-and-loop rather than sitting loose, so it stays positioned under load.

How do I clean the Husky Liners HBMJ20TG?
Spray it down with a garden hose or pressure washer while it is still on the tailgate. No removal needed. The DriGard polypropylene surface does not absorb water, will not mold or mildew, and resists chemical and organic staining. For heavier buildup, a stiff brush with mild soap works well.

Is the Husky Liners HBMJ20TG covered under warranty?
Yes. The HBMJ20TG is backed by Husky Liners' Limited Lifetime Warranty against defects in materials and workmanship for the life of the product.

Does the HBMJ20TG fit the 2024 or 2025 Jeep Gladiator Mojave X?
Yes. The HBMJ20TG is confirmed to fit the 2024 and 2025 Jeep Gladiator Mojave X. All Gladiator trim levels from 2020 through 2025 share the same tailgate dimensions, so fitment applies to the full lineup including the Mojave X, Rubicon X, NightHawk, High Tide, and all other trims added in the 2024 and 2025 model years.

Can the HBMJ20TG be used on a Gladiator with an aftermarket tailgate?
The HBMJ20TG is custom-fit to the factory Jeep Gladiator tailgate dimensions. If you have replaced your factory tailgate with an aftermarket unit that has different dimensions or a different surface profile, fitment is not guaranteed. Contact Husky Liners directly to confirm compatibility with non-OEM tailgates.