Click to zoom in
The ICON suspension system identified by manufacturer part number K93093T is engineered for the exact vehicle applications shown below. Match the year, make, model, drivetrain, suspension configuration, axle position, lift range, and every application note before ordering.
Key Features
- Tubular Upper Control Arms: Strong steel construction corrects geometry for 0-3in lift improves alignment and caster for stable steering and reduced tire wear.
- 0-3 Inch Lift Capability: Bolt-on system levels the truck enhances suspension articulation and works with stock wheels/tires up to 35in diameter.
- 2.5 Series Front Coilover Shocks: Internal reservoir design with Compression Damping Control Valve (CDCV) allows 10 levels of compression adjustability for customizable damping and extended travel without fade.
- Patented Delta Joint: Heavy-duty high-angle ball joint in tubular UCAs combines ball joint durability with uniball performance zinc-plated housing and grease seal resist corrosion for noise-free long-term operation and greater angularity.
- 2.5 Series Rear Shocks: Remote reservoir shocks with CDCV provide consistent damping under heavy loads and high-speed off-road use matching front coilover performance.
- System weight approximately 118 lbs ships freight-free via ground carrier.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | Confirm drivetrain, suspension, axle position, lift height, factory options, and every requirement for this exact part number |
Specifications
| Brand | ICON |
|---|---|
| Manufacturer Part Number | K93093T |
| Product Type | Suspension Packages |
| Fitment Type | Vehicle Specific |
| Condition | New |
| Product Family | Stage 3 |
What's Included
One new ICON suspension system package identified by manufacturer part number K93093T, in the position, finish, configuration, and quantity stated by the title. Opposite-side components, springs, reservoirs, controllers, hardware, wheels, tires, and service parts are included only when expressly listed for this exact part number.
About ICON
ICON Vehicle Dynamics develops suspension systems, coilovers, shock absorbers, control arms, lift components, wheels, and service parts for trucks, SUVs, and off-road vehicle applications.
Related ICON Products
- Shop all ICON products
- ICON 2015+ Ford F-150 4WD 0-2.63in Stage 2 Suspension System w/Billet Uca
- ICON 2015+ Ford F-150 2WD 0-3in Stage 3 Suspension System w/Billet Uca
- ICON 2015+ Ford F-150 4WD 0-2.63in Stage 2 Suspension System w/Tubular Uca
Frequently Asked Questions
Does this kit fit both 2WD and 4WD models?
Only when both drivetrains are listed for the exact part number. Match drivetrain, axle, cab, suspension package, and every application note.
What lift height will this ICON part provide?
Use only the lift or travel range stated for the exact part number. Final ride height also depends on vehicle weight, options, spring setting, and companion components.
Does the package include both sides?
A pair is included only when the title or package contents says pair or kit. Products marked single, driver side, or passenger side include only that component.
Installation Instructions
Read the current ICON instructions for part number K93093T. Verify the complete application and package contents, support the vehicle safely, use the specified hardware and torque values, check hose and reservoir routing, confirm suspension and tire clearance through the full range of travel, align the vehicle when required, and recheck all fasteners after initial use.
ICON
Shop ICON Vehicle Dynamics suspension systems, coilovers, shock absorbers, control arms, lift springs, steering components, wheels, and service parts by exact manufacturer part number and verified application.Choosing the Correct ICON Part Match the complete ICON manufacturer part number Confirm the canonical year, make, and model plus every application note Verify drivetrain, axle, cab, factory suspension, payload, and special-package requirements Confirm front or rear position, lift range, shock series, damping configuration, and package quantity For wheels, verify diameter, width, bolt pattern, offset, backspacing, center bore, load rating, and brake clearance Related Collections ICON products Coilovers Shocks and struts Control arms Frequently Asked QuestionsHow do I confirm an ICON suspension part fits my vehicle?Match the exact part number, year, make, model, drivetrain, axle, factory suspension package, lift height, position, and every current application note.Does an ICON sh...
View ICON Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Suspension Packages
Complete suspension packages for street, track, truck, SUV, and off-road builds are stocked at Black Ops Auto Works. Shop matched coilover packages, sport lowering kits, lift and leveling systems, shock packages, handling kits, control arm packages, and staged suspension upgrades for cars, trucks, Jeeps, SUVs, and performance vehicles. Every product is filterable by year, make, model, trim, drivetrain, and suspension configuration. This collection spans Mustang, Camaro, Corvette, GM truck, Ford truck, Jeep, Toyota truck and SUV, European sport compact, and domestic performance applications. What This Suspension Packages Collection Covers Matched component systems Suspension packages pair components engineered to work together, which simplifies planning and reduces the risk of mixing incompatible parts. They can include coilovers or shocks, springs, control arms, sway bars, endlinks, alignment parts, and lift hardware. Street and Sport Lowering Packages Balanced handling and ride...
View Suspension Packages Products